1.Polyethylene glycol series products can be used in pharmaceuticals. Polyethylene glycol with low relative molecular weight can be used as solvent, co-solvent, O/W emulsifier and stabilizer, used to make cement suspensions, emulsions, injections, etc., and also used as water-soluble ointment matrix and suppository matrix, solid waxy polyethylene glycol with high relative molecular weight is often used to increase the viscosity and solidification of low molecular weight liquid PEG, as well as compensate other drugs; For drugs that are not easily soluble in water, this product can be used as a carrier of solid dispersant to achieve the purpose of solid dispersion, PEG4000, PEG6000 is a good coating material, hydrophilic polishing materials, film and capsule materials, plasticizers, lubricants and drop pill matrix, for the preparation of tablets, pills, capsules, microencapsulations, etc. 2.PEG4000 and PEG6000 are used as excipients in the pharmaceutical industry for the preparation of suppositories and ointments; It is used as a finishing agent in the paper industry to increase the gloss and smoothness of paper; In the rubber industry, as an additive, it increases the lubricity and plasticity of rubber products, reduces power consumption during processing, and prolongs the service life of rubber products. 3.Polyethylene glycol series products can be used as raw materials for ester surfactants. 4.PEG-200 can be used as a medium for organic synthesis and a heat carrier with high requirements, and is used as a moisturizer, inorganic salt solubilizer, and viscosity adjuster in the daily chemical industry; Used as softener and antistatic agent in the textile industry; It is used as a wetting agent in the paper and pesticide industry. 5.PEG-400, PEG-600, PEG-800 are used as substrates for medicine and cosmetics, lubricants and wetting agents for rubber industry and textile industry. PEG-600 is added to the electrolyte in the metal industry to enhance the grinding effect and enhance the luster of the metal surface. 6.PEG-1000, PEG-1500 is used as a matrix or lubricant and softener in the pharmaceutical, textile and cosmetic industries; Used as a dispersant in the coating industry; Improve the water dispersibility and flexibility of the resin, the dosage is 20~30%; The ink can improve the solubility of the dye and reduce its volatility, which is especially suitable in wax paper and ink pad ink, and can also be used in ballpoint pen ink to adjust ink viscosity; In the rubber industry as a dispersant, promote vulcanization, used as a dispersant for carbon black filler. 7.PEG-2000, PEG-3000 are used as metal processing casting agents, metal wire drawing, stamping or forming lubricants and cutting fluids, grinding cooling lubricants and polishes, welding agents, etc.; It is used as a lubricant in the paper industry, etc., and is also used as a hot melt adhesive to increase rapid rewetting capacity. 8.PEG-4000 and PEG-6000 . 9.PEG8000 .
1. Product: Cobalt cut cathode 2. Brand: ..... cobalt (given upon interest) 3. Quality: typical assay sent before 4. Quantity: mutually agreed up to 40MT/month, but if less required MOQ 10 mt/m can be agreed. 5. Packing: In original producer's sealed drum on pallets 6. Price: Metal Bulletin Low Grade Low Quotation Monthly Average (M) + 5% 7. Delivery: ex bonded warehouse 8. Payment: Conditional release by T/T payment 9. Shipment: from May to December, 2018
Calcined Clay or Refractory clay is obtained by Calcining (heating) superior-grade Clay at high temperatures (from 850o C to 1600o C). This removes moisture and volatiles which thereby increases the Alumina content. Compared to an Alumina content of about 30% to 40% in raw Clay, Calcined Clay has an Alumina content of 40% to 60%. The Calcination is carried out in Rotary Kilns at different temperatures ranging from 850o C to 1600o C depending upon the customer's application. Product Specification Grade Name PI- 43 PI- 43(M) PI- 50 PI- 50(M) PI- 60 AL203 % 43±1 43±1 50±1 50±1 60±1 FE203 % 1.3±0.2 1.3±0.1 1.4±0.2 1.4±0.1 1.7±0.2 AP % MAX 10 6 10 6 10 BD GM/CC 2.4±0.05 2.42±0.05 2.5±0.05 2.52±0.05 2.6±0.05 PCE o/c 31-32 32-33 33-34 33-34 34-36
