1X32 Mems Optical Switch Suppliers and Manufacturers

1x32 MEMS switch is a very fast opto-mechanical switch working over both telecom wavelength windows from 1240 nm to 1640 nm. The highly reliable switching mechanism is based on micromechanical mirrors and features below 1 ms switching time and only 1.5 dB insertion loss. The miniature package withstands rugged environments and is well suited for direct mounting on printed circuit boards. 1x32 MEMS optical switch FEATURES ��reliable ��1.5 dB insertion loss ��1 ms response time ��60 dB crosstalk ��non-latching 1x32 MEMS optical switch APPLICATIONS ��Source Selection ��Protection Switching ��Monitoring ��Wavelength provisioning 1x32 MEMS optical switch DESCRIPTION The non-latching 1x32 switch modules are fast and reliable switches designed for single mode fiber instrumentation and communication equipment. The device is based on the latest silicon MEMS technology and uses micro-mechanical mirrors to redirect the light. The absence of fatigue and wear-out allows to achieve a constant switching quality even after billions of actuation cycles. The switch features fast switching below 1 ms and high crosstalk attenuation above 60 dB. Repeatability is better than 0.01 dB. The switch is powered by a 5 V supply voltage. A 5 V TTL or CMOS drive signal is used to control the switching state. 1x32 MEMS optical switch TECHNICAL SPECIFICATIONS UnitMinTypMax Wavelength Rangenm12401640 Insertion LossdB1.52.5 CrosstalkdB6050 Back reflectiondB5545 Polarization Dependent LossdB0.25 Switching Timems0.51 Switching VoltageV5 Fiber Pigtailmm9/125 or 50/125 or 62.5/125 Durabilitycyclesno wear out Power ConsumptionmW1050 Operation Temperature°C070 Storage Temperature°C-4085

1x1 MEMS Optical Switches, 1x2 MEMS Optical Switches, 1x3 MEMS Optical Switches, 1x4 MEMS Optical Switches, 1x6 MEMS Optical Switches, 1x8 MEMS Optical Switches, 1x10 MEMS Optical Switches, 1x12 MEMS Optical Switches, 1x16 MEMS Optical Switches, 1x24 MEMS Optical Switches, 1x32 MEMS Optical Switches, 1x64 MEMS Optical Switches, 1Xn~128 MEMS Optical Switches, 2x2 MEMS Optical Switches, 2x4 MEMS Optical Switches, 2x8 MEMS Optical Switches, MxN MEMS Optical Switches, 4x4 MEMS Optical Switches, 6x6 MEMS Optical Switches, 8x8 MEMS Optical Switches, 10x10 MEMS Optical Switches, 12x12 MEMS Optical Switches, 13x13 MEMS Optical Switches, 16x16 MEMS Optical Switches, 24x24 MEMS Optical Switches, 32x32MEMS Optical Switches, 64x64 MEMS Optical Switches, 128x128 MEMS Optical Switches, MxM/N MEMS Optical Switches, 1X4 Optical Swich 1x4 Mechanical Fiberoptic Switch 1x4 Fiber Optical Switch 1X8 Optical Swich 1x8 Mechanical Fiberoptic Switch 1X8 Fiber Optical Switch 1X16 Optical Swich 1x16 Mechanical Fiberoptic Switch 1X16Fiber Optical Switch 1X24 Optical Swich 1x24 Mechanical Fiberoptic Switch 1X24 Fiber Optical Switch 1X32 Optical Swich 1x32 Mechanical Fiberoptic Switch 1X32 Fiber Optical Switch 1X64 Optical Swich 1x64 Mechanical Fiberoptic Switch 1X64 Fiber Optical Switch 4X4 Optical Switch 4X4 Mechanical Fiberoptic Switch 4X4 Fiber Optic Switch 8X8 Optical Switch 8X8 Mechanical Fiberoptic Switch 8X8 Fiber Optic Switch 16X16 Optical Switch 16x16 Mechanical Fiberoptic Switch 16x16 Fiber Optic Switch 32x32 Optical Switch 32X32 Mechanical Fiberoptic Switch 32X32 Fiber Optic Switch 64X64 Optical Switch 64X64 Mechanical Fiberoptic Switch 64X64 Fiber Optic Switch

