NEO ENAMEL Paints are based on the alkyds/drying oils which have hard films with gloss retention. The films show excellent brushing properties and very little tendency to yellowing on exposure to the environment. Products are carefully designed keeping the pigment volume concentration to get optimum gloss, washability, adhesion and durability. The product dries at room temperature by oxidation and polymerization. NeoSyntheic Enamels are used on various substrates like wood , metal furnitures, train coaches, automobiles industries etc. NEO ENAMEL products are available in 2 varieties : I GLOW Hi Gloss Enamel. X 2 General Purpose Enamel.
PRODUCT INFORMATION PRODUCT NAMEâ?¡ Sequoia 3000 Gloss Finish DESCRIPTION Sequoia 3000 Gloss Finish is a premium solvent based high gloss finish, it is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. USAGE For decoration and protection. Suitable for all types of interior and exterior metal and wood surfaces BENEFITS High gloss and excellent gloss retention Excellent gloss fastness Excellent durability Washable PACK SIZE 1 litre, 5 litres COLOUR RANGE Refer to Sequoia 3000 Gloss Finish colour chart PERFORMANCE GUIDE CHEMICAL RESISTANCE Resistant to mild chemical fumes. Special paint systems required if surface is subject to constant chemical attack HEAT RESISTANCE Generally resistant to heat up to 0c. Discolouration will occur after a prolong time if surface is constantly heated WATER RESISTANCE Resistant to normal atmospheric humidity present. Will withstand repeated washing. Not suitable for surface immerse in water THEORETICAL COVERAGE 16-18 meter2 /liter. Note: Surface coverage will alter depending on condition of surface to be paint PRE-APPLICATION SURFACE PREPERATION Generally all surfaces to be coated must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. For optimal performance, new galvanized surface should be cleaned and degreased to ensure good adhesion PREVIOUSLY PAINTED SURFACEâ?¡All loose and flaking paint film must be removed. Surface must be free of dust, dirt, grease and other contaminants. If metal surface is contaminated with rust, sand the surface with sand paper or wire-brush and clean of dust. RECOMMENDED PAINT SYSTEM Types of Surface Undercoat (1 coat) Finish (2 coats) Wood REDWOOD white undercoat Metal SEQUOIA PROTECTIVE COATING OR NASA oxide SEQUOIA 3000 GLOSS PAINT PAINT APPLICATION THINNINGâ?¡ For normal use, thinning is not required. If required, add 1 part of white spirit (10%) to 10 part of paint. Note: Excessive thinning will affect the quality of the paint. DRYTIME Touch dry : 2 hours Hard dry/Recoat : 8 hours CLEAN UP â?¡Clean all equipment with white spirit immediately afteruse. Allow empty container to dry prior to disposal. PRODUCT DATA COMPOSITION â?¡Pigments: Lightfast organic pigment, lightfast inorganic pigment. Blinder : Organic Alkyd Solvent : White spirit
Product Description Nolifrit Ground Coat Porcelain Enamel Frit Features: 1, With very good adhesion, can dissolve much iron oxide in metal surface, makes very strong combination with metal body. 2, Can be combined with cover coat in high level. 3, With very good elasticity and compressive strength. Prevent and decrease damage due to mechanical stress. 4, With less viscosity and surface tension, its good for escape of gas when firing. Reduce bubbles on cover coat. To ensure the smooth surface of enamel products. 5, With suitable expansion coefficient similar as steel plate. ABOUT US vitreous enamel coating porcelain enamel steel grates enamel glaze fritHunan Noli Enamel Co., Ltd is the leader manufacturer of enamel frits & inorganic pigment in China. Now we have 30,000 M/T enamel frits and 2,000 M/T inorganic pigments annual capacity, 10,000 M/T RTU(Ready to use) powder and electro static powder. Our main products of enamel frits including ground coat, cover coat, transparent frit , matt enamel, direct on black frits and various cast-iron frits. High temperature inorganic pigment including Red& yellow, blue, green, black Oxide etc, widely used in porcelain enamel, ceramics, glass, coating,painting etc. As an ISO9001:2008 certified manufacturer, we have strict quality control in the whole production process to guarantee the quality of products. We are supplying the best service for customer. 100% of Our goods are exporting to USA, Europe, Middle East, Southeast Asia, South America, & Africa. FAQ Q1. Are you factory or trading company ? We are a factory. Q2. Whats the MOQ ? Inorganic pigment MOQ is 25kg, enamel frit, RTU powder and electronic static powder MOQ=200kg. Q3. What is your principle for the samples ? We offer free samples if you are willing to pay the shipping cost. Q5. How about your delivery time? A: Generally, it will take 15 days after receiving your advance payment. Q6. What information should I let you know if I want to get a quotation? A: Your base material, your application area (best to send your finished product picture), the physical parameters you require(acid resistance, adherence, color, etc) the quantity you need. If possible, you can send me your samples and we customize for you. Q7.Why choose us? 1. Reaching a production capacity of 30,000 Tons/Year for Enamel frit, 10,000 Tons/Year for RTU & electronic static powder, 2,000 Tons/Year for Inorganic pigment. 2. 60% frits & pigment exported to US, Netherlands, Indonesia,Thiland, Vietanam, Korea, Chile etc 30 country. 3. Having over 30 technical experts of frits & pigment from domestic & overseas, focusing on technical development & product improvement. 4. Having complete quality control system, Strong technical supporting team is focusing on customer service in this world.
