English name lycerol tristearate Molecular formula C57H110O6 Molecular weight 891.49 Type - Non-ionic CAS No - 555-43-1 Quality Index Appearance: Colorless crystal or powder Acid value (mgKOH/g): 5 Saponification value (mgKOH/g): 191-202 Freezing point (): 56-60 Physical and chemical properties : Odorless and sweet. Soluble in hot alcohol, chloroform, benzene, insoluble in water-cooled alcohol. The melting point is about 55C. Function and use This product has the functions of emulsifying, lubricating, hardening, etc. It is used as emulsifier, lubricant, ointment base, etc. in pharmaceuticals. Commonly used in the manufacture of creams, ointments, suppositories, lotions, etc. This product is also a food additive, used in the manufacture of emulsified food, cakes, etc. It is also widely used in the daily chemical industry for the manufacture of creams, soaps, shampoos, waterproof papers, adhesives and other daily chemical products. For metal polishing, also for adhesives, dentures, polishes and waterproof paper production. It is used as an auxiliary agent for sizing and leather fatliquoring in the textile industry.
Ethyl Acetate, Technical is a colorless liquid that smells like pear drops. It can be found in glues, nail polish removers, cigarettes and other products. Primarily used as a diluent and solvent thanks in part to its low cost and toxicity it is also used in Laboratory settings for column chromatography and extractions. Technical grade products supplied by Spectrum are indicative of a grade suitable for general industrial use.
Sizes(mm): 1220�?2440mm, 1220*1830mm 1560*3050mm, 2050x3050mm Color: White, Black (other colors) Thickness: 2m-25mm Density: 0.33g/cm�³--0.9g/cm�³ Printing processes: Screen printing and direct to substrate digital printing; Forming and Fabrication Suitable for guillotining, cutting, sawing, drilling, milling and routing, drape forming, thermoforming,hot air welding and hot plate welding.
4-Bromophenyl phenyl ketone - Physico-chemical Properties Molecular Formula C13H9BrO Molar Mass 261.11 Density 1.421g/cm3 Melting Point 78-82 Boling Point 346.8 C at 760 mmHg Flash Point 81.3 C Vapor Presure 5.62E-05mmHg at 25 C Appearance White crystal Storage Condition Room Temprature Refractive Index 1.61 MDL MFCD00000103 4-Bromophenyl phenyl ketone - Risk and Safety 4-Bromophenyl phenyl ketone - Nature storage conditions Sealed in dry,Room Temperature morphology Crystalline Powder color White to light beige water solubility Insoluble in water but slightly soluble in other solvents such as ethanol, ether and benzene. BRN 1910182 InChIKey KEOLYBMGRQYQTN-UHFFFAOYSA-N EPA chemical information 4-Bromobenzophenone (90-90-4) 4-Bromophenyl phenyl ketone - Uses and synthesis methods category toxic substances toxicity classification highly toxic acute toxicity abdominal cavity-mouse LD50: 100 mg/kg; Intravenous-mouse LD50: 100 mg/kg flammability hazard characteristics Thermal decomposition discharges toxic bromide smoke storage and transportation characteristics dry ventilation low temperature of the warehouse fire extinguishing agent water, carbon dioxide, foam, sand, dry powder
Product Name carbon steel plate, carbon steel sheet Length 2438mm/2500mm/3000mm/5000mm/6000mm/as you required Width 1219mm/1250mm/1500mm/2500mm/3000mm/as you required Thickness 0.3-250mm Standard AISI,ASTM,DIN,JIS,GB ,JIS,SUS,EN,etc Technique Hot rolled/Cold rolled Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Thickness Tolerance �±0.03mm Material GB: Q195, Q215, Q235A, Q235B, Q235C, Q235D, Q255A, 255B, Q275, Q295A, Q295B, Q345B, Q345C, Q345D, Q345E, Q390A, Q390B, Q390C,Q390D, Q390E, Q420, Q420B, Q420C, Q420D, Q420E, Q460D, Q460E, Q500D, Q500E, Q550D, Q550E, Q620D, Q620E, Q690D, Q690E EN: S185,S235JR, S275JR, S355JR, S420NL, S460NL S500Q, S550Q, S620Q, S690Q ASTM: Grade B, Grade C, Grade D, A36, Grade 36, Grade 40, Grade42, Grade 50, Grade 55, Grade 60, Grade 65, Grade 80 JIS: SS330, SPHC, SS400, SPFC, SPHD, SPHE Application 1.Automobile, Bridges, Buildings. 2.Machinery, Pressure vessel industries. 3.Ship building, Engineering construction.4.Mechanical manufacturing, Pavement slab, ect. MOQ 3Tons Shipment Time Delivered within 7-15 days after the receipt of deposit Capacity 20000Tons/Month Payment term 30%TT Advance + 70% Balance Price term CIF CFR FOB EX-WORK
Refined Sunflower Oil, Soya Oil, Cold Pressed Oil, Kacchi Ganni, Cold Pressed Ground Nut Oil..
