Incoloy Alloy 908 is a high-temperature, high-strength, and highly corrosion-resistant alloy composed of elements such as nickel, chromium, molybdenum, and iron. It is a single-phase austenitic alloy, typically formed by casting and forging. Chemical composition: The chemical composition of Incoloy Alloy 908 is composed of elements such as nickel, chromium, iron, molybdenum, vanadium, manganese, tantalum, silicon, carbon, phosphorus, and sulfur. Nickel content is 40-45%, chromium content is 20-23%, iron content is 16-19%, and molybdenum content is 8-10%. Mechanical properties: Incoloy Alloy 908 has excellent high-temperature and high-strength performance. Its tensile strength is 135 ksi (930 MPa) (minimum), yield strength is 70 ksi (480 MPa) (minimum), and elongation is 25% (minimum). Physical properties: The density of Incoloy Alloy 908 is 8.14 g/cm�³, the melting point is 1338�°C (2440�°F), the thermal conductivity is 11.7 W/m�·K (100�°C), and the coefficient of thermal expansion is 13.7 �¼m/m-K (20-100�°C). Corrosion resistance: Incoloy Alloy 908 has excellent corrosion resistance, especially in high-temperature, high-pressure, and highly corrosive environments. It can withstand the corrosion of corrosive media such as sulfuric acid, hydrochloric acid, nitric acid, and fluoride, and can resist chloride stress corrosion cracking (SCC). The international standard designations for Incoloy alloy 908 include UNS N09908 and W.Nr. 1.4876. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 908 in different countries: United States: AMS 5545, AMS 5546, AMS 5547, AMS 5549, ASTM B408, UNS N09908 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4876 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy908 coil; Incoloy alloy908 strip;Incoloy alloy908 plate; Incoloy alloy908 sheets; Incoloy alloy908 tube; Incoloy alloy908 pipe;Incoloy alloy908 flat; Incoloy alloy908 bar GB:HR 6/JIS:H4551/UNS:N09908/W.Nr:1.4876
PVC Green Suction Hose Pipe Positioned as a manufacturer, exporter, wholesaler, trader and retailer, we are engaged in offering our clients with PVC Green Suction Hose. Made using finest-quality virgin PVC material that is obtained from credible vendors, these hoses are manufactured by us. Used in quarries, industries and irrigation projects, our offered hoses are available at industry leading prices. Features: Reduced resistance to flow Abrasion resistance Corrosion resistance Robust construction PVC Heavy Duty Suction Hose We are a very well known name in the market for delivering an excellent quality range of PVC Heavy Duty Suction Hose to our valuable customers. We are able to offer a highly efficient range of products. Moreover, we conduct quality tests to ensure flawlessness of our products. PVC Medium Duty Suction Hose We are manufacturer ofPVC Medium Duty Suction Hose. These Green Suction Pipe are patronized by various chemical industries, where metal pipes do not last longer due to acidic fluids and plastic pipes can not be used due to mechanical stress and high service temperature. PVC Light Duty Suction Hose We are offering a superior quality of PVC Light Duty Suction Hose that is used for sanitary sewer and gravity piping system. Made by our reliable vendors using high grade raw materials, this pipe is available in various specifications for different application areas.
Filling Fats Shortenings Confectionary Fats Cocoa Butter Substitutes Cocoa Butter Replacers
A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle. The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples eccentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple eccentric: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A swage nipple concentric is a type of pipe fitting that is used to connect two pipes of the same diameter. It is made of a single piece of metal that is swaged, or expanded, to fit tightly around the pipes. The swage nipple is then inserted into the pipes and secured with a nut. The technical specifications of a swage nipple concentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples concentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple concentrics: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.
A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases. The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Bull plugs are used in a variety of applications, including: A. Blocking off pipelines or conduits B. Isolating sections of piping for maintenance or repair C. Preventing the flow of fluids or gases D. Protecting equipment from contamination They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids. Here are some of the advantages of using bull plugs: a. They are simple and easy to install. b. They are available in a variety of sizes and materials to meet the needs of different applications. c. They are relatively inexpensive. d. They can be used to isolate a variety of fluids and gases. Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.