1x1 MEMS Optical Switches, 1x2 MEMS Optical Switches, 1x3 MEMS Optical Switches, 1x4 MEMS Optical Switches, 1x6 MEMS Optical Switches, 1x8 MEMS Optical Switches, 1x10 MEMS Optical Switches, 1x12 MEMS Optical Switches, 1x16 MEMS Optical Switches, 1x24 MEMS Optical Switches, 1x32 MEMS Optical Switches, 1x64 MEMS Optical Switches, 1Xn~128 MEMS Optical Switches, 2x2 MEMS Optical Switches, 2x4 MEMS Optical Switches, 2x8 MEMS Optical Switches, MxN MEMS Optical Switches, 4x4 MEMS Optical Switches, 6x6 MEMS Optical Switches, 8x8 MEMS Optical Switches, 10x10 MEMS Optical Switches, 12x12 MEMS Optical Switches, 13x13 MEMS Optical Switches, 16x16 MEMS Optical Switches, 24x24 MEMS Optical Switches, 32x32MEMS Optical Switches, 64x64 MEMS Optical Switches, 128x128 MEMS Optical Switches, MxM/N MEMS Optical Switches, Optical Specifications 1 Parameter Symbol Specification Insertion Loss (IL) 1.8dB max. Return Loss (RL) 50dB min. Polarization Dependence Loss (PDL) 0.15dB max. Wavelength Dependence Loss 2 (WDL) 0.3dB max. Repeatability 3 0.03dB max. Stability 4 0.02dB max. Crosstalk -50dB max. Temperature Dependence Loss Over TOP (TDL) 0.4dB max. Optical Power Handling 500mW max. Switching Time 1ms Durability 1x10 9 min. Fiber Type SM 9/125um Jacket 0.9mm Tight Buffer Pigtail Length 1.0m min. Control Method I2C, TTL, RS-232 Note: 1. Unless otherwise notice, all parameters measured at 1550nm and 23 w/o connectors.

MEMS 16x16 Matrix Switch is an integrated switch module based on MEMS 1x16 Optical Switch components. Thirty-two MEMS 1x16 switches, sixteen for inputs and the other sixteen for outputs, are interconnected to form a fully non-blocking, two stage, optical cross-connect. Under this matrix switch platform, different MEMS 1xN switches can be used to form customized MxN Switch Matrices. Pin Assignmentsï¼? The MEMS 1xN Switch operates through a 16-pin interface. Pin assignments are listed in the following table. The relative position of each pin is presented in Figure 1. Table 3, Pin Assignment Table for MEMS 16x16 Matrix Switch with RS232 Interface â?  16 pins for MEMS 16x16 matrix with RS232 interface 1x1 MEMS Optical Switches, 1x2 MEMS Optical Switches, 1x3 MEMS Optical Switches, 1x4 MEMS Optical Switches, 1x6 MEMS Optical Switches, 1x8 MEMS Optical Switches, 1x10 MEMS Optical Switches, 1x12 MEMS Optical Switches, 1x16 MEMS Optical Switches, 1x24 MEMS Optical Switches, 1x32 MEMS Optical Switches, 1x64 MEMS Optical Switches, 1Xn~128 MEMS Optical Switches, 2x2 MEMS Optical Switches, 2x4 MEMS Optical Switches, 2x8 MEMS Optical Switches, MxN MEMS Optical Switches, 4x4 MEMS Optical Switches, 6x6 MEMS Optical Switches, 8x8 MEMS Optical Switches, 10x10 MEMS Optical Switches, 12x12 MEMS Optical Switches, 13x13 MEMS Optical Switches, 16x16 MEMS Optical Switches, 24x24 MEMS Optical Switches, 32x32MEMS Optical Switches, 64x64 MEMS Optical Switches, 128x128 MEMS Optical Switches, MxM/N MEMS Optical Switches,

