Product description TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
Product description TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
TC-650A/1080A window patching machine with creasing and punching is widely used in the window patching to the liquor box,gift box,tissue box,cosmetic box,toy box,etc.It can be used for window film cutting,creasing,punching,gluing and patching of card.Its electric parts are Yaskawa,Schneider,Omron 1)The paper feeder parts is controlled by the servo motor, the paper pile make the intermittent movement in the process of the paper feeding, the belts operate long life, process the paper products to the conveying parts steady and orderly. 2)The paper conveying parts installed the four conveying chains with the four pushing blocks, it can be adjusted according to the paper shape. 3)The gluing parts adopt the adjustable parts gluing structure, it is convenient for adjustable according to the paper requirement and the gluing position, save the gluing quantity, it is easy for pulling out the gluing parts, convenient for washing. The gluing roller stopped the gluing when stopped the machine. 4)The creasing and punching part can move left and right in one step.The punching is controlled by two cylinders which can move anywhere.About the scarp from punchingwill be collected in one box.The pressure of creasing can be adjust the film length no-stop.Because the advanced orientation design,the film can stay in the good position. Main Technical Model TC-650A Paper grams 200-1000g/m2 Work capacity 5000 pcs/h Blank length 150-560mm (5.91-22.04inch) Blank width 120-500mm (4.72-19.68inch) Film length 30-300mm (1.18-11.81inch) Film width 40-300mm (1.57-11.81inch) Film thickness 0.08-0.30 Main Motor power 7kw Weight 3000kg Machine size(LxWxH) 6500x1200x1600 mm Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free. 3.If parts (except wearing parts) are broken within guarantee time (it is not caused by human factor), they will be changed for free.
Product Features: Spindle type mechanical transmission, hydraulic feed. Hydraulic retracting lets drill body away from the drilling hole. Hydraulic chuck, hand-powered chuck and hand-powered cylinder chuck, they are exchangeable. Friction hoist, percussion drilling, easy to pull and push casing if equipped with vibrator. Advanced design, reasonable arrangement, compact structure, beautiful looking. Light weight, good detachability, easy to operate. Equipped with special 6mA type derrick for user ordering. Product Parameter: Drilling depth 200m Hole(Drill bit) diameter (mm) Φ115-350 Adaptable formations Loose soil and bedrock (Hardness f=6~20) Drilling method Top drive rotation, hydraulic feeding, work with mud pump or DTH hammer Rotary speed (rpm) 60�160 Torque (N.m) 5000�6500 Feeding force (Ton) 8 Lifting force (Ton) 16 Tool winch lifting force (Ton) 1.5 Drill pipe dia. Φ76/Φ89 Drill pipe length 3000 Air pressure (Mpa) 1.05-2.46 Air consumption (m3/min) 16-35 Diesel engine YN33GBZ Engine parameter 65kW/2400rpm Walking speed 0�2.5 Climbing capacity 20 Distance from ground 250 Dimension (mm) 4000x1900x2600 Unity weight (kg) 6000
Product Description: 1.Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2..Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. the chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1. Core drilling machine is a medium-shallow hole core drilling machine. It is a vertical shaft core drilling machine which is mainly engaged in diamond drilling and is suitable for various drilling process requirements. It can be matched to the corresponding motor or diesel engine. The rig structure is simple to disassemble and easy to operate. 2. Geological survey exploration, road and high-rise building foundation exploration, various concrete structure inspection holes, river dykes, roadbed grouting hole drilling and direct grouting, civil water wells and ground temperature central air conditioning, etc. 3. The drilling machine adopts automatic telescopic rig, which is supported by two high-strength oil cylinders. A group of hydraulic valves control the rig to sit on the back, which saves time and labor, is safe and reliable, and maximizes the benefits for users. 4. The chassis adopts rubber track, which is light in weight and low in life cycle cost. It can reduce the noise of the vehicle running mechanism, reduce the vibration of the vehicle body, and greatly reduce the fuel consumption. It can walk on urban roads without hurting the road surface. 5. The chassis comes with four high-strength threaded legs (or hydraulic high-legs) installation and adjustment is quick and convenient, can be used for work plane leveling, loading and unloading vehicles to reduce lifting costs and improve efficiency, can be used as an auxiliary support during work.
