Air sterilization Air sterilization equipment Bio-oxygen air sterilizers are installed in the mixing plenum of a central air handling units where they continually clean, disinfect and deodorise the supply air as the air flows through the central air handling unit. Individually packed.
Air purifiers Bio-oxygen air purifiers are installed inside the mixing plenum of an air handling unit where they continually clean, disinfect and deodorise the supply air and the air flows through the mixing plenum. Individually packed
Air purification equipment Bio-oxygen air purifiers are designed to be installed inside central air handling units to clean, disinfect and deodorise the supply air as the air flows through the central air handling unit.
Outdoor and indoor air purifier, indoor sterilizer, street light air purifier.International business consulting, asia marketing consulting
Odour control equpment, air sterilization & air purification equipment.
Silicone hose, garrett turbo, fuel pumps, dsrturbo, silicone joiners, air filters, alloy bends, arp bolts, camshafts, engine, exhaust, gaskets, ingition coils, rb20det chip, silicon, speedflow fittings, speedflow braided hose, wastegates, tb42-td42-y60 manifold, turbo exhaust housing, trademe store, fuel regulators, K&N, tomei, walbro, bosch, id injectors, turbochargers, n1 oil pump.
T shirts, jewellery rings necklaces, bracelets bulk jewellery sets, auto parts oil filters, air filters, fuel filters, auto bolts, nuts, car globes, hair colours and products, toilet paper, facial tissues bulk.
Filter Element, Oil Purifier Machine ,Replacement Filter Elements, Coalescence & Separation Filter Elements ,Industrial Factory Filter Elements , Stainless Steel Filter Elements .
Instructions for use 01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
Nitrile Gloves, Latex Gloves, Face masks, PPE, Air Sterilisation Systems, Fine Particle Reduction Systems.
Airborne virus sterilizer, street light air purifer, formaldehyde purifier, indoor and outdoor air purifier.Manufacturer
01. The hydraulic filter element is used in the hydraulic system to filter out particles and rubber impurities in the system to ensure the cleanliness of the hydraulic system. When refueling, the hydraulic oil must be filtered, and the refueling tools should be clean and reliable. The filter at the filler port of the hydraulic oil tank cannot be removed in order to increase the fueling speed. Fueling personnel should use clean gloves and work clothes. 02. Ensure that the hydraulic oil is not used at high temperatures; the oil will quickly oxidize and deteriorate at high temperatures; the air filter on the hydraulic station should use a filter that can filter both particles and moisture; it is sold on the market; 03. The cleaning oil of the hydraulic system must use the same brand of hydraulic oil as the system used, and the oil temperature is between 45~80â??. Use a large flow to remove the impurities in the system as much as possible. The hydraulic system should be cleaned more than three times repeatedly, and all of it will be discharged out of the system when the oil is hot after each cleaning. After cleaning, clean the filter again, and add new oil after replacing the new filter element. Supplementary note: The filter element is originally a consumable product, and it needs to be replaced immediately after it is usually blocked. Pay attention to the system oil tank and pipelines to be flushed clean. When refueling, pass through a refueling device with a filter. Do not let the oil in the tank directly contact the air. Do not mix new and old oils. It is helpful to extend the service life of the filter element.
Cars, body chassis and engine parts, automobile spare parts, genuine spare parts for cars and trucks like spark plugs, engine oils, lubricants, seal and gasket kits, timing belts, fuel injectors, suspension bushings, shock absorbers, brake pads, headlamps, fuel and water pumps, air and oil filters, engine and gearbox mounts, tensioner assemblies, crankshaft and wheel bearings, stabilizer links, thermostats, ignition coils, oxygen sensors, radiator grilles, windshields, hydraulic fluid, engine repair kits, control units..
Complete kit with faucet and fittings. Two filters, sediment and carbon. 25 kilos.
Spices, cardamom, pepper, fruits, coconut, coffee products, edible copra, coco cube, charcoal for shisha, natural cocoa powder of different varieties, sorghum, sugar.We are a reputed distributor of items listed and we can also arrange transportation and shipping based on mutual discussion regarding the items.
Manufacturer Henan UTERS Industrial Technology Co.,Ltd Brands UTERS / Negotiable Filter Type Hydraulic Oil Filter Element Size Data Please contact our sales manager if you need to confirm parameters. End caps Material Galvanized Carbon Steel; Stainless Steel; Nylon Plastic; Aluminum Machining And Other Standard Materials Frame Material Galvanized Carbon steel punching frame; stainless steel punching frame, etc. Filter Material 304 Stainless Steel Mesh; Glass Fiber; Oil Filter Paper And Other Standard Materials Filter Accuracy 1~100um; filtration ratio: Xâ?§100. Collapse Pres. 21bar~210bar Filter Media Conventional Hydraulic Oil, Lubricating Oil, Fuel, Etc. Operating T. -30â??~+100â?? Structure Strength 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa. Position On the suction line, pressure oil line, return line, bypass, and separate filter system. Application Steel, Electric Power, Metallurgy, Shipbuilding, Aviation, Papermaking, Chemicals, Machine Tools And Construction Machinery, Construction Machinery And Other Fields. Packing Plastic bag inside,paper box outside / Negotiable Transportation DHL, UPS, FEDEX, SF And Other International Express, By Air, By Sea, Or Special Line Services. Production Time 10 Work Days After Payment / Negotiable Warranty 12 months/ 365 days after shipment. Testing Standard ISO 2941 Filter element-Test method for filter element rupture resistance ISO 2942 Filter Element-Test Method for Structural Integrity of Hydraulic Filter Element ISO 2943 Filter Element-Test Method for Compatibility of Hydraulic Filter Element Material and Liquid ISO 3723 filter element-end-to-end compliance test ISO 3724 filter element-determination of fatigue characteristics ISO 3968 Filter Element-Differential Pressure Flow Characteristics ISO 4572 Filter Element-Multiple Pass Method for Determining Filtration Characteristics
On-Counter Single Filter
Double under counter Filter
Filter Housing 10-2.5
Filter Housing 10-4.5
