USE: This machine is suitable for printing such packing materials as polyethylene,Website:http://www.xh-mach.com, polyethylene plastic bag glass paper and roll paper etc. And it is a kind of ideal printing equipment for producing paper packing bag for food, supermarket handbag, vest bag and clothes bag, etc. SUITABLE MATERIAL:Kraft paper:40-350 g/, single-sided coated paper:30-350g/, copy paper:15-350g/, firecrackers and paper:40-350g/, paper money and incense:25-350g/, silicone paper:50-350g/, coated paper:30-350g/, dust-free paper:25-350g/, Release paper:40-350g/, composite paper:30-350g/,thermal sensitive paper:30-150g/Woven:15-120g/, Weave fabric:15-500g/ ,No woven:15-150g/PVC:10-120g/, OPP:10-120g/, PE:10-120g/, PET:10-120g/, CPP:10-120g/ Main parameter:Technical SpecificationModelYTB-6800YTB-61000YTB-61200Color6 color6 color6 colorMaterial feeding width800mm1000mm1200mmMax Printing Width760mm960mm1160mmStructure typeStack typeMaterialNon-woven fabric, Paper, Film(PVC.PE.BOPP.PE), Aluminum foil,PP woven and so onThickness of plate2.28 or 1.7mm (customized by client)Printing length280-1000mm (customized by client)Printing speed100m/minTransmission drive typeSynchronous beltFeeding material part:1.Single unwinder system or double unwinder system, pneumatic loading&unloading system2.Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.3.Air shaft4.EPC (edge position control): With manually/automatically/ central return function, can adjust the rewind move left and right .5.Automatic tension control system with magnetic brake. Printing sections: 1.print material: resin plate or rubber plate2.Transmission between printing roller and anilox roller:gears3.adjustment method: By Manual (Automatic printing after adjust by manual, when start machine, no need register color again, the printing pressure and register all keep the same.)4.Printing roller lifting system: Automatic Hydraulic cylinder control roll up and down. Drying system: 1.The machine is equipped with blower and heater; and the heater employed central temperature control system2.Dry apparatus between each color, and one more dry apparatus after printing finished Rewinding Part 1.Single or double rewinder system, surface rewinding system special for paper and PP woven.2.Hydraulic loading&unloading system3.Air shaft
Characteristics:1.Adopt the anilox rollers to spread ink.2.Unwinding and rewinding controlled by magnetism power brake, clutch. (for by the automatic tension controller of Mitsubishi, made in Japan).3. Printing unit adopt 360 º to regulate for registration.4. Each printing unit has one IR drier.5. The rubber roller can break away automatically while parking, and running at a low speed, in order to avoid water being dried.6. The main motor is adopted the import stepless regulation of frequency conversion. Common MatterPrinting times2 ColorsModel typeDB-RY320DB-RY450DB-RY800Raw material width350mm480mm830mmEffective printing width320mm450mm800mmPrinting speed55-65m/min55-65m/min55-65m/minMachine speed80m/min80m/min80m/min Tension control range3-15KG/Full widthAccurancy of registration ±0.1mmGuide RollÏ?65mm Anodizing or hard chrome surface treatmentControl motorAC Vector Motor, AC Servo Motor (User Advice)Machine colorMUNCELL NO. F-299002 (User Advice) WINDERUnwinding & rewinding part1-axis type/Spare unwinder for 800mm widthOuter DiaÏ?600mmConnect raw materialManual connection( with splicing table)Air-Shaft fixing type3" ShaftHot blow injection typeIR hot air / UV strong lightHeating sourceElectric heaterHeating sourceIR: 0.8 W/Unit , UV:3.6 KW /UnitControlTemperature controller Prinitng UnitPlate typeFlexible resin plateThe thickness of plate.1.7 mm (User Advice)Thickness of glue0.38 mmCeramic roller LPI300-1000 LPIDoctor typeGeneral DoctorImpressing Rubber RolleÏ?65mm (Hardness A75 °~70 °) FAQQ: What's your delivery time?A: For this 1 color machine, we just need 15 days to finish after receiving your 30% advanced payment. Q: Terms of payment?A: On T/T term, 30% down payment is required in advance,and 70% balance shall be settled before shipment.We also accept Cash. Q: How long is your machine's warranty period?A: All our machine have one year guarantee, starting from finished installation. Q: How could we do if the parts broken within warranty?A: We would express the free replacement parts during the warranty date.