1.Introduction of three phase electric engineering water mill drilling rig Our company specializes in producing 4KW,5KW,5.5KW three-phase electric vertical engineering water mill drilling rig and horizontal water grinding rig and other fully enclosed new drilling rigs, and has various specifications of drill cylinders, high quality cutter heads and complete machine parts in stock to meet different needs of our customers. Water Mill Drilling Rig (also known as water drilling rig, Water Mill Drill) is a tool that can drill holes in reinforced concrete, masonry, rock, ceramics and refractory materials. It has dust-free operation, high efficiency, smooth hole wall, accurate size and light weight. The quality is reliable, the operation is flexible, and the maintenance is simple. The drilling rig is mainly used for building foundation drilling, bridge pier drilling, retaining pile drilling, anti-slide pile drilling, shale drilling, rock drilling, granite drilling, limestone drilling, reinforced concrete drilling, highway Road pile drilling, high-speed road isolation road pile drilling, quality inspection core drilling, tunnel reinforcement, municipal engineering construction, etc. Applicable objects: shale, rock, granite, special ore, limestone, reinforced concrete, etc. 2.The specifications of three phase electric engineering water mill drilling rig Item Parameters Drilling range: â?¥160mm Rated voltage: 380V 380V Rated frequency 50-60HZ Input power 4000W-5500W No-load speed 800r/min
1.Brief introductions of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig for coal mine is mainly used for drilling holes of large diameter gas (row), grouting and fire prevention holes, coal seam flooding holes, anti outburst and pressure relief holes, water penetration holes, geological exploration holes and other engineering drilling holes. It is suitable for all kinds of coal and rock drilling. But the rock strength coefficient of needs to be under 10. Appropriate drill bits and drill pipes can be used for coring, soft coal seam drilling and other engineering operations. 2. Features of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig is a combined structure of all hydraulic power head. It consists of four parts: the hydraulic pump station, the power head, the rack, the operation floor and the column support. The breakage performance is good. The components are light in weight. It is easy for underground driller to move and shift, and the drilling rig structure layout is flexible. The rig has unique hydraulic system and double pump. The rotary parameters of drilling rigs and the feeding parameters can be independently regulated, which improves the adaptability of drilling rig to various drilling processes. The power head gyrator adopts the structure of double motor and transmission spindle through hole, and the length of drill pipe is not restricted by the drilling machine, that is to choose the drill pipe with different length according to the construction conditions of the underground drilling field. The hydraulic chuck and the hydraulic gripper are used for unloading the drill pipe, which is simple, labor-saving, efficient and safe. The oil pipe connection is between the operation platform, the pump station and the main engine, so you can operate it intensively and the personnel can operate far away from the wellhead to protect personal safety. Four column support, lifting cylinder will adjust the fuselage (drilling inclination angle), which is convenient and labor-saving. With variable pump, it has infinite variable speeds regulation and great adaptability in different working conditions.