Features: Are fitted with backalite/good quality plastic handle & four legs. Electrically fitted with 1Kw-2Kw single phase element of 220/50Hz as per size and three core wire. Available with thermostat and tray lifting arrangement from size 12 onwards. Available with Auto-cut off element for all sizes. Available in 304 grade SS. Sizes may vary as per requirement
Adjustable coffee spout: 80 to 140mm Adjustable coffee temperature from 80 to 90 Liquid crystal display:5 inches Pump Pressure(ULKA Pump from Italy) Adjustable coffee volume: 30-250ml In accordance with ERP standby power consumption One touch cappuchine,Latte,Espresso,Americano,Hot water,Hot milk,Milk frother function Removable waste coffee cake drawer Stand-by/Auto cut off functions Coffee powder brewing function Self-cleaning programmed/rinsing programmed Water shortage warming Multi-manual operation language (4 Languages)
WOOD PELLETS HS Code 84748090 PRICE = US$300/TON CIF ORIGIN: THAILAND PACKAGE: 65 x 15 kg bags on pallet, in total (975 kg)/ 24 pallets on a semi-trailer MIN ORDER:200 TONS DESCRIPTION BioHansawood pellets have been specially produced for heating. It is biosecure and burns well in pellet stoves. Quality standards of 6 mm or 8 mm Enplus1 premium pellet Pellets have a lenght of 5-20 mm, diam. 6 mm or 8mm Sulphur contained less than 0,05% Energy content approx. 4,8 kWh/per kg Ash contect less than 0,5% Bulk density more than 650 kg/m
Applications: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap Aluminum block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc. Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Features: Free from Nuts, Steel plate, paint Chemical Composition: AL Appearance: Silvery White
Surgical Gloves (Powdered / Powdered Free) Product Code: MED 140 Specifications: Sterile, one pair wallet and folded in a peel to open or Cut to Open pouch Size/Strength: 6.0, 6.5, 7.0, 7.5, 8, 8.5 & 9 Weight:-17 gm & 21 gm Cuff Length: -270 mm-290 mm Description Manufactured from High Quality Natural Rubber Latex. Quality Level (AQL) of 1.5 CE, ISO In-line leaching process reduce content of soluble proteins Avoidance of theorems for lower allergenic potential Manufactured and packed under clean and hygienic environment ensuring Low Bio-Burden on the gloves Consistently low protein levels Good elongation and full anatomic shape provide little hand fatigue and lasting comfort in use even during long procedures. Micro rough surface for that extra grip Lightly powdered with USP grade absorbable corn starc
Napkins per Cycle 4 to 7. Power 230 V, 10 Amp, 50 Hz. Electric Heater - 800 W. Auto power cut off Yes. No. of napkins per cycle 4 to 7. No. of Cycles per day- 9 to 10 (in 12 hours). MS body PU painted. Housing External - CRCA Steel of 1.2 mm. Housing Internal - Insulated type. Insulation - Thermal ceramic sheet with Glass wool of 4-5 mm thick Emission Outlet - 2 inch on top. Flue gas pipe - 2 meter. Residue Ash - Sterlite Ash < 2gm per cycle. Door Design - Thermal insulated door. MCB rating - 16 Amp C Series. Electric cable - 2.5 meters. Dimensions (LXWXH) mm 320X230X520. Weight 18 kg
Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc. Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime. For more information about our product, please feel free to contact us.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Teak wood decking is useful for exterior decks of swimming pool, balcony, furniture, boats. =>The wood used is from Latin America- Costa Rica, Panama =>Standard sizes: 140 mm width, 19 mm thickness, length 6-8 feet =>customized sizes also possible =>Grains are mix of flower and straight cut. Providing beautiful textures =>Ideal for buyers who are looking for cheaper substitute of Burma teak wood.