There is no doubt that continuous waste plastic pyrolysis plant is based on batch equipment design, so their main pyrolysis process is consistent with the principle, the latter is only more intelligent and easier to operate, which also reduces the more manpower and material resources. Its main advantage over small pyrolysis equipment is that it can continue to work 24 hours a day. There is no need to stop in the middle because of loading and unloading or cooling, which can save a lot of time and make the whole process more efficient. First of all: Put the collected plastic products into the plastic crusher and crush the waste plastic. This will not only save space but also accelerate the reaction speed of waste plastics in the furnace, and in short, it can improve the operating efficiency of the equipment. Secondly, the broken waste plastic is fed into the reactor through a pusher and the reactor is heated. The temperature of the reactor reached a certain height, and waste plastic pieces cracked out of oil and gas, carbon black. Once again, the oil and gas that has been cracked enter the condensing system. When the hot oil and gas meets cold, it is liquefied into heavy oil and falls into the oil tank. Then: For the treatment of the three wastes of waste gas and waste water generated during the operation of the equipment, the company launched a desulfurization and deodorization tower system to thoroughly help customers solve the problem of factory odors and meet European and American environmental protection and emission standards. Finally, the carbon black be outputed. Advantages of continuous pyrolysis equipment: 1. The PLC control system can improve equipment operating efficiency.Because it can continuously feed materials continuously for 24 hours. Great savings in manpower and material resources. 2. The single machine processing capacity is large and the floor space is small, saving the cost of purchasing land in the previous period. 3. Use an accurate calculation system to ensure that the feed is fully cracked and the oil yield is high. 4. Indirect heating system, long service life. The end products of DoingGroup's continuous waste plastic cracking equipment mainly include fuel oil, carbon black and combustible gas. Their specific uses are as follows: 1. Fuel: Mainly used for heating oil in iron and steel plants, and boiler plants. It is also commonly used in heavy oil generators to generate electricity. 2. Carbon black: Carbon black briqutting can be produced for burning, refining from carbon black , can be produced for new tires, and pigment manufacturing materials.
Hexanediol Diacrylate, Hdda, Tripropylene Glycol Diacrylate, Tmpta, Dipropylene Glycol Diacrylate, Dpgda, Bisphenol A Diacrylate, Polyethylene Glycol Diacrylate, Tricyclodecane Dimethanol Diacrylate, Tcdda, Pentaerythritol Triacrylate, Peta, Trimethylopropane Triacrylate, Tmpta, Glycerine Po3 Triacrylate, Gpta, Ditrimethylopropane Tetraacrylate, Dtmptta, Ditmpta, Dipentaerythritol Hexacrylate, Dpha, Lauryl Methacrylate, Lma, Stearyl Methacrylate, Sma, 2 Hydroxyethyl Methacrylate, Hema97, Hema98, Hema, Isobornyl Methacrylate, Iboma, Ethylene Glycol Dimethacrylate, Egdma, 1 4 Butanediol Dimethacrylate, Bddma, Trimethylopropane Trimethacrylate, Tmptma, Acryloyl Morpholine, Acmo, Dmaa, Dcpoa, Dcpoma, Chdmma, Trimethylopropane, Tmp, Di Trimethylolpropane, Di Tmp, Dipentaerythritol, Dpe, Pentaerythritol, Pe, Tetrahydrofurfuryl Alcohol, Benzophenone, Bp, Bisphenol A Epoxy Difunctional Acrylate Oligomer, Epoxidized Soybean Acrylate, White Oil, Food Grade White Oil, La, Ctfa, Phea, Ida, Iboa.