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment. KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-70D pneumatic-electric DTH drilling rig Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible. 3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig KQZ-70D Borehole diameter mm 50-80 Drilling depth m 10-15 Rotating speed r/min 112 Air consumption m³/min 3.5-4.5 Cylinder diameter mm 90 Drilling pipe mm 42 Motor power kw 3 Main engine length mm 1524 Main engine weight kg 148
1.Brief introductions of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D pneumatic-electric DTH drilling rig is a new type of high efficient rock drilling equipment, designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment. KQZ-100D pneumatic-electric DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When it is divided into the hole, the impactor will rotate in hole. the piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2.Features of KQZ-100D pneumatic-electric DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3.Specifications of KQZ-100D pneumatic-electric DTH drilling rig KQZ-100D Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 90 Air consumption m³/min 6-8 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4 Main engine length mm 2400 Main engine weight kg 224
1.Brief introductions of KQZ-100 pneumatic DTH drilling rig KQZ-100 pneumatic DTH drilling rig is a new type of high efficient rock drilling equipment designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment . KQZ-100 pneumatic DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When driving the hole, the impactor will rotate in the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom. 2. Features of KQZ-100 pneumatic DTH drilling rig Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible. 3. Specifications of KQZ-100 pneumatic DTH drilling rig KQZ-100 Borehole diameter mm 65-150 Borehole depth m 20-25 Rotating speed of drilling tools r/min 68-85 Air consumption m³/min 10-13 Cylinder diameter mm 150 Drilling pipe mm 50/ 60 Motor power kw 4.4 Main engine length mm 2400 Main engine weight kg 190
1. Applications of XYX-130 wheeled hydraulic core drilling rig Geological survey and exploration, basic exploration for roads and high-rise buildings, inspection holes for various concrete structures, river embankments, subgrade grouting holes, direct grouting, civil water well and ground temperature central air conditioners. 2.Features of XYX-130 wheeled hydraulic core drilling rig The drilling rig is equipped with wheeled walking mechanism, which is convenient for the whole machine to move. Also, because of the oil pressure feeding mechanism, the rig improves drilling efficiency. The drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod. The working efficiency is high and the operation is convenient, safe and reliable. The drilling rig is equipped with pressure gauge so the operatpr will know the bottom hole condition during drilling process. 3.Technical parameters of XYX-130 wheeled hydraulic core drilling rig XYX-130 wheeled hydraulic core drilling rig Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm Drilling rod diameter 50mm Drilling angle 90°-75° Drill weight 950kg Spindle Spindle speed 142 285 570r/min Spindle stroke 450mm Windlass Maximum lifting weight of single rope 1600kg Single rope lifting speed 0.41 0.82 1.64m/s Drum diameter 140mm Wire rope diameter 13mm Wire rope capacity 27m Mud pump Type Horizontal single cylinder double action Displacement diesel engine / motor 95/77 l/min Maximum pressure 1.2mpa Work pressure 0.7mpa Drilling depth 130m Max open hole caliber 220mm End hole caliber 75mm
Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