Name: electroplated diamond & CBN grinding wheel for non-ferrous industry application No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding. Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: 1.No dressing procedure necessary,Body can be re-plated several times 2.High geometric and proportion precision,Complicated forming 3.retain their original shape and dimensions throughout their working life 4.Simple electroplated process, less investment convenient manufacturing 5.Excellent surface roughness, high grinding efficiency , long tool life 6.free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1,) 5) Grit size (16/18, 18/20,40/45,80/100,325/400. In GB or ISO standard) 6) Other request
Name: electroplated diamond & CBN grinding wheel for non-ferrous industry application No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding. Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: 1.No dressing procedure necessary,Body can be re-plated several times 2.High geometric and proportion precision,Complicated forming 3.retain their original shape and dimensions throughout their working life 4.Simple electroplated process, less investment convenient manufacturing 5.Excellent surface roughness, high grinding efficiency , long tool life 6.free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1,) 5) Grit size (16/18, 18/20,40/45,80/100,325/400. In GB or ISO standard) 6) Other request
Name: electroplated diamond & CBN grinding wheel No dressing,Body can be re-plated several times Introduction:Electroplated diamond and Cubic Boron Nitride (CBN) tools are made up of a basic single layer or multi-layers (depending on application) of either diamond or CBN particles that are bonded to the tool surface using a nickel matrix. The product can be made with various shapes and they are suitable for special complicated profile, surface grinding ,Internal grinding, Slot grinding,Profile grinding and small and others form grinding.Electroplated diamond and CBN tools are used for surface grinding ,Internal grinding, Slot grinding,Profile grinding Ceramics, Glass, Tungsten Carbide, Ferrite ,Chilled Cast Iron, Founded Alloy Steel, Titanium Alloy And etc Applications of electroplated bond grinding wheels: diamond tools for non - ferrous industry application * carbide (grinding green and sintered tungsten carbide) * ceramic (grinding ceramics like SIC, AJO,ZrO, etc) * automotive (grinding brake liners and cutting re-enforced rubber mouldings) * pharmaceutical (grinding factitious knee joint) * dental (profiling rubber bonded grinding pins) * ferrite (grinding magnetic parts) * chemical (grinding laboratory glass) * graphite (grinding graphite parts) * glass (grinding tubes, automotive components) * Fiberglass ,Plastics and Electronic components, etc CBN tools for metallic materials industry application * High-speed tool steels * Die steel * Hardened carbon steels * Hardened stainless steels * Alloy steels,Titanium Alloy * Aerospace alloys * Abrasion resistant ferrous materials, etc Advantages of electroplated diamond & CBN wheels: No dressing procedure necessary,Body can be re-plated several times High geometric and proportion precision,Complicated forming retain their original shape and dimensions throughout their working life Simple electroplated process, less investment convenient manufacturing Excellent surface roughness, high grinding efficiency , long tool life free-faster cutting, no dressing, less heating due to the diamond particles protruding from the surface. Please provide us details when you order, For example, Product needed: Resin bond diamond grinding wheel 1) Diameter (25, 40,100,200,300 ,750mm) 2) Hole/state bore dimension 3) Thickness (4/5/6/8/10/ ,40/50/60mm) 4) Shape (1A1 /1A1R/1A8/1A1W/1L1/1F1/6A2/12A2/11V9/4A1/14A1 ,) 5) Grit size (16/18, 18/20 ,40/45,80/100 ,325/400. In GB or ISO standard) 6) Other request