Product Specifications Refined Soybeans Oil CHEMICAL SPECIFICATIONS Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method II: 0.001% max Iodine value: 120 - 141 Free fatty acids: < 2.5 mL of 0.02 N NaOH Peroxide: 10.0 max Fatty acid composition: Palmitate: 7 - 14 Stearate: 1 - 6 Oleate: 19 - 30 Linoleate: 44 - 62 Linolenate: 4 - 11 Color Gardner: 4 max Appearance: Greenish-yellow, bright & clear oily liquid Flavor and Odor: Bland, almost odorless Typical peroxide value: < 1.0 meq/kg Smoke Point: 230C min. +/- 10C Flash Point: 330C min. +/- 10C Soybean oil Physical Characteristics Physical State: Liquid Appearance: Light Yellow, Clear and Brilliant Taste: Bland Odor: Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 â?? 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF
Product Specifications Refined Soybeans Oil CHEMICAL SPECIFICATIONS Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method II: 0.001% max Iodine value: 120 - 141 Free fatty acids: < 2.5 mL of 0.02 N NaOH Peroxide: 10.0 max Fatty acid composition: Palmitate: 7 - 14 Stearate: 1 - 6 Oleate: 19 - 30 Linoleate: 44 - 62 Linolenate: 4 - 11 Color Gardner: 4 max Appearance: Greenish-yellow, bright & clear oily liquid Flavor and Odor: Bland, almost odorless Typical peroxide value: < 1.0 meq/kg Smoke Point: 230C min. +/- 10C Flash Point: 330C min. +/- 10C Soybean oil Physical Characteristics Physical State: Liquid Appearance: Light Yellow, Clear and Brilliant Taste: Bland Odor: Bland Color: 5 - 13.5 Yellow / 0.6 - 2.0 Red Quality Standards Free Fatty Acid %: 0.05 - 0.1% Peroxide Value meq/kg: 0.5 - 1.0 meq/kg Refractive Index @ 40oC: 1.4666 - 1.47 Iodine Value (Wijs): 123 - 139 Moisture %: 0.05 - 0.1% Cold Test: 5.5 hrs OSI @ 110oC: 5.5 - 6.0 hrs Saponification Value: 191 - 192 Specific Gravity @ 25oC: 0.915 â?? 0.925 Smoke Point: 460 - 465oF Flash Point: 650 - 655oF Fire Point: 690 - 695oF
V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Quality Timber BEECH ROUND LOGS / Oak Wood Logs / Eucalyptus Logs Teak Wood - Round Logs, Sawn Timber Logs 1) OUR LOGS ARE FRESH CUT STRAIGHT LOGS 2) THE LOGS ARE FUMIGATED BEFORE SHIPMENT 3) LOGS CAN BE SHIPPED WITH BACK AND CAN ALSO BE DEBACKED DEPENDING ON THE CUSTOMER 4) MOISTURE CONTENT IS 30-45% BUT CAN BE DRIED ACCORDING TO CUSTOMERS REQUIREMENTS 5) DIAMETER OF LOGS FROM 20CM ANDABOVE 6) LENGTH OF THE LOGS FROM 1M AND ABOVE ACCORDING TO THE BUYERS REQUIREMENTS 7) THE LOGS ARE SHIPPED WOTHOUT CRACK AT THE ENDS. THEY ARE ALSO PROTECTED WITH GANG NAILS TO PREVENT SPLITING. 8) WE CAN SUPPLY ACORDING TO BUYERS REQUIREMENTS
Brimming with vital minerals, high-quality protein, and beneficial chitin, our Arctic Shrimp Shell Meal helps enhance taste and promote health and growth in various products, from food ingredients and shellfish-flavoured consumer products to animal feed, pet food and more. Product Characteristics Color: Natural pink to light browne/orange Odor: Shrimp, mild Fractions: Fine 5 mm, Mixed Blend Nutritional Values Parameters Typical values* Protein 36.0 % Fat 3.0 % Chitin 20.0 % Ash 35.0 % Moisture 6 % Calcium 13.0 % Sodium 0.5 % Phosphorus 3.2 % Magnesium 0.6 % * Depends on cut-off and milling.