Natural raw materials: extracts of medicinal plants. company was founded in 2018. the main extraction workshop was launched in march 2022. the workshop has 4 extractors of 6000 liters each. also in the drying area, spray drying equipment is installed, which allows you to obtain up to 1 ton of dry extract. the enterprise was built in accordance with gmp requirements and has an fssc 22000 certificate. our products: pomegranate peel extract grape seed extract (polyphenol (40 70%) artemisia absinthium l (wormwood) extract origanum vulgare l extract inula helenium (elecampane) extract.
Stainless steel water tank SUS316,SUS304 can be choosen depending on the water quality and usage environment ,stainless steel boards are shaped by hydraulic press mold, the standard specification is 1000x1000mm or 1000 x 500mm, they are welded on site by arc-argon welding machine,the welding surface is washed and passivated by acid to ensure the welding parts will not get rusted. Factory use unique stainless steel plate and the high difficulty ramming formation craft to achieve the high strength requirenments with the smallest material consumption. The weight only be third of the ordinaly panel. 1.The raw materaial plate was anlysised by our material anlysier to assure the quality 2.The welding is argon arc weld(TIG) to avoid plate's oxidized 3.After welding the the inner tank ,we will make a full water pressure test to check the welding joint .After welding the jacket ,the full water pressure test be done for jacket too 4.After finishing the surface finish ,our people will make a surface roughness testing to assure the Ra data . 5.After agitator installment ,we will operate it to assure the function is good . 6.The nozzle's position 's confirm also is checked by our quality control people .
SMC (Sheet Moulding Compound) water tanks are made of a composite material consisting of thermosetting resin, glass fibers, and mineral fillers. The material is molded into panels and then assembled to form a water tank of the desired size and shape. SMC water tanks are durable, lightweight, and resistant to corrosion, making them ideal for outdoor and indoor applications, such as residential, commercial, and industrial water storage. GRP (Glass Reinforced Plastic) water tanks are also made of composite material, but they use a different manufacturing process. GRP tanks are made of layers of fiberglass reinforced with resin and formed into a seamless, one-piece vessel. Like SMC tanks, GRP tanks are lightweight and durable, and they are also resistant to corrosion and UV radiation. They are commonly used for industrial applications, as well as for residential and commercial water storage. GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness.
GRP Water Tank/SMC Water Tank/FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank combined with the GRPmolding panel, sealing materials, metal structure and piping system to onsite assemble together. Cleanliness and saniation SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented. In particular, when large panels are employed, existing water tank interior structures are eliminated, allowing long-term sanitary use of water tanks. Excellent durability The interior structural components of a water tank consist of Storage Tank System (STS) and Base Layer (STS PE coating and Winding Pipes) that prevent corrosion or rusting. The external components are Melt Zinc plated, thus having semi-permanent useful life. Complete water tightness Special sealants with international patents are used to guarantee water tightness. Rational capacity design Various panel designs are used to design tanks of all capacities and dimensions. Convenient installation Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation. Excellent thermal protection Single panels are used for water tanks installed underground, while the insulated panels, which are single panel with insulation material compressed together, provide excellent insulation on water tanks installed outdoors.
