Useú¦telecommunication networks; local area networks; video; multimedia; premise installations Featureú¦integrated projective caps protect ferrules from dust and rule out any laser light emissions; integrated spring for a guaranteed closing of the protected cap; full ceramic ferrule; special ferrule perform for short polishing time; adjustable in 60 degree steps; excellent for high packing density Typeú¦e2000 patch cord Sizeú¦e2000/sm e2000/mm e2000/apc 0.9mm 3.0mm E2000pc/upc/apc 1pcs per plastic bag
Applications: Long distance telephone, catv, data communications. Installations: Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct Burial (with armouring). Construction: The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal. Technical parameters: Maximum transmission distance: 6km (single mode); 0.3km (multimode) Maximum pulling load: 1500n (short term installation); 900n (long term installation) Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter) Twist (torsion length): 125 x overall diameter Working temperature: -20íµ ~ +70íµ (pe sheath) Storage temperature: -40íµ ~ +70íµ (pe sheath) Product highlights: Small diameter and light weight. Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber Cable can achieve better pulling load and operating temperature. Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the Tube can provide water protection for the fibers inside the tube. Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress And achieve better flexibility. íewide operating temperature range. Roll, box, drum
í= Applications: Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable, it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between floors. í= Installations: Installed along the wall, the roof, interlayer, canal and indoor. í= Construction: The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central element made of 3 sub-units. í=Technical Parameters: íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode) íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation) íe Minimum Bending Radius: Short Term Installation: 20 x Overall Diameter Long Term Installation: 10 x Overall Diameter (Non-Armoured); 20 x Overall Diameter (Armoured) íe Twist (Torsion Length): 125 x Overall Diameter. íe Working Temperature: -10íµ ~ +70íµ (PE sheath) íe Storage Temperature: -20íµ ~ +70íµ (PE sheath) í= Product Highlights: íe Small diameter and light weight. íe The high tension characteristics of the aramid yarn serving as strength member can offer good stability in the transmission performance. íe Compact and flexible construction are especially suitable for indoor installations. íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved with excellent strip ability. íe LSZH jackets can be offered for indoor application for which flame retardancy is required. íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation within the operating temperature range. íe Fiber geometry are strictly monitored to ensure superior transmission performance. roll,box,drum
Fiber optic splice closure gl09-5 Gl09-5 fiber optic closure is horizontal with three inlet and three outlet(six ports).The outer shell is made of enhanced pc engineering plastic, its strong and light, can efficaciously prevent the lighting strikeóerosionóaging and fire resist, the tray is pulldown, so its easy installation, dont need dismantle other tray, the material of the sealing is silica gel, it can repeatable operation. The scope of application : erial, direct-buried, wall-mounting, duct-mounting, The application of temperature :-4065 8 pieces / carton
Talc is an amazingly variable mineral with a massive range of uses across several industries. It is the softest rock on the planet. Softness, water repellency, chemical inertness, platyness, and an affinity for organic compounds are all characteristics of talc Talc is a highly desired multi-functional filler and process facilitator in a wide range of applications, including plastics, paper, ceramics, and paint. The physical properties of talc are softness as it ranks 1 on the Mohs scale, natural affinity with oils making it an excellent hydrophobic mineral and its chemical inertness. It is an extremely useful mineral in the manufacturing of solar panels, semiconductors and electronics, aluminium and steel alloys, and also in the construction sector, after being transformed into silicon (Si) through gaseous reduction at high temperatures. Aryan Tiles is one of the biggest producers and suppliers for talc in India. We extract our talc mineral from several regions of Rajasthan. Our scientists and process experts collaborate with customers to develop innovative minerals that satisfy their specific industriesâ?? needs. Talc, or talcum, is a clay mineral, composed of hydrated magnesium silicate with the chemical formula Mgâ??Siâ??Oâ??â??(OH)â?? Talc provide the ideal blend of stiffness and impact strength, allowing producers to create parts that are both thinner and lighter and thus reducing overall vehicle weight within the automation sector. It also improves rubber permeability, lowers tyre rolling resistance and increases vehicle fuel efficiency. Further in the paints and coatings, talc works as an excellent natural alternative to less environmentally friendly TiO2 for increasing coating mechanical and optical qualities. Moreover, in the pulp and paper industry, talc is great for preventing deposits, allowing mills to operate in closed water circuits, and maximizing prime resources. Furthermore, in the ceramic tiles and sanitary ware, talc improves vitrification, allowing manufacturers to lower firing temperatures and shorten firing cycles. In the agriculture industry, talc-based mineral solution works as natural alternatives to pesticides for preserving fruit from the sun's rays and diseases. They are perfect for organic agriculture. Talcs are also used to make fertilizer flow and anti-caking agents. Talc has wide range of applications within several industries. And, our production and supply of talc mineral are innovative and of premium quality. We have been able to cater to the specified needs with our years of technical expertise.
Laser-Optimized Multimode Fiber Aqua Cord features 50/125-micron fiber for high-speed, high bandwidth data transmissions over 10 Gigabit Ethernet and Fiber Channel networks - the perfect solution for fiber cable runs between multiple backbone switches, hubs, and routers as well as higher end networking equipment. This LC-LC patch cable is housed in an LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity, and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices, and schools, as well as residential settings where building codes are a consideration. Each Duplex 50/125 (OM3) Multimode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability and is backed by our lifetime warranty.