A pipe long nipple is a short length of pipe with threaded ends that is used to connect two pipes or fittings. Pipe long nipples are available in a variety of sizes and thread types to fit different applications. Technical Specifications 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT Applications Pipe long nipples are used in a variety of applications, including: a. Connecting two pipes b. Extending a pipe run c. Tapping into a pipe d. Repairing a leaking pipe e. Adding a fitting to a pipe Safety Precautions When working with pipe long nipples, it is important to take the following safety precautions: A. Use the correct size and type of nipple for the application. B. Make sure the nipple is properly threaded and tightened. C. Do not overtighten the nipple, as this could damage the threads. D. Use gloves and eye protection when working with pipe long nipples.
A pipe short nipple is a short length of pipe with threaded ends It is used to connect two pipes or to extend a pipe Description A pipe short nipple is a cylindrical tube with threaded ends The length of the nipple is typically less than 12 inches The diameter of the nipple is typically the same as the diameter of the pipes that it is connecting Technical Specifications The following are some of the technical specifications of a pipe short nipple 1 Size 18 Inch to 4 Inch Customized Up to 12 2 Material Carbon steel Alloy Steel Stainless steel Duplex 3 Thread NPT BSP BSPT Applications Pipe short nipples are used in a variety of applications including A Connecting two pipes B Extending a pipe C Tapping into a pipe D Mounting valves and fittings E Repairing leaks Safety Precautions When working with pipe short nipples it is important to take the following safety precautions a Use the correct size and type of nipple for the application b Do not overtighten the nipples c Use thread sealant to prevent leaks d Be aware of the pressure and temperature ratings of the nipples
A pipe closed nipple is a short, threaded pipe fitting that has closed ends. It is typically used to connect two pipes or to tee off a pipe. Pipe closed nipples are available in a variety of materials, including steel, stainless steel, brass, and plastic. They are also available in a variety of sizes, with the most common sizes being 1/4 inch, 3/8 inch, and 1/2 inch. Here is a technical specification of a pipe closed nipple: 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT When choosing a pipe closed nipple, it is important to consider the material, size, thread type, and length. It is also important to make sure that the nipple is compatible with the other components in the system. Here are some additional things to keep in mind when using pipe closed nipples: A. Pipe closed nipples should be tightened to the correct torque specification to prevent leaks. B. Pipe closed nipples should not be used in applications where they will be exposed to high temperatures or corrosive chemicals. C. Pipe closed nipples should be inspected regularly for leaks and damage.
A forged hex nipple reducing size is a type of threaded pipe fitting that is made by forging, a process that involves shaping metal by hammering or pressing it. It has a hexagonal head on one end and a threaded bore on the other end. The bore is smaller than the outside diameter of the nipple, which allows it to be used to reduce the size of a pipe. Technical Specifications: The following are the technical specifications of a forged hex nipple reducing size: 1. Size: 1/8 Inch to 2 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 5. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 6. Thread: NPT, BSP, BSPT Applications: Forged hex nipple reducing sizes are used in a variety of applications, including: 1. Plumbing 2. HVAC (heating, ventilation, and air conditioning) 3. Machinery 4. Automotive 5. Oil and gas Advantages: The following are some of the advantages of using forged hex nipple reducing sizes: 1. They are strong and durable. 2. They can withstand high pressure and temperatures. 3. They are corrosion resistant. 4. They are easy to install. Overall, forged hex nipple reducing sizes are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are strong, durable, and corrosion resistant, making them a good choice for demanding environments. However, they are also more expensive than other types of pipe fittings and may not be available in all sizes.
A forged hex nipple full size is a type of threaded fastener that is made from a single piece of metal that has been forged into shape. The nipple has a hexagonal head on one end and a threaded shank on the other end. The nipple is used to connect two pipes or other components together. Technical specification: The following are the technical specifications of a forged hex nipple full size: 1. Size: 1/8 Inch to 2 Inch 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Finish: The nipple is available in a variety of finishes, including hot-dipped galvanized, black oxide, and electroplated nickel. 4. Strength: The nipple is strong and durable, and can withstand a variety of stresses. 5. Thread: NPT, BSP, BSPT Applications: Forged hex nipples full size are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Machinery 4. Construction 5. Oil and gas 6. Marine Advantages: The advantages of using forged hex nipples full size include: 1. Strength and durability 2. Wide range of sizes and materials available 3. Variety of finishes available 4. Easy to install 5. Long service life Overall, forged hex nipples full size are a versatile and reliable type of threaded fastener that is used in a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.