Name: vitrified bond diamond grinding wheel for ceramic Introduction: Vitrified bond diamond grinding wheels possess pretty high abrasive resistance, especially in polishing hard and brittle workpiece. It has many advantages like small grinding force, low operating temperature, high grinding precision, excellent workpiece's surface grinding, etc. Therefore, vitrified bond diamond grinding wheel will express the better advantages in the future. It is recognized as a high performance grinding wheel with the higher speed, higher efficiency, higher precision, lower abrading cost and lower pollution. Based on these superiorities, vitrified bond diamond bruting wheel is widely used in wafer, PDC, PDC, diamond cutter, CBN, cemented carbide, new engineering structural ceramic, diamond, jewel, crystal, rare earth materials and another hard-brittle materials' machining operation. Application : Mainly used for machining tungsten carbide, ceramic, cermets, optical glass, PCD, PCBN, CVD, natural diamond, stones and so on. Features: 1. high speed, 2.high efficiency, 3.high precision, 4.low grinding cost performance. Specifications of vitrified diamond grinding wheel: Model D(mm) T (mm) H (mm) W (mm) X (mm) 6A2 150 40 32, 40 5, 10, 15, 20 10 125 40 32, 40 5, 10, 15, 20 10 100 40 20, 32, 40 3, 5, 10, 15, 20 10 Grit: 325/400, W40(500#), W28(600#), W20(800#) , W10(1500#),W5(3000#),W3(5000#) Advantages of vitrified diamond wheels for PCD and PCBN tools : * The porous structure of the abrasive improved diamond exposure and Can Prevent Vertical Streaks On Workpiece And Improve Surface Quality * Accurately control geometric tolerances to make a good abrasive layer * Good Self-Sharpening, High Grinding Efficiency,High Wear Resistance And Less Abrasive Grain Consumption * High Precision Workpiece. PCD Tools Can Reach High Efficiency , Good Surface Finish And Edge No Chipping * Vitrified Bond Wheels Offer Tool Life Greater Than 150 Times That Of A Resin Bond Wheel And Can Be Easily Trued And Dressed On The Machine Material:Diamond /CBN Size:150x20x40x40x10
REXI laminated safety glass has sandwiched structure, to put a piece of film of polyvinyl butyral as the main component between two pieces of glass. It is widely used in the construction, automotive and other industries due to its superior functions such as safety, heat preservation, noise control and UV isolation. Most of China laminated safety glass factory uses PVB film.The interlayer film is a polymer material made of polyvinyl butyral-resin and plastication extrusion by plasticizer 3GO (triethylene glycol octoate). The filmâ??s thickness is generally 0.38mm and 0.76mm, it has good adhesion for inorganic glass, with characteristics of transparent, heat preservation, moisture preservation, high mechanical strength and so on.The film produced with special formulations are also widely used in aerospace, military and high-tech industries, such as aircraft, spacecraft, military equipment, solar cells and solar receivers, etc.Laminated safety glass price is decided by the film to some extent.Security: Under the external impact, due to the absorption of the elastic role of the film layer, it can prevent the penetration of the impact. Even if broken, it only produces spider-net-like cracks, the debris are firmly adhered to the film layer, and will not shed and fall off causing harm, the broken glass can still be used until replaced.Anti-theft: It is very tough, even if the thieves crack it, the film layer will firmly adhered, maintaining the integrity so the thieves still cannot enter the room. It can be installed instead of fence, not only helps us save money, but also make a beautiful look and get rid of the feeling of prison.Sound-proof: The film has a damping effect on the sound waves, it can effectively inhibit the spread of noise, especially for buildings near airports, railway stations, downtown and side of roads, after the installation, the sound insulation effect is very obvious. Anti-UV performance: The film can absorb more than 99% of ultraviolet rays, thereby it can protect the indoor furniture, plastic products, textiles, carpets, works of art, antiquities or other stuff from color fading and aging caused by ultraviolet radiation.Energy-saving: The film can effectively reduce the solar light transmittance. And glass lamination using dark color low transmittance film has better performance at energy-saving than regular film of the same thickness. At present, China laminated safety glass manufacturers can produce product with a variety of colors.
