Crutches Suppliers and Manufacturers

- Made of aluminium pipes. - Height adjustable without tools. - Comfortable rubber cushioning and hand grip. - High quality rubber shoe for firm ground grip and better life. - Inside rubber shoe iron ring used to avoid damage to rubber shoe on continuous usage. Applications - Adjustable Crutches with models to cover youth, adult and tall adults ranges. - Each pair comes fully assembled, ready to use. - The reverse 180 degree cove forms a channel to hold the leg extension in proper supportive alignment.

Item Code 14.01.048 Specification 1. Made of Aluminium pipes. 2. Height adjustable without tools. 3. Comfortable rubber cushioning and hand grip. 4. High quality rubber shoe for firm ground grip and better life. 5. Inside rubber shoe iron ring used to avoid damage to rubber shoe on continuous usage. Applications 1.Adjustable Crutches with models to cover youth, adult and tall adults ranges. 2. Each pair comes fully assembled, ready to use. 3. The reverse 180 degree cove forms a channel to hold the leg extension in proper supportive alignment Sizes Small, Medium, Large, Extra Large

#7031(L) 33-42", #7032(M):28-37", #7033(S):21.5-30.5, Forearm section:5 level height adjustments, strong lock nut in both forearm section and leg part. Material: 1" aluminum tube.

7021(l) length: 52-61" 7022(m) length 44-52" 7023(s) length 38-46" Hand rip has 5 level height adjustments Foot has 9 level height adjustments 7/8" aluminum anodize With comfortable pu foam underarm pad.

Item Code 14.01.046 Specification 1. Made of high gloss anodized aluminium. 2. Double adjustment for leg and cuff. 3. Double pin adjustment for added strength. 4. High quality rubber shoe for firm ground grip and better life. Applications 1.Adjustable Crutches with models to cover youth, adult and tall adults ranges. 2. Each pair comes fully assembled, ready to use. 3. The reverse 180 degree cove forms a channel to hold the leg extension in proper supportive alignment. Sizes Universal with adjustable length.

- Made of high gloss anodized aluminium. - Double adjustment for leg and cuff. - Double pin adjustment for added strength. - High quality rubber shoe for firm ground grip and better life. Applications - Adjustable Crutches with models to cover youth, adult and tall adults ranges. - Each pair comes fully assembled, ready to use. - The reverse 180 degree cove forms a channel to hold the leg extension in proper supportive alignment.

Properties Rehabilitation Therapy Supplies Type Cane Brand Name Bother Place of Origin Zhejiang, China (Mainland) Model Number XD-8085 color silver,black,golden,brown and so on Forearm crutch CE ,FDA ,ISO certified Light-weight & robust construction Anti-slip PAD test rubber tip Single adjustable Elbow crutch. ABS plastic handle , non-slip rubber tip, aluminum alloy tube. Comfortable, contoured, hand grips provide long wear. Leg and forearm sections adjust independently for a custom fit. All telescoping parts are manufactured with internal bushings and external lock nuts to provide silent usage. Recommended for long-term disability. Adjustable length:96-114cm Carton size:92*38*25cm G.W:11KG Double adjustable crutches Height:85-115.5mm G.W:16 kg/cn 20pcs/cn. 20pcs/package box,1pcs/pvc bag, package box can designed according to your order.

Item No:XD-8103 Hight:The adjustable Length: from 114cm-134cm Material of handle: ABS plastic handle or rubber handle 9 gears for height adjustment MOQ:500pcs Bottom non-slip rubber sheath ,passed PAHS and ROHS testing Loading capacity: 150kg Packing :PVC bag then in carton Unite Price: FOB Ningbo USD FDA&SGS&CE certificated Large Axilla Crutch: Item No:XD-8107 Hight:The adjustable Length: from 134cm-154cm Material of handle: ABS plastic handle or rubber handle 9 gears for height adjustment MOQ:500pcs Bottom non-slip rubber sheath ,passed PAHS and ROHS testing Loading capacity: 150kg Packing :PVC bag then in carton Unite Price: FOB Ningbo USD FDA&SGS&CE certificated Small Axilla Crutch: Item No:XD-8102 Hight:The adjustable Length: from 94cm-114cm Material of handle: ABS plastic handle or rubber handle 9 gears for height adjustment MOQ:500pcs Bottom non-slip rubber sheath ,passed PAHS and ROHS testing Loading capacity: 150kg Packing :PVC bag then in carton Unite Price:FOB Mingo USD FDA&SGS&CE certificated. 20pcs/package box,1pcs/pvc bag,package box can designed according to your order.

Neck traction fixer 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g. 5) Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6) The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C

Neck traction fixer 1)Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2)The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3)The traction power can reach 80kg. 4)The net weight of the Necktraction Fixer is 250g. 5)Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6)The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets.

Neck traction fixer The character of the neck traction fixer: 1)our product is the class i device, has got 3 exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. 2)the necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the necktraction fixer can adjust from 28cm to 48cm. 3)the traction power can reach 80kg. 4)the net weight of the necktraction fixer is 250g. 5)inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6)the person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing Daxiang New Material and Technology Co.

Neck traction fixer Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g.

Dear Sir or Madam: I am a manufacturer of the Neck Traction Fixer in China, now I am looking for the distributor to distribute Air Neck Traction in foreign market. Neck traction Fixer is a new type health care product, which can elongates and exercises the neck, decreases the pressure, assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: 1) Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. 2) The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. 3) The traction power can reach 80kg. 4) The net weight of the Necktraction Fixer is 250g. 5) Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. 6) The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given.

Neck traction fixer The character of the neck traction fixer: Our product is the class i device, has got 3 exclusive patents (invention patent, new practical patent and shape patent) and is fda certified product. The necktraction fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the necktraction fixer can adjust from 28cm to 48cm. The traction power can reach 80kg. The net weight of the necktraction fixer is 250g. Inner of the necktraction fixer is made from the rubber latex; the outside of the necktraction fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms.

We are an credible Exporter and Supplier of Frozen Beef Meat / lamb meat / Mutton Meat. Procured from the reliable sources, our Frozen Beef Meat/ lamb meat is acclaimed for its freshness, premium quality and long shelf life. Frozen Beef Meat/ lamb meat is packed under controlled conditions using food grade packaging material to preserve its freshness for long. We are equipped with a fleet of refrigerated trucks and chillers for safe transportation of Frozen Beef Meat / lamb meat. Our name also features among the reliable Frozen Halal Beef Meat Suppliers. We stock a variety of Frozen Beef Parts which can be procured as per the requirements of the customers. We are a prominent name among Frozen Beef Meat Exporters owing to our focus on timely delivery and optimum quality.

Neck traction fixer.

Neck traction fixer.

Handle: T-Handle Joint Number: 3 Stick Tip: Rubber Tip Product Name: Folding Elbow Crutches Material: Aluminum Alloy Color: Silver Function: Health Care Size: Adult Medium Weight: 550g Weight Capacity: 300LBS Usage: Disabled People

Crutches.