1x1 MEMS Optical Switches, 1x2 MEMS Optical Switches, 1x3 MEMS Optical Switches, 1x4 MEMS Optical Switches, 1x6 MEMS Optical Switches, 1x8 MEMS Optical Switches, 1x10 MEMS Optical Switches, 1x12 MEMS Optical Switches, 1x16 MEMS Optical Switches, 1x24 MEMS Optical Switches, 1x32 MEMS Optical Switches, 1x64 MEMS Optical Switches, 1Xn~128 MEMS Optical Switches, 2x2 MEMS Optical Switches, 2x4 MEMS Optical Switches, 2x8 MEMS Optical Switches, MxN MEMS Optical Switches, 4x4 MEMS Optical Switches, 6x6 MEMS Optical Switches, 8x8 MEMS Optical Switches, 10x10 MEMS Optical Switches, 12x12 MEMS Optical Switches, 13x13 MEMS Optical Switches, 16x16 MEMS Optical Switches, 24x24 MEMS Optical Switches, 32x32MEMS Optical Switches, 64x64 MEMS Optical Switches, 128x128 MEMS Optical Switches, MxM/N MEMS Optical Switches, MEMS 16x16 Matrix Switch is an integrated switch module based on MEMS 1x16 Optical Switch components. Thirty-two MEMS 1x16 switches, sixteen for inputs and the other sixteen for outputs, are interconnected to form a fully non-blocking, two stage, optical cross-connect. Under this matrix switch platform, different MEMS 1xN switches can be used to form customized MxN Switch Matrices.

XH-OSW-1X32 optical switch is an optical path control device, which has the function of controlling the optical path and converting the optical path. It plays an important role in optical communication applications. Optical switches are mainly used in multi-channel optical monitoring in optical transmission systems, automatic switching of LAN multi-light sources/detectors, and optical sensing multi-point dynamic monitoring systems in optical testing systems for optical fibers, optical devices, networks and field engineering. Optical cable testing ; Optical device adjustment. Features: Low insertion loss, wide wavelength range Low channel crosstalk, high stability, high reliability Unique technology, no glue in the optical path Selectable locking and non-locking control types Parameter Parameter parameter values model XH-OSW-1X32 Insertion Loss 16

PM 1X1 Fiber Optical Switch 1X1 PM Fiber Optical Switch PM 1X1 Switch PM 1X2 Optical Switch 1X2 PM Optical Switch PM 1X2 Fiber Optical Switch 1X2 PM Switch PM 1X4 Switch 1X4 Mechanical PM FiberOptic Switch 1X4 PM Switch pm1x8 Switch 1X8 PM Switch PM 1X8 Fiberoptic Switch PM 1X16 Switch PM 1X32 Fiber Optical Switch 1X32 PM Fiber Optical Switch PM 1X32 Switch Polarization Maintaining Fiber 1X16 1x32 1x64 Optical Switch Applications: Instrumentation Optical Signal Routing Network Test Systems Features: Epoxy-Free Optical Path High Extinction Ratio Low Insertion Loss High Channel Isolation Highly Stability and Reliability Specifications: Parameter 1x16 1X32 1x64 PM Optical Switch Operating Wavelength (nm) 1310±30, 1550±30 Insertion Loss (dB) Typ:0.6 Max:1.0 Wavelength Dependent Loss (dB) 0.25 Polarization Dep endant Loss (dB) 0.05 Temperature Dependant Loss (dB) 0.25 Extinction Ratio (dB) >18 (typ.20) Channel Cross Talk (dB) >70 Repeatability (dB) ±0.02 Return Loss (dB) > 55 Switching Speed (ms)