Oils for Ink, Resin and Paint Industries ink-coating-oilsPanama Petrochem Ltd, under the brand name PANOL, provides a wide range of products for heatset, coldset, offset and web base inks of various grades of Petroleum Distillates with controlled aromatics and boiling ranges. Range includes Naphthenic Oils with desired boiling ranges and viscosity, Mineral Oils and Black Ink Oils and Bituminous Varnishes suitable for web base inks. All products and processes comply with international quality standards and norms for the lowest PCA content. Other products provided includes Petroleum Jelly for better tack, gloss and viscosity controls of inks, products for resin & pant industries with LAWS & Distillates for controlled aromatics . Product is offered in HDPE Drums / Steel Drums / IBC and bulk Flexi bags or ISO tanks. *Customised Specifications can be offered on request. Our Products: Petroleum Distillates Aroma Free Distillates Naphthenic Oils High Viscosity Oils (Naphthenic & Paraffinic) Black Ink Oils Bituminous Black Varnishes Petrolatum (Petroleum Jelly) Low Aromatic White Spirits (LAWS)
Chemicals like glycol ether eb, propylene glycol, sodium hydroxide caustic soda, silicones, sodium hydrosulphite, hydrochloric acid, calcium chloride ethyl alcohol, nitric acid, soda ash, oxalic acid, vanadium pentoxide, activated carbon, ormaldehyde, hydrogen peroxide, citric acid, sles 70, labsa 96, refined parafin wax, borax, hdpe, pet flakes ldpe, pet bottles , acetic acid, ammonium nitrate, strontium hydroxide , organice chemicals, chemicals, water treatment chemicals, potassium hydroxide | koh, potassium iodide, propylene glycol biobased, propylene glycol tech, propylene glycol usp/ep, prosolv smcc, pvp | povidone, pvp iodine, sodium bicarbonate no. 1, sodium chloride purified, sodium hydroxide | naoh, sodium thiosulphate, glycol biobased, glycol tech, glycol usp/ep, grape seed oil guar gum, hydrochloric acid 31.45%, inositol, iodine.
APIROMA SKIN TREATMENT SOAP & Cream is made from carefully selected pure natural essential oils and bee products (using 100% palm oil base in the case of Apiroma Soap). It contains the highest grade of tea tree oil, lavender oil and propolis extract. Its natural antiseptic and anti-fungus properties make it ideal for those with problem skin. It also contain honey & royal jelly which provides moisturizing nourishment for the skin and the natural gelatins from Royal Jelly has been proved to stimulate the growth of new cells on our skin. When used everyday, the soaps (suitable for all skin types), protect your skin from unwanted bacteria and fungi, keeps skin fresh and clean all day. For more serious condition, apply the Apiroma Skin Treatment Cream on the affected area.
Panama Petrochem Ltd, Manufactures White Oils from low pour point severely Hydro treated Base Oils, ranging from low viscosity to very high viscosity grades. All products and processes comply to National & International Standards and Pharmacopoeias such as IP, BP, USP & EP. Products are also approved and certified by FDA – lndia. White Oil manufactured by Panama Petrochem Ltd is used as a blending base for Pharmaceutical and Cosmetic Products such as creams, lotions, hair oils, petroleum jelly, ointments, laxatives etc. It also find application in many other industrial segments such as polystyrene manufacturing, food packaging industries, protective coatings for fruits and vegetables, food preservatives, veterinary preparations etc. Product is offered in HDPE Drums / Steel Drums / IBC and bulk Flexi bags or ISO tanks. *Customised Specifications can be offered on request.