REXI laminated safety glass has sandwiched structure, to put a piece of film of polyvinyl butyral as the main component between two pieces of glass. It is widely used in the construction, automotive and other industries due to its superior functions such as safety, heat preservation, noise control and UV isolation. Most of China laminated safety glass factory uses PVB film.The interlayer film is a polymer material made of polyvinyl butyral-resin and plastication extrusion by plasticizer 3GO (triethylene glycol octoate). The filmâ??s thickness is generally 0.38mm and 0.76mm, it has good adhesion for inorganic glass, with characteristics of transparent, heat preservation, moisture preservation, high mechanical strength and so on.The film produced with special formulations are also widely used in aerospace, military and high-tech industries, such as aircraft, spacecraft, military equipment, solar cells and solar receivers, etc.Laminated safety glass price is decided by the film to some extent.Security: Under the external impact, due to the absorption of the elastic role of the film layer, it can prevent the penetration of the impact. Even if broken, it only produces spider-net-like cracks, the debris are firmly adhered to the film layer, and will not shed and fall off causing harm, the broken glass can still be used until replaced.Anti-theft: It is very tough, even if the thieves crack it, the film layer will firmly adhered, maintaining the integrity so the thieves still cannot enter the room. It can be installed instead of fence, not only helps us save money, but also make a beautiful look and get rid of the feeling of prison.Sound-proof: The film has a damping effect on the sound waves, it can effectively inhibit the spread of noise, especially for buildings near airports, railway stations, downtown and side of roads, after the installation, the sound insulation effect is very obvious. Anti-UV performance: The film can absorb more than 99% of ultraviolet rays, thereby it can protect the indoor furniture, plastic products, textiles, carpets, works of art, antiquities or other stuff from color fading and aging caused by ultraviolet radiation.Energy-saving: The film can effectively reduce the solar light transmittance. And glass lamination using dark color low transmittance film has better performance at energy-saving than regular film of the same thickness. At present, China laminated safety glass manufacturers can produce product with a variety of colors.
hot sale Euro bamboo flooring :use high quality bamboo raw material ,use big Germany pressure machine. Use environmental-friendly teal glue to bond tightly! can use more than 50 years, we export 15 years for bamboo flooring, bamboo window and doors. Fenghe Bamboo flooring have CE FSC SGS Certificates Size:1030 140 12mm can make any length according to clients orders, length max is 9.7 meters. Package: 10 pcs in a cartons 562 cartons in a 20ft containers color is natural color or carbonized color or any painting color by orders Production time is 10-30 days Fenghe natural bamboo flooring are use high quality MOSO bamboo as raw material ,based on traditional compression techniques,we insist on making breakthrough in management and technology, and we have got 3 core advantage of our bamboo flooring: 1. solved biological antiseptic technology of bamboo, Fenghe Bamboo flooring can be used in external environment for more than 10 years,2 solved lengthening core technology of bamboo chips, the length of bamboo flooring ca n be customized 3. the structure of common bamboo flooring are remained, it is more natural ,adhesive are less than 20% than strand woven bamboo flooring, it is an ideal choice for attic balconies ,beach floors, outdoor corridors, and high class courtyard landscape architecture. Type: bamboo flooring inner room or outdoor bamboo flooring decking high quality moso bamboo flooring flooring material :100% solid bamoo Formaldehyde: E1 E0 standard Color:Carbonized color or natural color Standard Size: out door flooring 1850 140 18.5mm Application:Park square commercial park, gardon, business center Brightness or Matt can make surface Milling: G G fixed with stainless buckles Installation:Nail down method Packing details :Shrink film and carton and bamboo pallet container packing by colorful carton or white carton 6 pcs in a carton 1.562m2 /carton 560ctn in 20GP 874.72 m2 20GP 21800KG 20GP indoor bamboo flooring: 1.The flooring material is good ,density is big, pressed by imported big machine, heavy weight 2.Bamboo fiber are thick and clear,bright and strong luster 3.The bamboo sheets are tightly glued,and it is completed 4.The glue is natural resin glue, it is Eco-friendly 5.The paint is authentic Taiwan UV paint 6.Advanced color technology, more suitable for market demand,make up for the lack of a single color Germany ,Italy and Taiwan professional production equipment, good process.
