Our 20G IV Cannula sets the standard for secure and efficient intravenous access. This medical device boasts a finely-calibrated 20-gauge size, offering a delicate balance between patient comfort and rapid fluid delivery. Crafted from biocompatible materials, it reduces the likelihood of allergic reactions or infections. The cannula's sharp, beveled tip ensures minimal pain during insertion, enhancing patient comfort. Equipped with secure wings for stability during placement and a color-coded hub for quick size identification, it simplifies the medical process. Packaged sterile for aseptic handling, our 20G IV Cannula is the trusted choice of healthcare professionals, guaranteeing reliable and precise vascular access for a wide range of medical needs.
IV Cannula : IV Cannula With Wings & Injection Port (18G, 20G, 22G) - IV Cannula With Wings & Injection Port (24G) - IV Cannula With Wings & Without Injection Port {Neo} (24G) - IV Cannula With Wings & Injection Port (26G) - IV Cannula With Wings & Without Injection Port {Neo} (26G)
IVWP-14 IV Cannula 14G ( With Wing & Injection Port) IVWP -16 IV Cannula 16G ( With Wing & Injection Port) IVWP -18 IV Cannula 18G ( With Wing & Injection Port) IVWP -20 IV Cannula 20G ( With Wing & Injection Port) IVWP -22 IV Cannula 22G ( With Wing & Injection Port) IVWP-24 IV Cannula 24G ( With Wing & Injection Port) IVWP-26 IV Cannula 26G ( With Wing & Injection Port) IVSW -24 IV Cannula 24G ( With Small Projection Wing & Without Injection Port) IVSW -26 IV Cannula 26G ( With Small Projection Wing & Without Injection Port)
IVWP-14 IV Cannula 14G ( With Wing & Injection Port) IVWP -16 IV Cannula 16G ( With Wing & Injection Port) IVWP -18 IV Cannula 18G ( With Wing & Injection Port) IVWP -20 IV Cannula 20G ( With Wing & Injection Port) IVWP -22 IV Cannula 22G ( With Wing & Injection Port) IVWP-24 IV Cannula 24G ( With Wing & Injection Port) IVWP-26 IV Cannula 26G ( With Wing & Injection Port) IVSW -24 IV Cannula 24G ( With Small Projection Wing & Without Injection Port) IVSW -26 IV Cannula 26G ( With Small Projection Wing & Without Injection Port)
IVWP-14 IV Cannula 14G ( With Wing & Injection Port) IVWP -16 IV Cannula 16G ( With Wing & Injection Port) IVWP -18 IV Cannula 18G ( With Wing & Injection Port) IVWP -20 IV Cannula 20G ( With Wing & Injection Port) IVWP -22 IV Cannula 22G ( With Wing & Injection Port) IVWP-24 IV Cannula 24G ( With Wing & Injection Port) IVWP-26 IV Cannula 26G ( With Wing & Injection Port) IVSW -24 IV Cannula 24G ( With Small Projection Wing & Without Injection Port) IVSW -26 IV Cannula 26G ( With Small Projection Wing & Without Injection Port)
Code 86310: Cannula fixation and injection plaster. Non-woven adhesive dressing with absorbent pad Features 1. Sterile and adhesive as required for firmly securing cannulas used for hypodermic injections. 2. Laid on a non-woven hypoallergenic backing to be fitted with a central pad which facilitates the introduction of the hypodermic needle. 3. Waterproof but air permeable-shielding out water, dirt and germs. Color: White Size: 6x8 cm
Individual blister pack. 100pcs/inner box, 5000pcs/export carton Carton Dimension: 51x45x23 Loading Capacity for 1x40HQ: 1265 Ctns Sterile, non-toxic, non-pyrogenic. Sharp and strong needle cannula. Needle Gauge: 30G, 29G, 28G, 27G, 26G, 25G, 24G, 23G, 22G, 21G, 20G,19G,18G,16G. Needle Length: 1/2", 5/8", 3/4", 1", 1 1/4", 1 1/2"
Sterile Hypodermic Syringes with Needle for Single Use US$ 0.5 / Carton Get Freight Cost Calculate Margin 10000 Cartons Minimum Order : 20 - 90 days Product Details Model Number : ZS-05- H-SY 5ML-#3409 Brand Name : Winhealth Origin : China (mainland) Small Orders : Accepted Key Specifications/Special Features: Model No. ZS-01-H-SY 1ML, 3 ML, 5ML Brand Name: Winhealth Origin: China CE Approval Fast Delivery for Any Quantity Sterilization Independent Packaging Using Independent packaging ,after ethylene oxide sterilization, open ready tp use. All Sterile EO Processing with Single Blister Pack with Needle Pre-attached Different Sizes: 1ML, 3ML, 5ML Shipping Information: FOB Port: Shanghai Lead Time : 20 - 90 days HTS Code : 9018.31.00 Dimensions per Unit : 15 X 3 X 3 Centimeters Weight per Unit : 7 Grams Units per Export Carton : 1600 Export Carton Dimensions L/W/H: 48.5 X 40.5 X 45 Centimeters Export Carton Weight : 8.5 Kilograms Main Export Markets: Asia asia Central/South America Eastern Europe Mid East/Africa North America Western Europe Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks. Payment Details: Payment Method : Telegraphic Transfer in Advance (Advance TT, T/T)
Safety Insulin Syringe with Restractable Needle Safety Characteristics: after absorbing the expected dose of liquid medicine, if transportation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation; push the sliding sleeve to expose the needle tip before the injection starts, when the expected dose of liquid medicine is 100% injected, manually slide the sliding sleeve to the position where the connector base can no longer slide, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental needle sticking, and avoiding cross infection.