The parallel oil filter element consists of multiple filters connected in parallel, with a small size, large filtration area, easy disassembly and assembly, and convenient cleaning. Suitable for large-flow hydraulic lubrication systems. Used for oil suction filtration, removing solid particles and colloidal substances in the working medium, and effectively controlling pollution. Installed below the liquid level of the fuel tank, using stainless steel or copper mesh filter material that can be cleaned and reused. Features: 1.Multi-layer composite filter paper has high accuracy; 2.Large dirt holding capacity and long service life; 3.High flow density, reducing the size of fine filters; 4.Complete specifications and varieties to meet various fine filter needs. Parallel filter technical parameters: Material: SUS304 Working medium: mineral oil, emulsion, water-glycol, phosphate ester hydraulic fluid Working temperature Accuracy: 5-400 low: 150-5000L/min Size: Manufactured according to user needs Application field 1. Metallurgy: Filters hydraulic systems in rolling mills, continuous casting machines, and lubrication equipment. 2. Petrochemical: Separates and recovers products, intermediate products during oil refining and chemical production. Filters particles from oil field injection well water and natural gas. 3. Textile: Purifies and filters polyester melt during drawing process. Protects air compressors and removes water and grease from compressed gas. 4. Electronics and pharmaceuticals: Filters reverse osmosis water, deionized water, cleaning solution, and glucose. 5. Thermal power and nuclear power: Purifies gas turbine, boiler lubrication system, speed control system, bypass control system oil, feed water pump, fan, and dust removal system. 6. Mechanical processing equipment: Purifies lubrication systems in papermaking, mining, injection molding, and precision machinery. Filters compressed air, recovers dust, and purifies tobacco processing and spraying equipment. 7. Automotive: Filters engine and transmission oil, fuel, and air intake. 8. Food and beverage: Filters raw materials, clarifies juice and wine, removes impurities from cooking oil, and filters production water. 9. Agriculture: Filters irrigation water, pesticides, fertilizers, and liquid fertilizers. 10. Water treatment: Filters and purifies drinking water, wastewater, and swimming pool water.
Transformer Oils are electrical insulating oils produced by distillation of virgin paraffinic and naphthenic crude oils followed by modern technologies involving high pressure hydrogenation and hydro-treatment. All the processes are monitored closely and appropriate Base Oil fractions are selected for further processing. Further processing involves removal of moisture and polar impurities to obtain good electrical properties. The technologies result in products with very low pour point, excellent oxidation stability, cooling characteristics and electrical properties. These properties make them suitable for the most demanding transformer applications. Tranformer Oil product range Savita grades Specification Transol GE Transol GE IEC60296:2012 Uninhibited Transol GET IEC 60296 : 2012 T Trace Inhibited Transol GEX IEC 60296 : 2012 Inhibited Transol GA ASTM D 3487 TYPE I Transol GAX ASTM D 3487 TYPE II Transol GB I BS 148:1998 CLASS I Transol GB II BS 148:1998 CLASS II Transol GBX I BS 148:1998 CLASS IA Transol GBX II BS 148:1998 CLASS II A Transol HGX IEC 60296 : 2012 Inhibited high grade Transol GIS TYPE I IS 335: 2018 TYPE I Uninhibited Transol GIX TYPE I IS 335:2018 TYPE I Inhibited Transol GIS TYPE II IS 335: 2018 TYPE II Uninhibited Transol GIX TYPE II IS 335: 2018 TYPE II Inhibited Applications The transformer oils are used in Distribution & Power Transformers, Switchgears and Circuit Breakers. Products Offered Transol HGX is an inhibited grade of transformer oil specifically tailored for demanding applications in EHV and UHV Transformers. Transol GE IEC60296:2012 Uninhibited is an uninhibited oil which is designed to meet Specifications as per IEC 60296:2012. Transol GA & GAX grades are offered meeting the specifications of ASTM D3487 Type I & II respectively. Characteristics The products fully meet the international and national specifications such as IS-335 2018 TYPE I & II { U & I }, IEC 60296, ASTM D 3487, BS 148, JIS, AS, ASTM. The inhibited grades have DBPC as additive, which is part of the approved list of inhibitors as per IEC 60296. The products are strictly free from PCB, DBDS or any passivator or metal de-activator. They offer excellent oxidation stability with very low acid and sludge formation when tested according to IEC 61125 and ASTM D2440 besides having excellent dielectric strength, resistivity & dissipation factor. The low pour point and low viscosity characteristics of the product enable excellent cooling properties.