1X4 Optical Swich 1x4 Mechanical Fiberoptic Switch 1x4 Fiber Optical Switch 1X8 Optical Swich 1x8 Mechanical Fiberoptic Switch 1X8 Fiber Optical Switch 1X16 Optical Swich 1x16 Mechanical Fiberoptic Switch 1X16Fiber Optical Switch 1X24 Optical Swich 1x24 Mechanical Fiberoptic Switch 1X24 Fiber Optical Switch 1X32 Optical Swich 1x32 Mechanical Fiberoptic Switch 1X32 Fiber Optical Switch 1X64 Optical Swich 1x64 Mechanical Fiberoptic Switch 1X64 Fiber Optical Switch 4X4 Optical Switch 4X4 Mechanical Fiberoptic Switch 4X4 Fiber Optic Switch 8X8 Optical Switch 8X8 Mechanical Fiberoptic Switch 8X8 Fiber Optic Switch 16X16 Optical Switch 16x16 Mechanical Fiberoptic Switch 16x16 Fiber Optic Switch 32x32 Optical Switch 32X32 Mechanical Fiberoptic Switch 32X32 Fiber Optic Switch 64X64 Optical Switch 64X64 Mechanical Fiberoptic Switch 64X64 Fiber Optic Switch 1x1 MEMS Optical Switches, 1x2 MEMS Optical Switches, 1x3 MEMS Optical Switches, 1x4 MEMS Optical Switches, 1x6 MEMS Optical Switches, 1x8 MEMS Optical Switches, 1x10 MEMS Optical Switches, 1x12 MEMS Optical Switches, 1x16 MEMS Optical Switches, 1x24 MEMS Optical Switches, 1x32 MEMS Optical Switches, 1x64 MEMS Optical Switches, 1Xn~128 MEMS Optical Switches, 2x2 MEMS Optical Switches, 2x4 MEMS Optical Switches, 2x8 MEMS Optical Switches, MxN MEMS Optical Switches, 4x4 MEMS Optical Switches, 6x6 MEMS Optical Switches, 8x8 MEMS Optical Switches, 10x10 MEMS Optical Switches, 12x12 MEMS Optical Switches, 13x13 MEMS Optical Switches, 16x16 MEMS Optical Switches, 24x24 MEMS Optical Switches, 32x32MEMS Optical Switches, 64x64 MEMS Optical Switches, 128x128 MEMS Optical Switches, MxM/N MEMS Optical Switches,

Marble & granite,stones & slates,power cord, wires & cables , cable assemblies ,optical fiber cables , coaxial cables, tyre scrap , heat exchangers , steel tire wire scrap, firewoods.

Optical switch have a wide range of applications in fiber communication systems, and their implementation technologies are diverse, including: mechanical optical switch, thermo-optic switch, acousto-optic switch, electro-optic switch, magneto-optical switch, and MEMS optical switch, etc. The MEMS optical switch is a high-tech product based on MEMS(Micro-Electro-Mechanical System) technology. It has the characteristics of small size, low power consumption, and good expandability. It is widely used in optical network scenarios such as ROADM, iODF and fiber sensing etc.

The MM Series VOA is based on a proprietary micro-electro-mechanical mechanism featuring compact design, simple construction, easy direct drive, and excellent optical performance. The MM series VOA is compliant with the Telcordia 1209 and 1221 reliability standards. The MM series VOA is available in either normally-open or normally-closed configurations and with an integrated tap option. The VOA is driven by applying an electrical voltage. â??VOA MEMS optical switch Features â?¢ Compact â?¢ Low Cost â?¢ High Reliability â?¢ Low IL, PDL, WDL & TDL â?¢ Low Power Consumption â??VOA MEMS optical switch Application â?¢ Power Control â?¢ Power Regulate â?¢ Channel Balance â?¢ Instrumentation â??VOA MEMS optical switch Performance MM VOA Unit Typical Wavelength nm 1310±50 / 1480±50 / 1550±50 Insertion Loss1 dB 0.8 Attenuation Range 30 Polarization Dependent Loss @10dB 0.15 @20dB 0.25 Wavelength Dependent Loss @10dB 0.20 @20dB 0.40 Temperature Dependent Loss @10dB 0.40 @20dB 0.80 Polarization Mode Dispersion ps 0.05 Return Loss 45 Response Time ms 5 Device Resistance ohm 100 Power Consumption3 mw 130 Optical Power Handling mw 500 Operating Temperature â?? -5~75 Storage Temperature â?? -40~85 Package Dimension mm See drawing below