According to IEC60695-2-2, IEC60695-11-5 and GB/T-5169.5, ZY-3/ZY-3S needle flame test equipment is applied in the production and quality control department of lighting products, hyperpiesia electrical apparatus, domestic appliance, machine electric appliance, electrical machine, power tool, electronic instrument, electrician instrument and technical equipment. Also, the apparatus is suitable for the industry of insulation material, engineering plastics and solid combustible material. Specifications: Angle of burner: 45 (when in test) / (when adjust the flame's height) Needle flame burning time: 0~999.9s±0.1s (adjustable, 30s in general) â?¢ After-flame time: 0~999.9s�±0.1s, auto record and pause manually â?¢ Height of flame: 12mm�±1mm (gauge is included) â?¢ Gas: 95% butane â?¢ Test range of temperature: 0~1000â?? â?¢ The temperature rises from 100â??�±2â?? to 700â??�±3â?? within 23.5 seconds�±1s â?¢ Thermocouple: �¦0.5mm K type â?¢ Applied with touch screen and remote control To save the delivery cost for the oversea market, LISUN designed a compact version needle flame test equipment weighing less than 50kg. (Customer need to prepare additional ventilation system for ZY-3S)
The ZRS-3H Glow-wire Test Apparatus is according to IEC60695-2-1, IEC60695-2-10, IEC60695-2-11, IEC60695-2-12, IEC60695-2-13 (GB/T5169.10, GBT5169.11, GBT5169.12, GB/T5169.13) < Basic testing methods of Glow wire, basic testing methods of Glow wire device>, UL 746A, IEC829, DIN695 and VDE0471. What is glow wire test? The Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. It uses high-temperature coating spraying on steel structure and imported instrument display, with easy operation and stable performance. The glow wire testing equipment is applicable to flame resistance test of all levels of QC departments and corresponding enterprises. Specifications: Heating temperature: adjustable continuously within the range of 25~1100C, the accuracy of temperature is 1C, the resolution of temperature is ±3C Glow-wire time: 0.1-999.9s±0.1s(time range is adjustable) Ignition time: 0.1-999.9s, auto record, manual pause Flame-out time: 0.1-999.9s (auto record and manual pause) Glow wire pressure on test specimen: 1±0.2N. Limiting pressure depth is 7mm Glow wire: 4 nickel (80) and chromium (20) Made in specific dimensions. Thermocouple: �?0.5 armored nickel & chromium/nickel-chromium wire, K Type. Automatic departure: While reaching specified glowing time, test specimen will depart from glow wire automatically. To save the delivery cost for the oversea market, LISUN designed a compact version glow-wire tester weighing less than 50kg. (Customer need to prepare additional ventilation system for ZRS-3HS)
The SG61000-5 is an automatic surge generator (also called lightning surge immunity test, combination wave generator, surge current generator/surge voltage generator, combined surge voltage and current generator) . How does a surge generator work? The SG61000-5 surge generator provides a common basis for evaluating the resistance of power cords and internal connectors of different equipment to high energy transient interference caused by natural lightning surge induction and large capacity load switching. It fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards.
LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer â?? Flicker Tester is equipped with Class A photo detector, so the sampling speed is up to 100kHz. It fully meets the requirement of BASIC, Energy Star V2.1, IEC TR 61547-1:2020 IEC-Pst, CA CEC, ASSIST, CIE TN006-2016 CIE SVM, IEEE Std 1789 standards, etc. It is professional for flicker test of LED lights and lamps, energy-saving lamps, etc. According to EU directives 1194/2012, 2009/125 / EC, SASO2902, COMMISSION DELEGATED REGULATION (EU) 2019/2015, COMMISSION REGULATION (EU) 2019/2020 and IEC60969 â??Self-ballasted Lamps for General Lighting Servicesâ??Performance Requirementsâ?? and other requirements. The LSRF-3 can connects with PC via USB cable. The English version software can be run in Win7, Win8 and Win10, Win11 (The driver was Certificated by Microsoft)
