ating line is delivered by Finnish Elmont Oy and it consist of 59 separate dipping tanks, 6 material handling cranes and related process and automation equipment. We have the dipping tanks and material handling cranes in our store for sale. Dipping tank materials are AISI 316, SS, PP, HST and PP. All tanks are 2200 mm long and 1250 mm height, widths varies from 450 to 1740 mm, volumes from 1213 to 4016 liters. All tanks are in good condition.
The cranes are designed for those tanks and we have 6 pcs of them. Cranes have 0.25 kW gear motors and control panels. Structure is made of steel and they are in good condition.
If you are looking for such equipment, please contact us and we are pleased to give you more deep information.
Chromium plating, phosphating, oxidation, nickel plating, cadmium plating, passivation, silvering, plating, galvanizing, etching, coating of parts from ferrous and non-ferrous metals and alloys.
For order or information contact us
Epoxy Polyester
Powder paint, made of oven-cured epoxy and polyester resins; designed for interior applications, excellent yellowing resistance and overall properties.
General Specifications: Available in all colours
One coat application,
Less waste and pollutionFields of Use
Office furnitures, domestic appliances, Heating systems, Lighting system(s), Rack system(s), electrical panels/switchboards, etc.Product Properties
UV-Proof series is not recommended for outdoor use. It contains epoxy resin which chalkifies when exposed to the air.
Good diffusion properties, Surface Glossy GL Semi-glossy HR Semi matt CS Ragged
Copper Wire Scrap
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper ETP Content 999
Cu 999
Element0005
Copper9999 Min
Lead0005 Max
Bismuth05 Max
Total impurities03 Max
Copper No 2 kinds of alloy Wire cooper without lines containing impurity contain Copper quantity for 96 minimum content 94
Shall not contain excessive lead and tin change of copper wire welding of copper brass and bronze line excessive oil prohibition and nonmetalcrisp burning line utterly margin of fine copper and excessive sexual yarn Need appropriate means to remove dirt Birch
Shall consist of clean untinned uncoated unalloyed
copper wire and cable not smaller than No 16 B S
wire gauge free of burnt wire which is brittle
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
16626 Metal Coatings Suppliers
Short on time? Let Metal Coatings sellers contact you.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Discover our airtight metal boxes, featuring exclusive designs that blend art and practicality. Perfect for storing food items like nuts, cookies, or any small articles, keeping them fresh thanks to their airtight seal
- Made from durable metal
- Unique and vibrant designs
- Airtight seal for maximum protection
Products Used Radiator scarp
Copper Content 99.9%
Material
Copper/Aluminum
Dimensions 914mm x 914mm x 12mm
Core dimension
360x688x32mm
Inlet 35mm
Outlet 35mm
Grade AA
- Temper : 'O' 1/2 H
- Tensile Strength : 340 Min-400 Min
- Elongation % on 50 mm G.L : 40 Min
- Vickers Hardness VPN : 80 Max/95 Min-120 Min
- Cu -: 58% - 60%
- Pb -: 1.5% - 2.5%
- Imp -: 0.3% (Max.)
I would like to introduce our company to POWLAND POWDER COATING , which is ISO 14001 9001 certified. Our company specializes in manufacturing high temperature dye and competitive prices
We provide all the colors they need, light, heavy, shiny and wrinkled
company's policy
We are interested in providing benefits, quality, customer satisfaction and the necessary standards in safety issues for cadres and workers in the sectors that provide services, so that you enjoy our work that aims to reach the level of the most important companies in Turkey and participate constantly in developing the economic aspect of the country. We take into account all changes and productivity in the advanced business world, mobility, quality, original ideas, and expected perspectives, taking into account through long-term cooperation and action, and our vision is to make our company a leading and pioneering enterprise in the dyeing sector. Our mission is to focus on customers, define market requirements and needs, develop marketing strategies and create new maps and to be dynamic, and that everyone is respected, stable and strong, and that they are an honest, caring and trustworthy institution, and not to assign and compensate for the quality of services and facilities in any way. Our values are customer focus, complete trust, honesty, tolerance, continuous development, and quality leadership.
We have great interest in working with you, and we strive to obtain a prompt response from you in order to arrange a visit and submit our offers. Thank you.
