The natural colour of Mango wood is most often golden brown, although there are also variations that have a more yellow tint, or feature black or pink streaks across its surface. The wood is often beautifully discoloured due to 'spalting', where wood can change different colours as a result of fungus
Has superior quality not inferior to teak wood This wood turns out to have export quality and is able to compete with teak wood. This fact shows that the wood or coconut glugu is of very high quality and is suitable for making furniture. Here are some of its characteristics: Has a fairly long size ranging from 5 to 30 meters. Brownish red in color. The darker the color of the wood, the darker it becomes. On the other hand, if it is young, the color of the wood is light brown or yellowish brown. The level of strength of young coconut glugu is not as strong as that of old ones. It has a large fiber shape that makes the surface texture rough. Quality coconut wood has a dense texture so it doesn't make a loud sound when tapped.
Wood Pallets from Indonesia spacifikasi Red Meranti Hardwood and Merbau Hardwood Parameter Unit AR DB Total Moisture %WT 6,47 - Ash Content %WT 0,42 0,45 Volatile Matter %WT 75,73 80,97 Fixed Carbon %WT 17,38 18,58 Total Sulfur %WT 0,09 0,09 Gross Calorific Value Kca/Kg 4544 4859 Some other advantages in the use of wood pellets in the household are as follows: 1.Save wood, by using this the use of wood becomes less 2.Cost-effective, reducing costs that are usually used to purchase LPG gas 3., no smoke in the use of wood pellets 4.Clean, when compared to LPG or firewood which causes blackened kitchen walls. 5.Healthy, reduced CO2 emissions 6.Safe, no risk of explosion in the use of wood pellets
It has a beautiful natural honey golden hue, but more importantly it is famous for being highly resistant to rot, pests (bugs, termites and worms), and fungi in both land and marine environments. Teak is the premier choice for any requirement in the marine industry, from decks and interior work, to docks. Teak is naturally water-resistant and physically very strong and durable. It is not prone to significant expansion or contraction with humidity changes. The oils in teak are what make it weather-resistant and it requires basically no care when left outside. Its high silica content gives it non-skid properties as well as durability. This makes teak a great choice in damp environments, or in areas where slipping could be very dangerous. Application: Ship and boatbuilding, veneer, furniture, exterior construction, carving, turnings, and other small wood objects. Below are the popular sizes we are offering: Teak Round Logs Teak round logs are a premium choice for those in the market for lumber and timber products. The round logs are the result of a peeling process that removes the bark and exposes the wood's natural grain. Teak Square Logs Teak square logs are created through a process that involves cutting the round logs into square pieces, exposing the natural grain of the wood. This process results in a beautiful and smooth surface that is ready for further processing. Teak Cut to Size Timber Teak Cut to size timber has been precisely cut to the desired dimensions and specifications of a customer. The benefit of cut to size timber is that it eliminates the need for the customer to do any additional cutting or shaping, saving time and effort. Origin: Burma, Ecuador, India, Panama, Costa Rica, Nigeria, Ghana, Brazil, etc. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2
This is a temperate hardwood. Oak tree has deep roots and grows on a heavy, wet soil. It grows from 65 feet to 130 feet in height with trunk as wide as 15 inches to 30 inches in diameter. White Oak is a rough barked tree of great and impressive girth. This is a strong rot-resistant, beautiful, easy to work, economical and holds exceptional value to woodworkers. Features: Durable, Long-lasting, less likely to warp when exposed to sunlight, good water-resistant properties, highly resistant to wear and tear, ideal for liming, stains and polishes well, etc. We can offer below types: White Oakwood (Origin: France, Germany, Finland, Ukraine, Romania) Red Oakwood (Origin: United States, Western and Central Europe) Item Specification Tree Size: 65-85 ft (20-25 m) tall, 3-4 ft (1-1.2 m) trunk diameter Average Dried Weight: 47.0 lbs/ft3 (755 kg/m3) Specific Gravity (Basic, 12% MC): 0.6, 0.75 Janka Hardness: 1,350 lbf (5,990 N) Modulus of Rupture: 14,830 lbf/in2 (102.3 MPa) Elastic Modulus: 1,762,000 lbf/in2 (12.15 GPa) Crushing Strength: 7,370 lbf/in2 (50.8 MPa) Shrinkage: Radial: 5.6%, Tangential: 10.5%, Volumetric: 16.3%, T/R Ratio: 1.9
We bring forth a cost-effective and qualitative range of Pinewood logs that are used in a variety of applications such as industrial packaging, scaffolding and as lumber beams, etc. These are available in standard and customized sizes as per the needs and can be supplied as heat treated. Pine belongs to the Pinaceae botanical family and has over 100 different varieties, most of which can be found north of the equator. Depending upon location, pine tree can grow a maximum height of 40 m and different varieties may develop different properties. Applications: - Building and construction - Interior furnishing, furniture - Manufacture of composite wood materials - Wood and paper pulp - Masts and poles - Windows, facade panelling
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35 % - 38%
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35% - 38%
We are production of Wood Chips from raw material from waste wood log, stems & wood branch, wood veneer and another wood waste that we doing processing by machine crusher to make Chips size with specification : Moisture: 45% max, Length: More than 40mm: 5% max, From 9 - 40mm: 82% min, From 4.8 - 9.5mm: 5% min, Less than 4.8mm: 5% max, Wood bark: 3%+/-, Foreign matters: 1% max, Average Size : 2-4cm with a thickness of about 2-8mm.
SPECIFICATIONS AND QUOTATIONS BELOW We are one of leading shaving manufacturers and suppliers in EUROPE . We could supply various kinds of shavings such as pine shavings, rubber shavings, acacia shavings, mix pine and rubber shavings, mix shavingsâ?¦.. with large volume of long-term stability, competitive price. Our shavings could be used as material for animal bedding, fertilizer/ compost making and mushroom cultivation. Please refer to below for our specification of pine shavings: - Material: 100% Pine - Moisture: Max 15 % - Foreign matter: 0.1% - Powder: Max 5% - Packing style: compress and stuff in Jumbo bag, 25 tons/ cont 40HC
High Quality Africa Doussie / Tali / Azobe / Rosewood Logs Quick description The product of Rosewood logs Green weight (kg/m3) = 1100 - 1200 Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750 Volumetric swelling for 1% MC variation V% = (small) 0.44 Total tangential swelling T% = 4.6 Total radial swelling R% = 3.1 Crushing strength (N/mm2) C12 = 74* Static bending strength (N/mm2) F12 = 173* Modulus of elasticity (N/mm2) E12 = 13700* Diameter : average 80-90 cm Length: larger than 5.5 meter cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,