LPCE-2 Integrating Sphere Spectroradiometer LED Testing System is for single LEDs and LED lighting products light measurement. LEDâ??s quality should be tested by checking its photometric, colorimetric and electrical parameters. According to CIE 177, CIE84, CIE-13.3, IES LM-79-19, Optical-Engineering-49-3-033602, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IESNA LM-63-2, IES-LM-80 and ANSI-C78.377, it recommends to using an array spectroradiometer with an integrating sphere to test SSL products. The LPCE-2 system is applied with LMS-9000C High Precision CCD Spectroradiometer or LMS-9500C Scientific Grade CCD Spectroradiometer, and a-molding integrating sphere with holder base. This sphere is more round and the test result is more accruate than the traditional integrating sphere. Measures: â?¢ Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI, CQS, TM-30 (Rf, Rg), Spectrum Test â?¢ Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, WPE, EQE, EEI, Energy Efficiency Class, Pupil Flux, Pupil Flux Efficiency, Pupil Factor, Cirtopic Flux, Plant Growth Lamp PAR and PPF â?¢ Electrical: Voltage, Current, Power, Power Factor, Displacement Factor, Harmonic(Optional) â?¢ LED Light Aging Test according to LM-80: Flux VS time, CCT VS time, CRI VS time, Power VS time, Power Factor VS time, Current VS time and Flux Efficiency VS time. Option: The LPCE-2(LMS-9000C) or LPCE-2(LMS-9500C) work with a IS-1.5MT Constant Temperature Integrating Sphere and TMP-8 Multiplex Temperature Tester can fully meet IES LM-82 High Precision LPCE-2(LMS-9000C) System Configuration (It is suitable for the Middle & Small Manufacturer or General Test Lab): High Precision CCD Spectroradiometer (LMS-9000C), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2050B/LS2050C/LS2012), DC Power Source (DC Series), AC Power Source (LSP-500VARC or LSP-500VARC-Pst), Integrating Sphere (IS-1.5MA and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W), 19 Inch Cabinet (CASE-19IN). You can download the detailed PDF here: LPCE-2 (LMS-9000C) High Precision CCD Spectroradiometer Integrating Sphere System Brochure±0.3nm, Wavelength Reproducibility: ±0.1nm Sample Scanning Steps: ±0.1nm Accuracy of Chromaticity Coordinate (x, y): ±0.002 (under Standard A Lamp) Correlated Color Temperature CCT: 1,500K~100,000K, CCT Accuracy: ±0.3% Color Rendering Index Range: 0~100.0, Accuracy: ±(0.3%rd±0.3) Luminous Flux Range: 0.01-200,000lm; Photometric linear Accuracy: ±0.5% Stray light:
LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires photometric, colorimetric and electrical measurement. The measured data meets the requirements of CIE 177, CIE84, CIE-13.3, COMMISSION DELEGATED REGULATION (EU) 2019/2015, IES LM-79-19, Optical-Engineering-49-3-033602, IESNA LM-63-2, ANSI-C78.377 and GB standards The Sphere System Configuration: CCD Spectroradiometer (LMS-7000), Optical Fiber (CFO-1.5M), Digital Power Meter (LS2008R), DC Power Source (DC-S Series), AC Power Source (LSP-500VAS), Integrating Sphere (IS-1.5MA-CASE and IS-0.3M), Standard Light Source (SLS-50W and SLS-10W) Measurement: Colorimetric: Chromaticity coordinates, CCT, Color Ratio, Peak Wavelength, Half Bandwidth, Dominant Wavelength, Color Purity, CRI (Ra, R1 to R15), Spectrum Test, TM30 (Rf, Rg), CQS Photometric: Luminous Flux, Luminous Efficiency, Radiant Power, EEI, PAR, PPF Electrical: Voltage, Current, Power, Power Factor, Harmonic (Optional) Specification: Spectral Range Wavelength: 350nm~950nm(LMS-7000VIS) (200~1050nm is optional) Spectral Wavelength Accuracy: ±0.5nm Wavelength Reproducibility: ±0.5nm Sample Scanning Steps: �±0.1nm Accuracy of Chromaticity Coordinate (IOx, y):±0.003 (under Standard A Lamp) â?¢ Correlated Color Temperature CCT: 1,500K~25,000K. CCT Accuracy: ±0.5% Color Rendering Index Range: 0~100.0, Accuracy: ± (0.3%rd±0.3) Photometric linear: �±0.5% Stray light:
The Portable CCD LED Colorimeter Spectroradiometer has the following versions which can measure different parameters
What is the definition of type C goniophotometer? LSG-6000 Moving Detector Goniophotometer (Mirror Type C) was manufactured by LISUN completely meets LM-79-19, IES LM-80-08, COMMISSION DELEGATED REGULATION (EU) 2019/2015, CIE-121, CIE S025, SASO 2902, IS16106 and EN13032-1 clause 6.1.1.3 type 4 requirements. LSG-6000 is the latest upgraded product of LSG-5000 and LSG-3000 in compliance with the requirements of the LM-79-19 standard Clause 7.3.1, its an automatic light distribution intensity 3D curve testing system for measuring light. The darkroom can be designed according to the customerâ??s existing room size. What is the use of goniophotometer? LSG-6000 gonio photometer manufacturer is LISUN, it can measure all types of lighting sources, LED, Plant Lighting or HID luminaires such as indoor and outdoor luminaires, roadway luminaires, street lamps, flood lights and other kinds of luminaires.