The MEMS Latch Series 1x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 1x4 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 1x4 MEMS optical switch Applications â?¢ Channel Blocking â?¢ System Monitoring â?¢ Instrumentation â?? 1x4 MEMS optical switch Performance ParametersMSW-1Ã?4 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:0.7 ,Max:1.2 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤500 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching Dimensionmm(L)26Ã?(W)22Ã?(H)9.4(±0.2)

MEMS OSW is based on micro-electro-mechanical system (MEMS) technology, which achieved low insertion loss and highly repeatability by rotating the mirror of MEMS chip. MEMS OSW is mainly used in optical cross and connection (OXC) system, optical add/drop system, measure instrument system and optical signal monitoring system. The products are Telcordia GR-1073-CORE qualified, and RoHS ompliant. 1x16 MEMS optical switch Features â?¢ High Reliability â?¢ Intrinsic tolerance to ESD 1x16 MEMS optical switch Applications â?¢ Channel Blocking â?¢ Configurable Add/Drop â?¢ System Monitoring â?¢ Instrumentation â??1x16 MEMS optical switch Performance ParametersUnitValue Wavelengthnm1310/1550 Insertion LossWithout connectordBâ?¤1.0 Return LossdBâ?¥50 RepeatabilitydBâ?¤0.1 CrosstalkdBâ?¥50 Polarization Dependence LossdBâ?¤0.15 Wavelength Dependence LossdBâ?¤0.3 Temperature Dependence LossdBâ?¤0.3 Switch Timemsâ?¤30 Durabilitycycleâ?¥1x109 Maximum optical PowermWâ?¤500 Switch ModeNon-Latching Power VoltageV5 Power ConsumptionmWâ?¤500 Operation Temperature°C-5~70 Storage Temperature°C-40~85 Dimensionmm(L)68x (W)30x(H)13

The MEMS Latch Series 2x2 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 2x2 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 2x2 MEMS optical switch Applications â?¢ Channel Blocking â?¢ System Monitoring â?¢ Instrumentation â??2x2 MEMS optical switch Performance ParametersMSW-2Ã?2 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:0.8 ,Max:1.2 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤500 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching

The MEMS Latch Series 4x4 Fiber optic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed. This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost. 4X4 MEMS optical switch Features â?¢High Reliability â?¢Latching â?¢Intrinsic tolerance to ESD 4X4 MEMS optical switch Applications â?¢Channel Blocking â?¢Configurable Add/Drop â?¢System Monitoring â?¢Instrumentation â?? 4X4 MEMS optical switch Performance ParametersMSW-4Ã?4 Wavelength Rangenm1260ï½?1620 Testing Wavelengthnm1310/1490/1550/1625/1650 Insertion LossdBTyp:1.2,Max:2.0 Return LossdBâ?¥50 CrosstalkdBâ?¥50 PDLdBâ?¤0.10 WDLdBâ?¤0.25 TDLdBâ?¤0.20 RepeatabilitydBâ?¤Â±0.05 Repeatability RateHz20 LifetimeCycleâ?¥109 Switch Timemsâ?¤5 Transmission PowermWâ?¤300 Operation Temperatureâ??-5ï½?+70 Storage Temperatureâ??-40ï½?+85 Switching typeLatching Dimensionmm(L)38Ã?(W)38Ã?(H)7.5

Parameter Symbol Specification Insertion Loss (IL) 1.8dB max. Return Loss (RL) 50dB min. Polarization Dependence Loss (PDL) 0.15dB max. Wavelength Dependence Loss 2 (WDL) 0.3dB max. Repeatability 3 0.03dB max. Stability 4 0.02dB max. Crosstalk -50dB max. Temperature Dependence Loss Over TOP (TDL) 0.4dB max. Optical Power Handling 500mW max. Switching Time 1ms Durability 1x10 9 min. Fiber Type SM 9/125um Jacket 0.9mm Tight Buffer Pigtail Length 1.0m min. Control Method I2C, TTL, RS-232 Note: 1. Unless otherwise notice, all parameters measured at 1550nm and 23 w/o conne