Offer Especially for the Buyer. The prices exclusively CIF UREA has been recognized for its quality by local and international producers, 1. Product Name: UREA N46 Quantity: Minimum 10,000 MT-Maximum 500,000 MT Trial / Monthly Shipment GRADE PRILLED UREA Price - $420 Gross / $380 Net per MT GRANULAR UREA Price - $410 Gross / $370 Net per MT 2. Product Name: DI-AMMONIUM PHOSPHATE (DAP) Quantity: Minimum 10,000 MT Maximum 500,000 MT Trial / Monthly Shipment GRADE ALL GRADES Price - $470 Gross / $430 Net per MT 3. Product Name: NPK Quantity: Minimum 10,000 MT-Maximum 500,000 MT Trial / Monthly Shipment GRADE ALL GRADES Price - $440 Gross / $400 Net per MT Origin: Georgia/Kazakhstan Specification & Grade: Standard Export Quality and Grade Inspection: Ciq, Sgs or Equivalent Performance Bond: (Pb) 2% Performance Bond (Pb) in Favor of Buyer Payment Term: T/t, Mt 103, Sblc Mt760 & Dlc Mt700 Contract Term: Trial Shipment + Contract With Rolls & Extension Shipment & Delivery Method: Cif via Vessel to Buyers Destination/discharge Port. Other Products Available: Fuel Oil,naphtha,liquefied Natural Gas (Lng), Liquefied Petroleum Gas (Lpg) Liquefied Natural Gas (Lng) Crude Oil, Aviation Kerosene Turbine, Fuel, diesel Fuel, bitumen, gasoline Octanes, base Oil, Ethanol, methanol, petroleum Coke. FERTILIZER Urea N - NPK - DAP. Thank You For Your Interest In Our Products If You Are Interested In Any Product We Will Send You The Procedure.
Offer Especially for the Buyer. Product Name: Bitumen Quantity: Minimum 50,000 Mt Maximum 500,000 Mt Trial / Monthly Shipment Grade Bitumen 30/40 Price - $300 Gross / $260 Net Per Mt Bitumen 40/50 Price - $320 Gross / $280 Net Per Mt Bitumen 50/70 Price - $340 Gross / $300 Net Per Mt Bitumen 60/70 Price - $370 Gross / $330 Net Per Mt Bitumen 80/100 Price - $360 Gross / $320 Net Per Mt Bitumen 100/120 Price - $330 Gross / $290 Net Per Mt Viscosity Grade-10 (Vg-10) Price - $280 Gross / $240 Net Per Mt Viscosity Grade-20 (Vg-20) Price - $300 Gross / $260 Net Per Mt Viscosity Grade-30 (Vg-30) Price - $290 Gross / $250 Net Per Mt Viscosity Grade-40 (Vg-40) Price - $320 Gross / $280 Net Per Mt Zaor/sco - Validity Limited To: End Buyer Soft Corporate Offer - Cif We, in Name of the Seller, ******** Refinery, Hereby Issue This Soô??? Corporate Offer (Sco) for All Petroleum Products We Supply for Immediate Delivery on a Cif Basis: Details / Information Origin: Georgia/kazakhstan Specification & Grade: Standard Export Quality and Grade Inspection: Ciq, Sgs or Equivalent Performance Bond: (Pb) 2% Performance Bond (Pb) in Favor of Buyer Payment Term: T/t, Mt 103, Sblc Mt760 & Dlc Mt700 Contract Term: Trial Shipment + Contract With Rolls & Extension Shipment & Delivery Method: Cif via Vessel to Buyerâ??s Destination/discharge Port. Other Products Available: Fuel Oil,naphtha,liquefied Natural Gas (Lng), Liquefied Petroleum Gas (Lpg) Liquefied Natural Gas (Lng) Crude Oil,aviation Kerosene Turbine, Fuel,diesel Fuel,bitumen,gasoline Octanes,base Oil, Ethanol,methanol,petroleum Coke.