1.Material:Steel tube. 2.Standard:ASTM\DIN\BS\JIS\GB. 3.Surface finish:electrophoresis. 4.Weight: 0.5-5kg. Fujian Fengli Machinery Technology Co., Ltd. is a professional casting, machining, complete sets of equipment manufacturing enterprises,in 2008 the company was recognized as the national high-tech enterprises, has won 23 national patents, is a pioneer in the field of science and technology innovation in China. The total area of comepnay is 105148 square meters, and divided into two areas (Fengli Longzhou Industrial Park, Fengli Yanshi Industrial Park). Fengli foundry(founded in 1988) has Danish disa horizontal moulding line, resin sand production line and shot blasting machinee, annealing furnace, medium frequency furnace, spectrum analyzer, furnace rapid analyzer, carbon silicon instrument, universal testing machine, metallographic analysis, hardness tester and other types of production and processing and testing equipment, with annual production of various brands of gray cast iron, ductile iron, wear-resistant alloy steel, non-ferrous metal casting ability more than 10000 tons per year. The company implements the modern enterprise management mode, with ERP system as the main body of the whole process of information management, and actively promote the standardization of management procedures, meticulous, systematic, full implementation of ISO9001 quality management system into performance management, lean production and other advanced management mode, and import ISO14001 environmental management system, the enterprise benefit and the pursuit of win-win the social benefits of the company. To get rid of the traditional concept of foundry offers only a blank, created to provide solutions, high-end castings, precision parts, customer service as the core of the new product concept, building high-grade and high-end market, enhance the value-added products. The application of the company's products mainly include elevator, motor, gear box, auto parts, valves, light industrial machinery and other industries, and focus on casting and precision machining parts. We take "Philosophy leading, equipment leader, quality leader, service leader" as he core competitiveness of enterprises. The spirit of sincere and pragmatic, tireless dedication, teamwork and beyond the game work style.
Features 1) High light transmission 2) Excellent impact resistance 3) Weather and UV resistant-properties retained for years 4) Light weight 5) Flame resistance 6) Sound and heat insulation PC SHEET1 (2).jpg PC SHEET1 (8).jpg Packaging & Shipping Packaging Both sides with PE film,logo on the pe film.Other package are available based on customer's requirment.The package also can be in rolls when the thickness less than 4mm. Delivery within 7-10 working days once we received the deposit. Payment L/C, T/T, Western Union,Paypal and so on. polycarbonate sheet (21).jpg Company Information We are Ningbo Zhongding Plastic Co.,ltd, is a professional manufacturer of polycarbonate sheet series more than 10 years. Including polycarbonate hollow sheet, polycarbonate honeycome sheet,polycarbonate u-lock sheet, polycarbonate solid sheet, polycarbonate frosted sheet, polycarbonate embossed sheet, polycarbonate diffused sheet, polycarbonate skylight. PC corrugated sheet and PC accessories. We introducing advanced management and marketing concepts. And passed the ISO9001:2008, SGS, UL certification. Professional CRM and ERP management system. Lived by advanced technology and ZHONGDING spirit " HONEST,PERSISTENT,AGGRESSIVE,INNOVATIVE", ZHONGDING polycarbonate sheet have a good quality, and enjoy a good reputation at home and aboard. We welcome your visit! 1987394266_1306342607 Polycarbonate virgin Mateiral: Virgin Material Zhongding Warehouse: 13.jpg 16.jpg Production Flow production Certifications HTB1wzlOHFXXXXbXaXXXq6xXFXXX8HTB1TOCyHFXXXXX3aXXXq6xXFXXX8 FAQ What is the payment term? Usually we accept T/T (30% deposit and balance against B/L copy), L/C. Other payment terms can be negotiable. What is the delivery time? For normal polycarbonate sheet orders, we can deliver within 10 days. For orders that require cut-to-size services and thermoforming, delivery time will be extended. Why choose us? 1. Using Makrolon/Lexan polycarbonate resin. 2. Advanced UV-PC co-extrusion lines (4 lines). 3. ISO 9001:2008 & CE&SGS aproved. 4. Customized colors and dimensions upon request. 5. CNC&thermoforming service provided. 6. OEM& Distributor welcome.