based on the typical characteristics of safety needles in the medical field, a "GRIPPER PLUS Safety Needle" might be designed to enhance safety during medical procedures involving needle use. Safety needles often incorporate features to minimize the risk of needlestick injuries for healthcare professionals. These features may include mechanisms to retract or shield the needle after use, reducing the potential for accidental exposure to contaminated needles. Additionally, such needles often prioritize ease of use, providing a secure grip for healthcare practitioners.
can provide some general information based on the components mentioned. HAKKO SONOGUIDE: HAKKO is a company that produces a range of medical products, including medical devices and equipment. PTC Needle (PTCB:18G*200mm): "PTC" likely refers to a percutaneous transluminal catheter or a similar medical device used for procedures like angioplasty. "18G*200mm" indicates the gauge and length of the needle. In this case, it suggests an 18-gauge needle with a length of 200mm.
Safety Insulin Pen Needle EO Sterilization Packaging Config : TBD Features and Benefits: Sterile pack, single use only. Caina patented product. Color coded for easy identification of needle sizes. Ultra-sharp needle tip minimizes patient discomfort. Needle stick prevention, safety assured. Unique needle lubrication process, most comfort injection. Mini design for easy carrying. Red indication for activation. All materials are latex & DEHP free.
Ultra-sharp, tri-bevelled, anti-coring needle; Stainless steel cannula; Metal insert increases needle strength for animal health applications; Coated with a Silicons Polymer; Sterile; Two pieces rigid pack; Cartridges are color-coded to follow industry standards providing easy gauge Identification OTHER SIZE ARE ALSO AVAILABLE
Safety Huber Needle Features and Benefits Sterile pack, single use only. Needle-stick prevention, safety assured. Special needle tip design to prevent rubber fragment contamination. Luer connector, equipped with needleless connector, heparin cap, Y three-way. Chassis sponge design for a more comfortable application. High pressure resistant central line with 325 P.S.I Two holes connector optional. MDR 2017/745 USA FDA 510K Refer Standards ISO 10555-6:2015 Intravascular catheters - Sterile and single-use catheters Part 6: Subcutaneous implanted ports. ISO 8536-4: 2010 Infusion equipment medical use- Part 4: Infusion Sets for single use, gravity feed. ISO 23908:2011 Sharps injury protection Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood Samplings. ISO 7864:2016 Sterile Hypodemic Needles for Single-use requirements and test methods. ISO 9626:2016 Stainless Steel Needle Tubing for the Manufacture of Medical Devices requirements and Test methods. ISO 80369-7: 2016 Small - bore connectors for liquids and gases in healthcare applications. Part 7: Connectors for intravascular or hypodermic applications. ISO 10993-7:2008 Biological Evaluation of Medical Device - Part 7: Ethylene Oxide Sterilization Residuals.
Standard Needle EO STERILIZATION Single Blister Package MOQ 200K Specification : 18G---30G Sterile blister pack, single use only ultra-sharp needle tip minimizes patient discomfort color coded for easy identification of needle sizes compatible with standard syringes customized sizes available 510K CE ISO
IV CANNULA Cannula are. PTFE Tubing-The Most Bio- Compatible Material, with longer indwelling time. PTFE has lowest co-efficient of friction, thereby smoothening the insertion. Port / Injection Valve with Non-return silicon valve for intermittent medication.
IV Cannula ON (without wings & without injection port) Size Available in 14G 16G 17G 18G 20G 22G 24G 26G Orange Color Grey Color White Color Green Color Pink Color Blue Color Yellow Color Violet Color