MADAGASCAR BLACK BOURBON GRADE A VANILLA BEANS : GOURMET Size: 14 cm to 17 cm Moisture: 32% - 35% Vanilin content: 1.5% - 2.2% Type: natural fresh bean Country of origin: Madagascar Shelf-life: 2 years Birth of a Precious Spice " Amidst the sun-kissed landscapes of Madagascar, a remarkable transformation unfolds, giving rise to a culinary treasure like no other. It's the birth of a precious spice, a journey that begins with the care and dedication of skilled hands. High in the vibrant vanilla plantations, Grade A Madagascar Vanilla Beans are carefully nurtured to perfection. From the moment they are delicately hand-pollinated to the time they are harvested at their prime, these vanilla beans thrive under the watchful eyes of local farmers who have honed their craft through generations. As the beans are gathered, the sun casts its gentle warmth upon them, encouraging the release of rich and aromatic vanillin compounds. The vanilla pods are then expertly cured, undergoing a meticulous process that awakens their distinctive flavor and fragrance. But the journey doesn't end there. Guided by time-honored wisdom, the cured beans embark on a new chapter, transformed into Grade A Madagascar Vanilla Powder. Through a delicate dance of grinding and refining, the beans release their essence, becoming a potent and versatile culinary enhancer. With every sprinkle of this vanilla powder, kitchens around the world come alive with the soulful essence of Madagascar. From decadent desserts to savory masterpieces, the journey of this precious spice adds a symphony of flavors that elevates each dish to artistry. It's a journey of passion, patience, and tradition â?? a journey that encompasses the very heart of Madagascar's rich soil, warm sun, and dedicated hands. As you embrace the magic of this precious spice, you partake in the culmination of centuries of knowledge, an exquisite gift that graces your creations with the essence of a distant land. Experience the birth of a precious spice, and let the legacy of Madagascar's Grade A Vanilla Powder unfold within your culinary endeavors.
Fanso Global Limited (FG) copper cathodes are known for high purity and consistent quality. Our Copper cathodes are produced using the Mount ISA electro-refining process and are 99.99% copper purity levels that meets the international quality standards BS 6017 1981 (1989) and u-Cath-1 / ASTM B-115 (1999) and are registered as LME A Grade. They are high grade and have the lowest levels of various group and individual impurities. Fanso Global Limited (FG) Copper cathodes are used in the manufacture of continuous copper rods for the wire, cable and transformer industries, and copper tubes for consumer durable goods and other applications in the form of alloys and sheets. SPECIFICATION OF COPPER CATHODE Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99.99% Dimension: 914mm x 914mm x 12mm (LME standards) Weight of each sheet: 125kgs (+/- 1%) Net weight of each pallet: 2mts (+/- 1%) Min. weight in each container: 20mts approx. Gross weight of each container: 22.20mts approx. Packing: palletized banded by aluminum bands 2. CHEMICAL COMPOSITION Copper (Cu) : min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S:.............................. 4 PPM Iron Fe:..............................2 PPM Silver(Argent) Ag::..............................10 PPM Lead Pb:..............................0.2 PPM Nickel Ni:..............................0.2 PPM Selenium Se:..............................0.3 PPM Antimony Sb:..............................0.1 PPM Silica Si:..............................0.3 PPM Cobalt Co:..............................0.2 PPM Arsenic As:..............................0.1 PPM Bismuth Bi:..............................0.1 PPM Manganese Mn:..............................0.1 PPM Tellurium Te:.............................. 0.05 PPM Aluminum Al:.............................. 0.5 PPM Magnesium Mg:.............................. 0.4 PPM Zinc Zn:.............................. 0.4 PPM -
Refined Avocado Oil, Avocado, Fruits..
Fresh olives and refined olive oil .