High quality single tag printe ribbons reinforced wear-resistant label printer enhanced hanging tag printer ribbons barcode paper label paper 2023 Hot Sale New Arrival Wax Resin Thermal Transfer Printer Ribbons for Barcode Printer Heat transfer printing ribbons have a wide range of applications and high-speed printing capabilities Excellent image durability, excellent wear resistance, corrosion resistance, and heat resistance Product features: 1.Excellent high-quality and high-speed printing performance. 2.Excellent wear resistance, heat resistance, corrosion resistance, and durability. 3.The label has a wide range of adaptability and meets various demanding environmental requirements. 4.High sensitivity ensures excellent image printing results. 5.The anti-static coating on the back can effectively protect the print head. 6.Applicable substrates: water washed standard materials, fabrics, nylon standards, acetate fibers, etc. Product specifications: Basic maximum width: 100%; a: 40, 60, 70, 80, 90, 110, 130, 170 mm Basic length: 210m, 300m, 450m Carbon tape rolling direction: outer carbon, inner carbon Carbon belt hub: 1 inch, 1/2 inch Shaft bayonet: 180 �° bayonet Note: Carbon belts of different sizes and colors can be customized according to your needs. if you need other specifications, please consult us!+86-13924290301 w w w . d h m t t . c o m sales@g z d h m . c n Printer Consumable-Toner, Ink and Ribbon Cartridges Satin ribbon Ricoh thermal transfer ribbon Ink ribbon printing Manufacturer of standard and custom resin and wax ribbons thermal transfer printer ribbons manufacturer of ribbon Ribbons resists scratching, smearing, flaking, and ultraviolet rays Distributor of printer ribbons Wax and resin thermal transfer ribbons types of ribbon participation ribbon rhinestone ribbon grosgrain ribbon decorative ribbon christmas ribbon wholesale ribbon lavender ribbon custom ribbon organza ribbon halloween ribbon miscarriage ribbon Single tag printer, zx40 ribbon printer, printer ribbon cartridge, digital ribbon printer, brother ribbon printer, thermal printer ribbon, label printer ribbon, satin ribbon printer, epson ribbon printer, zebra printer ribbon, ink ribbon printer, barcode printer ribbon, ribbon out
Application &typical recommended dosage: Sebacic acid is a nitrite-free dibasic acid, which provides excellent ferrous corrosion� inhibition properties. It can be used in a variety of lubricity & corrosion inhibitor applications ,including metalworking fluids, engine coolants, metal cleaners etc. Additionally it is mainly used to make cold-resistant plasticizers, and also used to produce� nylon 1010, nylon 810, nylon 610, nylon 9,high-temperature lubricating oil diethylhexyl ester� and alkyd resins polyurethane rubbers. 1.0-5.0% Benefits: Excellent lubricity performance Good corrosion protection No nitrites Storage: In accordance with local regulations, store in original container protected from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:  25kg/bag or jumbo bag
Hongye Chemical Co., Ltd is the leading professional manufacturer and supplier of Thiourea Dioxide and pulp bleaching agent FAS. We can produce 50000MT Thiourea Dioxide(Formamidine sulfinic acid) &pulp bleaching agent FAS. TDO is a new kind of reducing agent that used as exchange of sodium hydrosulfite. It is widely used in textile and paper making industry. This product is also used in leather processing industry, paper, pulp and board industry, photographic industry, bleaching and reducing agents. This product is also a component of decolorisation agents. In macromolecule material industry, it is used as catalysis agent and stabilizer of resinic producing, and it is also used in organic synthesization of sensitizing material, and medicine, medical, spicery materials in fine chemicals, and also can be applied in the recycling and separating of heavy metals.
