Moves like a real cobra. When sensing the object, the cobra eyes will be lit up. Retractable tongue. Tail swings. Continuously play for 1 minute the cobra will go into sleep mode. Tap on the cobra head, it will wake up and re-enter to play mode. Battery info: 1x3.7V150MAH lithium for cobra (built-in) USB Charging cable. Charging time: 30mins Play time: up to 60 mins Cobra size: 40x4x3.5CM Color available: red Age grade: 3+
Wired magnetic door sensors..
Application: Siren and alarms is widely used in fire fighting, car, office, residential building and security equipment etc Specifications: Dc resistance: 19 ohm +/- 10% Impedance: 100 ohm +/- 25% at 1khz Frequency range: 2000hz +/- 20% S.P.L: >= 90db at 10cm 2000hz 9vp-p square wave >= 95db at 30cm 1000hz 12vp-p square wave Export standard carton
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
Professional; improving; cooperation; win-win: these are our philosophy. We believe quality is the life of company and honesty is the basic rule of market. We will try our best to offer satisfying service. And welcome your cooperation. All size you want
Cylindrical close to switch Lj series 1 Lj series 2 Pr series E2e series Close to switch models and meaning
Optical, Ultrasonic, Conductive, Fibre, Float, Inductive, Magnetic, Capacitive, Laser, Loop Detectors, HMD, Light Curtain, Sensor Inductive Sensor / Capacitive Sensor Proximity Sensor, Photoelectric Sensor, Level Sensor, Ultrasonic Sensor, Wind Sensor, Motion Sensor, Magnetic and Light Curtains, etc
PCFS-IR2125A level sensor contact type, it is used for tube. The principle is infrared, output signal is analog. When there is no water, the sensor outputs low voltage value; When there is water, the sensor outputs a high voltage signal. The size can be customized. The photoelectric liquid level switch has high precision, low price, high reliability and wide application environment, it is less affected by strong acid, alkali and viscosity. Photoelectric level sensors can be used for higher liquid level accuracy requirements.
Product line as below : Piezoelectric vibration acceleration sensor High impact acceleration sensor General acceleration sensor High sensitivity,low magnitude accelerometer Micro piezoelectric accelerometer Industrial type accelerometer, temperature sensor composite The special function of the acceleration sensor (standard, high temperature, water) Capacitive accelerometer (zero frequency) Piezoelectric vibration speed sensor Non-contact vibration displacement sensor Dynamic force sensor and impedance head Quartz dynamic force sensor Impedance head (force + acceleration) Pressure sensor Piezoelectric type pressure transducer Piezoresistive pressure transmitter Signal Conditioner
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
Turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Lux: turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Manufacturer: Texas Instruments IC DRIVER 4/0 16SOIC Applications: - Chemical and Gas Sensors - Field Transmitters: Temperature Sensors and Pressure Sensors - Military: Radars and Sonars - Motor Control: Brushless DC and Brushed DC - Military and Avionics Imaging - Temperature Sensors and Controllers Using Modbus
OUTPUT : 4-20 MA SUPPLY : 24 VDC TYPE :2 WIRE PRESSURE TRANSMITTER CAPSULE TYPE PROTECTION CLASS : IP 65 PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT FIXED RANGE CAPSULE TYPE
Rapid Test Detecting Beta-lactams, Sulfonamides And Tetracyclines In Milk 3sensor is a rapid assay in strips format detecting the contamination of milk samples by Beta-lactams, Tetracyclines and Sulfonamides molecules. Benefits - Only 7 minutes to results - User friendly - High sensitivity - Cost-effective - Test 3 in 1 - Save milk, save time, save energy - Rapid One Step Assay - No extra device or equipment needed - 12 months long term storage, 2-8, no freezing
Prices Mentioned above is for base model only
Oxygen sensor Oxygen sensor is a kind of metallurgy detection probe which is designed to measure the oxygen content and temperature of the molten steel fast, accurately and directly. 1. Application: used for primary melting furnace, lf and rh furnaces and so on, oxygen probes measure oxygen activity of the molten steel and the oxygen activity of the molten steel in the treating process, which can guarantee the deoxidizer addition, shorten the refining time, help to develop new varieties, improve technology, and promote steel purity. 2. Main features and range of application: Oxygen sensor has three types: 1)oxygen sensor for high ppm 2)oxygen sensor for low ppm . 3)oxygen sensor for ultra-low ppm.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.