SF-1D hydraulic bushingIt is the substitute of and parallels in performance with abroad DP4.It has been designed to special working condition of reciprocating motion and meanwhile considering the motion way of oil pump and damper. SF-1D in particular fits frequently reciprocating motion with a high side force. The upgrade products will cover a wide application in automobile,, motor damper and oil pumps, etc.Product Technical Data:Load capacity�140N/mm2 Temperature�-195~+280°C Speedlimit�3m/s;; Friction;coef(μ)�0.04~0.20 PV;limit�dry��3.8N/;mm2.m/s PV;limit�oil��50N/;mm2.m/sProduct Feature And Application· Good wear and low friction performance over a wide ; range of loads, speeds and temperatures in dry running ; conditions· Very good performance in lubricated applications· Good performance in greased applications· Suitable for ; linear, oscillating and rotating movements· Lead-free ; material compliant to RoHS specifications. Automotive : Braking systems, clutches, gearbox and transmissions, hinges : door, bonnet, boot, cabriolet ; roof tops,pedals, pumps : axialpiston, radial piston, gear and ; vane, seat mechanisms, steering systems, struts and shock ; absorbers wiper systems, etc.Industrial : Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment,forming machines :metal, plastic and rubber, office ; equipment,medical and scientific equipment, packaging equipment,pneumatic and hydraulic cylinders, pumps and motors, ; railroadand tramways, textile machinery, valves, etc.Product Etailsmicrosection  ---PTFE with Oil Fibre, 0.01~0.03mm---Porous bronze, 0.2~0.3mm   (CuSn8Zn3:Sn
SF-1D hydraulic bushingIt is the substitute of and parallels in performance with abroad DP4.It has been designed to special working condition of reciprocating motion and meanwhile considering the motion way of oil pump and damper. SF-1D in particular fits frequently reciprocating motion with a high side force. The upgrade products will cover a wide application in automobile,motor damper and oil pumps, etc.Product Technical Data:Load capacity�140N/mm2 Temperature�-195~+280°C Speedlimit�3m/s;; Friction;coef(μ)�0.04~0.20 PV;limit�dry��3.8N/;mm2.m/s PV;limit�oil��50N/;mm2.m/sProduct Feature And Application· Good wear and low friction performance over a wide ; range of loads, speeds and temperatures in dry running ; conditions· Very good performance in lubricated applications· Good performance in greased applications· Suitable for ; linear, oscillating and rotating movements· Lead-free ; material compliant to RoHS specifications. Automotive : Braking systems, clutches, gearbox and transmissions, hinges : door, bonnet, boot, cabriolet ; roof tops,pedals, pumps : axialpiston, radial piston, gear and ; vane, seat mechanisms, steering systems, struts and shock ; absorbers wiper systems, etc.Industrial : Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment,forming machines :metal, plastic and rubber, office ; equipment,medical and scientific equipment, packaging equipment,pneumatic and hydraulic cylinders, pumps and motors, ; railroadand tramways, textile machinery, valves, etc.Product Etailsmicrosection  ---PTFE with Oil Fibre, 0.01~0.03mm---Porous bronze, 0.2~0.3mm   (CuSn8Zn3:Sn
SF-1D hydraulic bushingIt is the substitute of and parallels in performance with abroad DP4.It has been designed to special working condition of reciprocating motion and meanwhile considering the motion way of oil pump and damper. SF-1D in particular fits frequently reciprocating motion with a high side force. The upgrade products will cover a wide application in automobile,com, motor damper and oil pumps, etc.Product Technical Data:Load capacity�140N/mm2 Temperature�-195~+280°C Speedlimit�3m/s;; Friction;coef(μ)�0.04~0.20 PV;limit�dry��3.8N/;mm2.m/s PV;limit�oil��50N/;mm2.m/sProduct Feature And Application· Good wear and low friction performance over a wide ; range of loads, speeds and temperatures in dry running ; conditions· Very good performance in lubricated applications· Good performance in greased applications· Suitable for ; linear, oscillating and rotating movements· Lead-free ; material compliant to RoHS specifications. Automotive : Braking systems, clutches, gearbox and transmissions, hinges : door, bonnet, boot, cabriolet ; roof tops,pedals, pumps : axialpiston, radial piston, gear and ; vane, seat mechanisms, steering systems, struts and shock ; absorbers wiper systems, etc.Industrial : Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment,forming machines :metal, plastic and rubber, office ; equipment,medical and scientific equipment, packaging equipment,pneumatic and hydraulic cylinders, pumps and motors, ; railroadand tramways, textile machinery, valves, etc.Product Etailsmicrosection  ---PTFE with Oil Fibre, 0.01~0.03mm---Porous bronze, 0.2~0.3mm   (CuSn8Zn3:Sn
