Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Decorative stainless steel hard weave crimped mesh
Material: Stainles steel wire
Woven type: Lock crimp woven
Wire: Single wire crimp, single + double wire crimp
Hole size: as per customers' design
Application: for architecture outside wall, decoration.
Type
MAISHI could make hard weave crimped mesh with various materials:
>> stainless steel wire --- Not get rust, and could keep the original color for years.
>> Stainless steel wire + copper wire --- Make a special decoration when the copper is oxidized.
Copper wire
>> Other materials as per your request --- MAISHI could make various hole shape and sizes to meet your creative design.
We assure the correct material, exact sizes as per your drawing.
pplication
MAISHI manufacture hard weave crimped mesh for various decoration purpose.
Like architecture or building outwall decorations
Designs for special shapes
Chairs, curtains
Screen wall
Or others as per your design
We could also accept customized desgin. Just let us know your design and drawing, we will make the mesh for you!
7773 0 6Mm Stainless Steel Hard Braided Crimping Mesh Suppliers
Short on time? Let 0 6Mm Stainless Steel Hard Braided Crimping Mesh sellers contact you.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.
It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.
Due to addition of stabilizing element titanium, it has good mechanical properties of welding.
Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.
430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.
430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:
Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Product Specification and Steel Grade
ASTM
JIS AISI EN Mill\'s Standard
S30100
SUS301
301
1.4310
S44500
SUS430J1L
- -
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445
Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Tolerance of Width
W < 100 mm
100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm
�?�??�?�?�?�± 0.10 mm
Polished 304 Stainless Pipe is a standard stainless pipe that has been polished to a 180 Grit Brushed Finish on its exterior for cosmetic and ornamental applications. Unlike the dull mill finish of standard stainless pipe, this polished stainless steel pipe allows your projects to have a more finished look with excellent corrosion resistance making it ideal for handrails, architectural design, restaurant and store fixtures, trade show displays, marine components and more. Just like standard stainless pipe it has an interior weld seam.
High hardness stainless steel bee hive tool/beekeeping tool/mini beehive tool
Basic Information
Place of Origin:
china
Brand Name:
super-sweet
Certification:
ISO
Model Number:
hivetools
Minimum Order Quantity:
100
Packaging Details:
standard carton package
Delivery Time:
5 WORKING DAYS
Payment Terms:
Western Union, MoneyGram, T/T
Supply Ability:
100000PCS
Stick ice lollipop ice filling sealing machine
The automatic stick ice filling -sealing machine for lollipop ice is small in size and light in weight, and is made of stainless steel. This machine can produce various beverages such as lollipop ice, milk sticks, fruit milk, fruit cold drinks, and so on. from small capacity to big capacity .
Product parameters of one :
Voltage: 220/50 (V/Hz)
Power: 0.75KW
Sealing speed: 2000 cups/hour
Filling capacity 0-150ml
Specification: 960 * 430 * 330mm
(Welcome give thumbs-up, comment,transmit)
welcome order !
1. The fruit and vegetable grader is suitable for grading all kinds of round and oval fruits and vegetables. The conveyor belt has a small fruit drop, and the grading process will not cause secondary damage to the fruit
2. All parts in contact with the fruit are thickened and soft wrapped, and the grading process will not damage the fruit. The grading size can be adjusted at will
3. It is made of stainless steel, with high hardness and no deformation, and the equipment is solid and durable. At the same time, it is equipped with a large fruit tray (you can choose to load on one side of the machine or on the top of the machine), which can pick out bad fruits. One machine can be used for many purposes.
4. The number and size of grading can be adjusted at will.
Adjustable Fruit vegetable sorting machine grader machine
Can be use for rond shape fruit /vegetable grader/sorting machine ,can customized .
1. The fruit and vegetable grader is suitable for grading all kinds of round and oval fruits and vegetables. The conveyor belt has a small fruit drop, and the grading process will not cause secondary damage to the fruit
2. All parts in contact with the fruit are thickened and soft wrapped, and the grading process will not damage the fruit. The grading size can be adjusted at will
3. It is made of stainless steel, with high hardness and no deformation, and the equipment is solid and durable. At the same time, it is equipped with a large fruit tray (you can choose to load on one side of the machine or on the top of the machine), which can pick out bad fruits. One machine can be used for many purposes.
4. The number and size of grading can be adjusted at will.
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other.
Max size :3300*12000mm
Main character :
Energy saving , improving the thermal performance
Sound insulated
Security and comfort
Component :
1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application
2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material .
Weather strips of automotive Devulcanization
and extruding machine with stainless 80 wire mesh and remove smell of Sulfur
Packing is 1,250kg/pallet
Hardness A type 63~65 /Tensile Strength 75~80kgf/sq cm / Elongation rate 200% / Specific Gravity 1.29