Optical Specifications :1 Parameter Symbol Specification Operation Wavelength Range (λOP) 1550± 20nm &1625nm ± 20nm Insertion Loss 2 (IL) 1.7dB max. Return Loss 2 (RL) 50dB min. Polarization Dependence Loss (PDL) 0.15dB max. Wavelength Dependence Loss 3 (WDL) 0.2dB max. Repeatability 4 (Î?ILREP) +/- 0.02dB max. Stability 5 (Î?ILSTA) +/- 0.02dB max. Channel Cross-talk (ISO) -50dB max. Temperature Dependence Loss Over TOP (TDL) 0.3dB max. Optical Power Handling 500mW max. Switching Time 15ms max. Durability 1x109 min. Fiber Type SM 9/125um Jacket 0.9mm Tight Buffer Pigtail Length 1m +/- 0.05m Connectors FC/APC Control Method I2C, LVTTL, RS-232

FAST FIBER OPTIC 2x2 MEMS SWITCH The 2x2 MEMS SWITCH are opto-mechanical latching switches for the most demanding applications in fiber optic communication networks. The switch is available in 1x1, 2x1 and 2x2 variants and offers solid state reliability, accurate precision and fast response time. The switch mechanism is latching and has a very fast response time below 1 ms and only 0.5 dB insertion loss. In the SLTS variant the switch comes with a built in position monitor to sense the state of the switch. The miniature package withstands rugged environments and is well suited for direct mounting on printed circuit boards. The switch is qualified according to Telcordia GR 1221. FEATURES reliable 0.5 dB insertion loss 0.5 ms response time low PDL 60 dB crosstalk miniature size latching 2x2, 2x1, 1x1 variants APPLICATIONS Protection Switching Reconfiguration WDM TECHNICAL SPECIFICATIONS Unit Min Typ Max Wavelength Range nm 1240 1640 Insertion Loss dB 0.5 0.9 Crosstalk dB 75 50 Back reflection dB 55 50 Polarization Dependent Loss dB 0.03 0.07 Switching Time ms 0.3 1 Switching Voltage V 5 Fiber Pigtail mm 9/125/900 Durability cycles No wear out Power Consumption mW 10 50 Operation Temperature °C 0 70 Storage Temperature °C -40 85 Size (L x W x H) mm 43 x 16.5 x 9.5

The 4x4 switch is a very fast opto-mechanical switch working over the spectrum from 1250 nm to 1650nm. The component is designed for optical switching in fiber optical instruments and networks. The highly reliable switching mechanism uses integrated micro mirrors and features fast switching time below 1 ms and below 2.0 dB insertion loss. The miniature package withstands rugged environments and is well suited for direct mounting on printed circuit boards. The switch is built by cascading 1x2 and 2x2submodules which are qualified according to Telcordia GR 1221. FEATURES reliable 2.0 dB insertion loss 1 ms response time non-latching APPLICATIONS Source Selection Protection Switching Monitoring Wavelength provisioning DESCRIPTION The 4X4 switches are composed of an optical subsystem and an electrical driver interface. The optical switching function is realized by silicon MEMS chips, on which a mirror can be moved in and out of the optical path by electrostatic actuation. The 4x4 switching function is realized by interconnecting 1x2 and 2x2 switch elements. In the latching SL variant a bistable suspension mechanism keeps the last selected state in power off. In the non-latching SW variant the switch elements return into the bar state when electrical power is removed. TECHNICAL SPECIFICATIONS Switch Unit Min Typ Max Wavelength Range nm 1250 1650 Insertion Loss dB 1.0 2.0 Crosstalk dB 65 55 Backreflection dB 55 50 Polarisation Dependent Loss dB 0.07 0.15 Switching Time ms 0.5 1 Fiber Pigtail μμ 9/125/900 Durability cycles no wear out Package Power Consumption during switching mW 75 200 Supply voltage V 4.75 5.25 V Logic level low V 0 0.5 Logic level high V 2.5 5.25 Operation Temperature °C 0 70 Storage Temperature °C -40 85 Size (L x W x H) mm 100x 100 x 8