we are one of the professional automotive refinish manufacture for aftermarket, we are a premium manufacturer of clear coats,primers,reducers,1k,2k acrylic metallic topcoat toners,pearls,silvers with complete line of advanced technology paint system to professional all over the world, Over the years,we have dedicated ourselves to producing high performance coatings to a variety of customers including :1, warehouse distributors,2,automotive jobber distributors,
1. Excellent weather resistance 2. Excellent antirust performance, good flexibility and film 3. Fast dry, good adhesion, eco-friendly
HI - Performance Syn. Enamel Paint Superior Durability Color Pigment System Easy To Apply By Brush , Roller And Spray PRODUCT PARAMETERS 1. Type : Single Pack 2. Composite : Modified Oil Based Resin with Finest Bright Pigments, Hydrocarbon solvent and addives 3. Use Recommended Thinner to make Applicaon Viscosity 4. Applicaon Tools : Brushing, Spraying or Roller 5. Flash off = 30 Minutes 6. Drying Time : Surface Dry : 4 Hours Hard Dry : Overnight 7. Curing Time : 72 hours 8. Over coang Interval : MIN : Overnight MAX : 5 Days 9. Color : Assorted Shades . Finish : 10 Smooth Finish 11 Thinner / Cleaner KISOMIN THINNER 12. Shelf Life: Up to 12 Months as long as the sealed containers are kept under cover in a dry place under normal temperature. SCOPE USES Kisomin durable synthec enamel are long lasng & solvent based paint used for wide range of surface. Recommended as a decorave finish coat & can be applied on surfaces like Metal, Cement Brickwork, Asbestos Grills and Wooden surfaces like doors, Windows, Cabinets & wide range of furniture FEATURES/ BENEFITS * Smooth durable finish. * Smooth flow & easy to apply. * Excellent coverage & hiding. * Superior surface protecon. KEY ATTRIBUTES * Applicaon temperatures : 10-44 degc PERFORMANCE PROPERTY Chemical Resistance A Exposures Splash & Mild Fumes/Outdoor Spillage Resistance cid + + Alkalis + + Solvent NA NA Salt ++ ++ Water +++ +++ Flexibility +++ Adhesion +++ Excellent : +++ Very Good : ++ Good : + SURFACE PREPARATION APPLICATION BRUSH CONVENTIONAL SPRAY NOTES : HEALTH & SAFETY Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign parcles. System of Coang should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before applicaon of paint, thin down to achieve desired viscosity & filter through white cloth. Apply Kisomin Paint to finish. Sr the base thoroughly and then mix to uniform consistency. Apply without thinning Add Kisomin thinner to adjust viscosity depending on spray condion. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm�². 1. Use off the mixed paint . 2. Do not apply when temperature falls below 10 C or rises above 50�°c and when relave humidity rises above 90%. Do not apply during rain, fog or mist 3. Brushes and spray equipment should be cleaned with Thinner, 4. Special care to be taken to close immediately the partly used Diluted Material. Please refer to the separate Material Safety Data Sheet available with detailed information
Metal Paint (oil-gloss-enamel)
SAFFRO'S aura Premium Gloss Enamel gives smooth,hard & glossy finish.Its dry film has good adhesion to the surface.It has very good flow and brushability. aura Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily RECOMMENDED USE It is applied on furnitures,drums,barrels,household products,elecrical motors,doors,windows and variety of other surfaces which are not subjected to outdoor exposure FINISH :smooth and glossy COLOR As per shade card Including White and Black. COVERING CAPACITY :7 to 9 sq.mt/lit/coat at 30 to 35 micron dry film thickness,depending (ON SMOOTH MILD STEEL SURFACE) upon shades and surface. DRYING TIME :Surface dry - Less than 3 hours. :Hard dry - Less than 15 hours. Second coat application period -After 10 hours Above all properties depend upon temperature and humidity. FLASH POINT :Above 30* C (86 *F) THINNER RECOMMENDED :SAFFRO Synthetic G.P Thinner METHOD OF APPLICATION :By Brush or spray at a pressure of 40 to 50 P.S.I RECOMMENDED PRIMER :For Metal - SAFFRO R/O Z/C metal primer - SAFFRO Zinc Chrome primer yellow For Wood - SAFFRO Wood primer white For Plaster - SAFFRO Cement primer (oil base) DIRECTION FOR USE Remove dust,grease,oil,moisture,rust and other loose flakes etc.After priming the surface with recommenden primer with over night drying & sanding with emery paper,apply SAFFRO SHINE synthetic enamel using recommended thinner.Allow first coat to dry for minimum 10 hours before applying second coat.Stir the content thoroughly prior to use PACKING : 20 Ltr, 10 Ltr,4 Ltr ,1 Ltr, 500 ml,200 ml,100 ml,50 ml.
Hand painted enamelware items.Manufacturers and exporters
Enamel Paints .
Wire enamel-insulating varnish.
Synthetic enamel oil paint.
Soft Enamel Pins..
Synthetic enamel paint.
Melamine glossy , sanding sealer, nitro cellulose paint , synthetic enamel paints.
Ceramic paint , epoxy paints, polyurethane paints, silicone paint , special synthetic enamel paints.Manufacturer
Enamels paints, paints.
Enamel top coats, under coats, emulsion, stucco, p.V.A. Primer, epoxy top coat, epoxy under coat, wash primer, thinners. 5 usg or 18.9 ltr.
Synthetic enamel, p u enamel, stipple finish, hammer tone paint, furniture enamel, auto finish, mettalic paints, pigment dispersion, colourant, pigments.
Enamels paints, paints.