Polarization Beam Splitter is designed to divide one beam of any polarization into the two beams of the polarization vertical to each. The optical route is from one fiber to two fiber. Company introduction: a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Features: Low insertion loss and high return loss Small bending radius, excellent mechanical and environmental performance Good exchangeability Good durability High temperature stability Standard : telcordia gr-326-core Available : Simplex/duplex patch cord available Fan-out available Pigtail available Various boot(cable) sizes available Fc/lc/sc/st/mtrj/mpo connectors available Lszh and pvc cable Applications: Telecommunication Computer networks Catv networks Active device termination. 1pc/plastic bag, bag size:18mmx22mm Small carton:37x28x28cm Big carton:59x39x30.5cm
This product is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on. It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. Can effectively prevent the optic fibers from the influence of outdoor environment.
High dense space.Ceramic ferrules connector.Low insertion loss.High return loss.Excellent mechanical endurance.High credibility and stability
JARCH is a professional manufacturer of slip rings, cable reel, hose reel, carbon brush and rotary joints,founded in 1998,located in Baoan,Shenzhen,with more than 80 employees and 1000m2 plant. We have 8 types of patented products at present and have established extensive and long-term cooperation with many domestic research institutes(Beijing University,SAS,,Beihang University,etc), and own a skilled management team.To creat the brand and do famous brand,we carry out strict performance ISO9001 standard of CQC. Our slip rings are widely used in civil and military fields ranging from robot,spacecrafts, industrial automation, electric power generation, measurement instruments, medial equipments to building construction. Our main products have fiber optic rotary joint / Electro optical slip ring/ through bore slip ring/ Pneumatic electric rotary union/ Hydraulic rotary union/through bore slip ring/ Pneumatic rotary joint,etc. Our products are sold to more than thirty provinces in China and exported to more than 38 countries. Our main customers have Huawei,Foxconn,Sany Heavy Industry,BYD,etc. OEM and ODM are highly welcome! Email: nico@szjarch.cn
Quick Details Place of Origin: Shenzhen, China (Mainland); Brand Name: OPTICO; Model Number: Dome splice closure; Product name: Dome Fiber Optic Splice Closure; Sealing Method: Mechanical Sealing; Material: PPR/ABS; Max Capacity: 96 cores; Cable Entrances: 2 in 2 out; Price Terms: FOB SZ 9~15 USD/pcs; MOQ: 200 pcs; Payment Terms: 30% by T/T in advance, balance before shipment; Production Lead Time: 7~15 days; Feature 1, High quality PC, ABS, PPR material optional, can ensure harsh conditions such as vibration, impact, tensile cable distortion and strong temperature changes. 2, Solid structure, perfect outline, thunder, erosion and adding resistance. 3, Strong and reasonable structure with mechanical sealing structure, can be opened after sealing and cab be reused. 4, Well water-proof and dust-proof, unique grounding device to ensure the sealing performance, convenient for installation. 5, The dome fiber optic splice closure has a wide application range, with good sealing performance, easy installation, produced with high strength engineering plastic housing, with anti-aging, corrosion resistance, high temperature and high mechanical strength and so on. Application: 1, Widely used in FTTX access network; 2, Telecommunication Networks; 3, CATV Networks; 4, Data communications Networks;
Product Name Fibre Optic Cable TYPE ASTEL Fibre Optics Cable Multi Mode Steel Tape Armoured Uni-Tube 6 core GYXTW-6F-OM3-2KM Reel Price USD 1483 MOQ 500 Meters.
Sisal fiber
Applicable fiber:Single-core silica optical fiber Applicable fiber coating diameter: 0.25 0.9 2.0 3.03 2 rubber insulated fiber Applicable bare fiber diameter:125um Cleaved fiber length:5~16mm(0.25)10~16mm(0.9) Cleaving angle:0.7 Blade life:60,000 times Dimensions:107mm (W) 94mm (D) 50mm (H) Weight:315g
Description: GJDFBV flat ribbon cable uses fiber ribbon as optical transmission medium, covered with aramid yarn as strength member, then extruded with a PVC sheath. Other sheath materials, like LSZH and TPU, are available on request. Application : 1. Ribbon fiber flexible connection jumper 2. Various indoor cabling solutions. Especially used in good laying conditions. 3. Interconnection between apparatuses Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
It is used for high-speed Ethernet signal transmission, which can transmit network signals over a long distance through two-core cables, and is suitable for places where network cable transmission is inconvenient.
CPRI fiber patch cable is the ideal design for outdoor fiber cable applications. Such product can meet the FTTA(fiber to the Antenna) program requirements for outdoor environment conditions. Especially in the 3G, 4G, Base station (BBU to RRU). CPRI fiber patch cable are rapidly becoming the standard connector interface. Product feature Ideal for outside cabling application Armored steel tape for rodent resistance Pressure resistance Fully water-blocked Moisture blocking loose tubes Fiber 2 core or 4 core Easy Operation, reliable and cost-effective Applications FTTA & FTTH Base station, BTS installation, BBU to RRU Indoor/outdoor building cabling Harsh environments application Long haul networking Direct burial and aerial lashing
Desription: 1) 100% optic test: Insertion Loss: 0.3 (PC); 0.2 (APC); 0.2 (UPC); 0.3 (SPC); 2) 100% optic test: Return Loss: 45 (PC); 60 (APC); 55 (UPC); 50 (SPC); 3) Excently qualified standard PC, APC, UPC, polishing 4) Simplex and duplex connector available 5) High precision of mechanical dimensions 6) Good exchange ability and good durability;
Description: Composite or Hybrid Cables are cables that have a number of different components laid up within the bundle. These types of cables allow for multiple transmission paths by various components, whether they be metal conductors or fibre optics, and allow the user to have a single cable, therefore reducing the overall cost and lead time for installation. Application: 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5.Cables can be designed for your custom applications Note: 1.Different conductor specification can be make as required. 2.Different Fiber specification can be make as required.