SF-1D hydraulic bushingIt is the substitute of and parallels in performance with abroad DP4.It has been designed to special working condition of reciprocating motion and meanwhile considering the motion way of oil pump and damper. SF-1D in particular fits frequently reciprocating motion with a high side force. The upgrade products will cover a wide application in automobile,motor damper and oil pumps, etc.Product Technical Data:Load capacity�140N/mm2 Temperature�-195~+280°C Speedlimit�3m/s;; Friction;coef(μ)�0.04~0.20 PV;limit�dry��3.8N/;mm2.m/s PV;limit�oil��50N/;mm2.m/sProduct Feature And Application· Good wear and low friction performance over a wide ; range of loads, speeds and temperatures in dry running ; conditions· Very good performance in lubricated applications· Good performance in greased applications· Suitable for ; linear, oscillating and rotating movements· Lead-free ; material compliant to RoHS specifications. Automotive : Braking systems, clutches, gearbox and transmissions, hinges : door, bonnet, boot, cabriolet ; roof tops,pedals, pumps : axialpiston, radial piston, gear and ; vane, seat mechanisms, steering systems, struts and shock ; absorbers wiper systems, etc.Industrial : Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment,forming machines :metal, plastic and rubber, office ; equipment,medical and scientific equipment, packaging equipment,pneumatic and hydraulic cylinders, pumps and motors, ; railroadand tramways, textile machinery, valves, etc.Product Etailsmicrosection  ---PTFE with Oil Fibre, 0.01~0.03mm---Porous bronze, 0.2~0.3mm   (CuSn8Zn3:Sn
CBN Grinding Wheel CBN grinding wheel, cbn sharpening wheel are used for internal grinding universal joint, camshaft,crankshaft grinding, HSS saw blade grinding and bandsaw blade sharpening Alias: cbn wheel, cbn abrasive wheel, cbn sharpening whee Application: Auto, woodworking machining Details resin cbn grinding wheel Resin bond CBN Grinding Wheel Flat CBN Grinding Wheel. 1a1 Resin cbn grinding wheel is used for grinding high speed steel (HSS), bearing steel, stainless steel and titanium steel, etc CBN Grinding Wheel for HSS Saw Blade. CBN grinding wheels are widely used for face grinding, top grinding, flank grinding, hollow tooth grinding and re-sharpening for HSS saws CBN Grinding Wheel for Chain Saw Sharpening. 1F1, 3F1 cbn grinding wheel for sharpening steel chain. vitrified cbn grinding wheel Vitrified bond CBN Grinding Wheel CBN Wheel for Internal Grinding. 1a8, 1a1w Vit CBN grinding wheel for internal grinding hydraulic industry, universal joint, gears bores and roller, cylinder, etc CBN Wheel for Grinding Camshaft & Crankshaft.Vitrified bond CBN Grinding Wheel is suitable for high-efficient heavy grinding of camshaft / crankshaft of automobile parts Vit CBN Wheel for Face Grinding Steel Part. 6A2 Vitrified cbn wheel is used for face grinding (Ra 0.2 finish ) steel part in automotive industry
SF-1D hydraulic bushingIt is the substitute of and parallels in performance with abroad DP4.It has been designed to special working condition of reciprocating motion and meanwhile considering the motion way of oil pump and damper. SF-1D in particular fits frequently reciprocating motion with a high side force. The upgrade products will cover a wide application in automobile, motor damper and oil pumps, etc.Product Technical Data:Load capacity�140N/mm2 Temperature�-195~+280°C Speedlimit�3m/s;; Friction;coef(μ)�0.04~0.20 PV;limit�dry��3.8N/;mm2.m/s PV;limit�oil��50N/;mm2.m/sProduct Feature And Application· Good wear and low friction performance over a wide ; range of loads, speeds and temperatures in dry running ; conditions· Very good performance in lubricated applications· Good performance in greased applications· Suitable for ; linear, oscillating and rotating movements· Lead-free ; material compliant to RoHS specifications. Automotive : Braking systems, clutches, gearbox and transmissions, hinges : door, bonnet, boot, cabriolet ; roof tops,pedals, pumps : axialpiston, radial piston, gear and ; vane, seat mechanisms, steering systems, struts and shock ; absorbers wiper systems, etc.Industrial : Aerospace, agricultural equipment, construction equipment, food and beverage, material handling equipment,forming machines :metal, plastic and rubber, office ; equipment,medical and scientific equipment, packaging equipment,pneumatic and hydraulic cylinders, pumps and motors, ; railroadand tramways, textile machinery, valves, etc.Product Etailsmicrosection  ---PTFE with Oil Fibre, 0.01~0.03mm---Porous bronze, 0.2~0.3mm   (CuSn8Zn3:Sn