A forged square plug is a type of threaded fitting that is used to block the end of a pipe or tube It is made of a solid piece of metal that is forged into a square shape with a threaded bore The threaded bore allows the plug to be screwed into the end of the pipe or tube Technical Specifications The technical specifications of a forged square plug vary depending on the material used the size and the pressure rating However some common specifications include Specifications 1 Material Steel stainless steel or other metal 2 Standard ASMEANSI B1611 3 Size 12 inch to 4 inches in diameter 4 Pressure rating 100 to 10000 psi 5 Thread NPT SAE or BSPP 6 Finish Black galvanized or other coating Applications Forged square plugs are used in a variety of applications including Oil and gas pipelines Chemical processing plants Water treatment facilities Power plants HVAC systems Marine applications Advantages The advantages of using a forged square plug include Strong and durable construction Threaded bore for easy installation Wide range of materials and sizes available Can be used in highpressure applications Overall a forged square plug is a versatile and reliable type of threaded fitting that can be used in a variety of applications It is a good choice for applications where strength durability and a wide range of materials and sizes are required
Product Description: A forged hex plug is a type of pipe fitting that is used to seal the end of a threaded pipe. It is made of a solid piece of metal that is forged into a hexagonal shape. The threaded end of the plug is compatible with a variety of pipe thread standards, such as NPT, BSP, and BSPT. Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Applications: Forged hex plugs are used in a variety of applications, including: A. Oil and gas pipelines B. Chemical plants C. Power plants D. Water treatment plants E. HVAC systems F. Plumbing systems G. General purpose applications Benefits: Forged hex plugs offer a number of benefits, including: a) Strong and durable construction b) Long service life c) Threaded end for compatibility with a variety of pipe thread standards d) Available in a variety of materials and finishes to meet specific requirements
A Forged Round Head Plug is a type of pipe fitting that is used to block the flow of fluid through a pipe. It is made of a solid piece of metal that is forged into the desired shape. The head of the plug is round and has a threaded bore that allows it to be screwed into a pipe. The following are the product description and specifications of a forged round plug: â?? Product description: A Round head plug is a mechanical fitting used to block the flow of fluid in a pipe. It is made of a solid piece of metal, typically Carbon steel, Alloy steel or Stainless steel, and has a threaded bore that allows it to be screwed into a pipe. The head of the plug is round and may be flat or domed. â?? Specifications: A. Material: Carbon steel, Alloy steel or Stainless steel, B. Size: 1/2 inch to 4 inches in diameter C. Class: 3000, 6000 Lbs. D. Pressure rating: 100 to 10,000 psi E. Thread: NPT, SAE, or BSPP F. Standard: ASME/ANSI B16.11 G. Finish: Black, galvanized, or other coating Forged Round head plugs are used in a variety of applications, including: â?? Plumbing â?? HVAC â?? Fire sprinkler systems â?? Oil and gas pipelines â?? Chemical processing â?? Water treatment They are a reliable and durable type of pipe fitting that can withstand high pressures and temperatures. Here are some additional information about forged round plugs: â?? They are typically made of carbon steel or stainless steel. â?? They are available in a variety of sizes and pressure ratings. â?? They can be threaded or socket welded. â?? They are often used in high-pressure applications, such as fire sprinkler systems and oil and gas pipelines. â?? They are also used in low-pressure applications, such as plumbing and HVAC systems. Round head plugs are a versatile and reliable type of pipe fitting that can be used in a variety of applications. They are a good choice for applications where strength, durability, and pressure resistance are important.
A forged cap is a type of pipe fitting that is used to close off the end of a pipe. It is made by forging, a process that involves heating the metal and then shaping it under pressure. This makes the forged cap strong and durable. The technical specifications of a cap will vary depending on the material it is made from, its size, and its intended application. However, some common specifications include: Material: Carbon steel, stainless steel, alloy steel, copper, brass, etc. Size: 1/2 inch to 4 inches in diameter Pressure rating: 100 psi to 2000 psi Thread type: NPT, BSPT, BSPP, etc. Finish: Galvanized, hot dipped galvanized, epoxy coated, etc.
A socket weld and threaded cross is a type of pipe fitting that is used to connect four pipes in a plane with 90 degrees between each threading The fitting has a socket on one end that is welded to the pipe and a threaded end on the other end that is screwed into the pipe Socket weld and threaded crosses are typically made of carbon steel stainless steel or alloy steel Here are some of the product description and technical specifications of socket weld and threaded cross Material Carbon steel stainless steel alloy steel End connections Socket weld and threaded Class 150 300 600 900 Size 12 4 Inch Thread NPT BSP BSSP Pressure rating 150 psi 300 psi 600 psi 900 psi Temperature rating 20F to 450F 29C to 232C Dimensions Varies depending on the size and type of fitting