Geosino with Over 20 years of experience for Geomembrane manufacturing , HDPE/LLDPE smooth/ textured geotechnical anti-seepage membrane is manufactured by Italian automatic geotechnical production equipment, uniform plasticization and co-extrusion. It is produced with high-quality special polyethylene virgin resin and imported carbon black from Cabot. Geosino Geomembrane products protect the earth from waste and pollutants, protect investment, and ensure the integrity and sustainability of important infrastructure in harsh environments. We have expertise in all geosynthetics and are committed to continuous innovation. Our vision is to promote the development of geosynthetics industry, improve industry standards and create more reliable, stronger, pollution-resistant and ubiquitous products. Geosino Geomembranes are used in a variety of applications, such as: Water reservoirs Landfills lining and capping Irrigation canals Mining Highways, dams, lake banks Aquaculture Pond lining Lining of metal tanks
PSA adhesive a large number of springs are used in mattresses and sofas. After the springs are wrapped in non-woven fabrics, they need to be assembled with hot melt PSA glue. Our psa glue is easy to melt, has good bonding strength, is environmentally friendly and has no odor. In addition, mattress compounding, sponge, polyester cloth, cotton cloths, etc. all need PSA pressure sensitive adhesive glue. What material is PSA Adhesive? PSA stands for pressure-sensitive adhesive. It's not one specific material, but rather a type of adhesive that forms a bond when pressure is applied. These adhesives are typically made from a combination of materials, including: Synthetic polymers: These provide the base for the adhesive and give it strength and flexibility. Examples include acrylic, styrene, and rubber polymers. Tackifying resins: These enhance the adhesive's ability to grab and hold onto a surface. For more information about hot glue price, please feel free to contact us!
Barytes is a naturally occurring sulfate of barium. with chemical formula, BaSO4 (BaO 65.7% and SO3 34.3%).By virtue of its high specific gravity, it is known as one of the heaviest Mineral on Earth. The Physiochemical test reflects its high bulk density of 1.5 gm/cc, insolubility in water, resistance to acids and alkalies, low abrasiveness and high refractive index of 1.63, The mineral has perfect cleavage, brittle with an uneven fracture. The hardness varies from 3 to 3.5 on Mohâ??s scale. The specific gravity of pure barytes is 4.5 and this can vary downward, depending on the impurities present. The mineral has white streak with the lustre inclining to resinous. The Mineral is available in grades of Off White, A1, Snow White, Super Snow White & Extra Super Snow White
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature. Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries: 1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.) 2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.) 3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature. Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries: 1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.) 2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.) 3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
Mica sheet is made of high-quality Muscovite paper, phlogopite paper or synthetic mica paper as the base material,high-temperature silicone resin as the adhesive, baked and pressed at high temperature. Hard mica board is specially developed and designed to meet the characteristic requirements of high temperature insulation and electrical insulation. It is mainly used in the following industries: 1.Household appliances industry (including oven, toaster, hair dryer, electric kettle, electric iron, air heater, curler, electricwire heater, wallboard heater, etc.) 2.Metallurgical Industry (electric frequency furnace, industrial frequency furnace, electric arc furnace, etc.) 3.Chemical industry and medical equipment industry, as heating bracket, gasket, partition, etc.
