ETHICON HARMONIC FOCUS SHEARS HAR9F
Basic, low-cost model or model with patented safety system. 10 to 32 mm metal straps
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Guilotine shear Piesok nta 3150/6.3, 1985 Piesok cnta 3150/16 , 1988 Piesok cnta 3150/25, 1989 Jelsingrad mg 31.16-20, 1988 Johan kuntz rottary cutter 1420/10, 1991
Hardwares, industrial supplies, home & office furniture, cutting tools like manual operated reinforcement steel bar cutters, manual operated sheet metal shears, pruning shears.
Hydraulic drawing presses, hydraulic press brakes, guillotine shears, eccentric presses, punch hole presses, fin presses.
Laser cutting machines, plasma cutting machines, punch presses, high speed press brakes, press brakes, swing beam shears, iron workers.
New and used recycling machinery and equipment - balers, shears, baler shears, metals recycling machinery, shredders, granulators.
Features: Nominal thickness 6/8mm Cut Length 3050mm Distance between housing 3200mm Gap 300mm. Weight 8000kg.
Features: Cut Length 2000mm Nominal thickness 8mm Gap 500mm Back motorized rear register Hydraulic blank holder Lighting of cutting line. Weight : 5000kg.
Cut in 1 kg or to your specifications
CNC Guillotine Shear 3000 mm cutting lengt Programmable CNC control Unit ( Cybelec ) 750 mm motorised back gauge safety guards Cutting Line Illumination CE conformation Automatic Blade gap adjustment Automatic rake adjustment
Ethicon is a well-known medical device company, and Harmonic devices are commonly used in surgical procedures for cutting and coagulating tissue. Harmonic devices use ultrasonic technology to provide precise and controlled cutting and hemostasis during surgery. Here are some general features that you might find in a Harmonic device, such as the ETHICON HARMONIC FOCUS SHEARS: Ultrasonic Technology: Harmonic devices use ultrasonic vibrations to cut and coagulate tissue simultaneously. Focused Energy: The "Focus" in the name may indicate a focus on delivering energy precisely to the target tissue. Handpiece: Ethicon Harmonic devices typically consist of a handpiece that the surgeon operates during the procedure. Blade Design: The shears are likely to have a specific blade design optimized for cutting efficiency. Application: Harmonic devices are often used in various surgical specialties, including general surgery, gynecology, and urology.
NG Hydraulic Shear is suitable for various operations, including breaking the steel structure, scrap steel processing and other applications, cut iron material, steel, tank and tube etc, unique design and innovative ways to ensure the efficient operation and powerful cutting force. Quick Couplers Buckets for Excavator Buckets for Loader Buckets for Quarry and Mining Special Equipment Demolition equipment Recycling equipment Buckets for excavator and loader Forestry equipment
Product Code Product Description PRS-ZE0000-02 Direct Shear Test Machine ( Digital ) STANDARDS : TS 1900-2,ASTM D3080,BS 1377-7,AASHTO T236,NF P094 071-1/2 The System is capable of performing the consolidation and shearing phases of a standard direct shear and residual shear test under full automatic control. The system consists of a computer-controlled unit that utilizes micro-stepper motors to apply the vertical and horizontal loads to the soil specimen. The system is capable of doing a consolidation process at 32 phase automatically. Horizontal shearing can be applied at a specified rate of deformation or at a specified rate of horizontal force change, or at a specified set of force steps of a specified duration. The system is capable of displaying the current status of a test and graphically portraying the progress of the test in real time. The system includes the capability for the operator to alter the test process and conditions at any stage of the test. Technical Specifications Capacities 2.5 Kn, 5 Kn or 10 Kn Vertical Engine Stepper engine with built-in controls for vertical load Horizontal Engine stepper motor with built-in controls for horizontal load Speed Range 0.00003 to 15 mm per min. Horizantal Travel +125 mm Vertical Travel 12.5 mm Power supply 220-240 V 1 ph 50 Hz 750 W Dimensions: 228 x 560 x 762 mm
Cranck shears with inclined throat. Suitable to work in high/low temperature environment. Drilling rig, centering skids.Manufacture, repair all types of metal working equipment
Elgo P40T Control Unit or Cybelec Cybtouch 8 - Touchscreen CE-Norm Motorized blade gap adjustment Variable cutting length Rake angle adjustment Table with iron balls Rubber Pads for hold down pistons Ball screw back gauge 1000 mm 1 mt. Flip up finger guards with flexi glass 1 Squaring arm L= 1500 mm, with scale & T-Slot & Tilting stop 2 Support arms L=1000 mm, with T-Slot & Tilting stop 3 Support arms L=1000 mm, with T-Slot & Tilting stop Illumination & Shadow wire Top blades 2 side & Bottom blades with 4 side
Cutter, syringe, strips, needles, thermometer, cannula, glucometer, harmonic focus shears, ace circulation, adhesive mini wrap, blades, blood collection tube, blood pressure monitor, nutella, onion, dried apricot, bioderma, sensibio.
Professional hair shears, standard barber scissors, standard thinning scissors, plastic handle barber scissors, pet grooming scissors & shears, hair razors & hair shapers, cuticle nippers, nail nippers, manicure & pedicure kits.
Hydro-machines as drawbenches, straightening machines, pointing machines, chamfering machines, cutting machines as fly saw, shears, hydraulic presses, rolling mill.