1997 Heidelberg SM 52-2 P Max.Size: 52 x 37 cm (20 x 14 inch) Current State: In stock Colors: 2 Impress.Count: 43 mio HD SM 52 2P Two colour press Preset, Alcolor Autoplate, Minus version Royse Refrigeration & Re-circulation, Ink, Blanket & Impression Cylinder wash, CPtronic controlled, Media print powder spray,
Heidelberg SM 52- 4 2001 Year : 2001 - Imp. Count : 67 mio imp. 4 colors Offset Press of size 37 x 52 cm equipped with: Low Pile Delivery - AUTOPLATE - PRESET (automatic size setting) - CP 2000 - ALCOLOR dampening - Technotrans Refrigeration - ALL Automatic washers (blanket, rollers and impression cylinders) - Grafix Alphatronic 200 powder spray - Speed 15.000 sheet/hour - antistatic device
Heidelberg SM 52-5 5 colour straight press Year: 2003 Classic Center (Remote register & colour control) CP Tronic 86 million impressions Low pile delivery Autoplate Alcolor dampening Technotrans Alpha refrigeration Auto roller wash Auto blanket wash Auto cylinder wash Grafix Alphatronic spray device Suction-tape feeder Available immediately
2001 Heidelberg SM 52 4 Type: SM 52 4 Size Max.Size: Format in cm : 36 x 52 Year: 2001 Colours:4 Impression: 38 Million 2 Feeder Boards Stream Feeder Suction Feed Board Electronic Sidelays Classic Center CPC 1-04 CP Tronic Alcolor Technotrans Alpha D Chiller Automatic Washups Medi print T Tech Powder spray Autoplate 2 Delivery trolleys Manuals & Tools
2002 HEIDELBERG SM102-2P 2 Circa 118 Million Impressions Equipped With:- 13,000 SPH CP2000 Alcolor Autoplate Preset De-ionised air blast at feeder Eltex antistatic in delivery Electronic sidelays Heidelberg Hydrostar - Technotrans beta D (water cooled) including chilling unit Alcosmart AZR AZTO Graph - pumping station Programmable roll/bla/imp. cyl. wash via CP2000 Weko T77 powder spray Eltex anti static in delivery Steel plate in feed and delivery
Place of Origin Hebei, China Model Number -Adss Name -ADSS fitting/Short Span Tangential Suspension Clamp for ADSS Cable Color -Black And Silver Packaging Details -Pallet or Wooden Case Standard or Nonstandard -Nonstandard Product name -Cable clamp Material -Steel Packing -50 pcs /bag Surface Finishing -HDG Spraying Polishing OEM -Weclome
Redispersible polymer powder is free flowing white or light yellow powder obtained through the spray-drying of aqueous emulsions, which is suitable for the production of various dry mortar. Redispersible Polymer Powder is re-emulsified with water and has the same properties as the original emulsion, that is a film can be formed after water evaporation. This film has high toughness, weather resistance and adhesion to a substrate. In addition, the latex powder with hydrophobic properties can improve the waterproof performance of the waterproof mortar.Water-reducing properties is mainly used for self-leveling.
Redispersible polymer powder is free flowing white or light yellow powder obtained through the spray-drying of aqueous emulsions, which is suitable for the production of various dry mortar. Redispersible Polymer Powder is re-emulsified with water and has the same properties as the original emulsion, that is a film can be formed after water evaporation. This film has high toughness, weather resistance and adhesion to a substrate. In addition, the latex powder with hydrophobic properties can improve the waterproof performance of the waterproof mortar.Water-reducing properties is mainly used for self-leveling.