We supply: 1. Okume face and Okume back ,hardwood, Combi core MR-AA Grade Face,AA Grade Back in thickness 9mm,12mm,18mm 2.Okume Face and Canarium Back, hardwood combi core MR- A Grade Face , A Grade Back in thickness 9mm,12mm,18mm 3.Okume Face and Okume Back, Eucalyptus core MR+15% Melamine- AA Grade Face , AA Grade Back in thickness 9mm,12mm,18mm 4. Okume Face and Canarium Back, Eucalyptus core MR+15% Melamine - A Grade Face , BGrade Back in thickness 9mm,12mm,18mm We also can do plywood as per customer requirement.
We supply (Garjun) Keruing plywood with 100% core (Garjun)Keriung, face and back (Garjun)Keriung 1220*2440 in thickness 6mm,9mm,12mm,15mm,18mm... Grade: AA/AA Both sides SANDED. Glue: Melamine and MR
We supply Film Faced Plywood ( Shuttering Plywood) with Original Dynea film red brown, brown film (40/128 grade), 30kg, densified Film Faced (15mm to 12mm),11 ply, 12mm thickness (+/- .5mm), 10-15times repetition, 72Hours WBP Glue (Phenol Formaldehyde). Hot press-40minute heating and cooling cycle. Rubber wood + Poly core: 30Kg: Rubber wood + Full core: 30Kg: Eucalyptus + Full core: 38Kg: Benefits: more usages, more load bearing, less scaffolding, save on labor cost. Origin: India, China
We supply high grade face veneer or core veneer. Wood species available: eucalyptus, acacia, poplar, keruing, okume, birch, pine etc. Our core veneer can be used for commercial grade plywood, film faced plywood, packing plywood. 1.Rotary cut : 1,270 x 640 x 1.0MM, OR 1.7mm 2.Sliced cut: 1270x Width 60mm upward , 0.45mm upwards 3.Thickness Tolerance: -0.03, + 0.05 4.Content Moisture: 18 % max 5.Drying process; Sundry or oven dry. 6.Cutting Process: Rotary Cutting/ Sliced cutting Grade A: 1. Full sheet of same color, no dead knot and small hole. No tear, No Joints 2. Whole piece (no joints) with live knots, limited dead knots, some small holes not more than 2cm in diameter. Also available in mix of grade A and B We can supply in following grade 1Grade A: 100% 2Grade A :90%+ Grade B:10% 3Grade B: 100%
We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.
Hollow Plastic Concrete Formwork for fundational building Size:1220*2440mm Thickness:15mm/18mm/20mm MOQ:100pcs Advantage:Reusable Application:concrete panels building formwork Color:Grey Weight:31kgs Quick Details: Product Name:Plastic concrete formwork Application:Concrete panels building formwork Material:PP plastic material Surface:Cleanly ,Glossy and smoothy Size: 1220*2440mm Thickness: 15mm, 18mm,20mm Type: Construction formwork Color: Grey Certificate: ISO9001:2008 Weight: 31KGS Packaging & Delivery Selling Units:Single item Single package size: 244X122X2.0 cm Single gross weight:31.0 kg Package Type:carton box packing onto wooden pallet Lead Time : Quantity(Piece)1 - 200201 - 336337 - 810>810 Est. Time(days)5715To be negotiated
Feature: Natural, Eco-friendly, Durable, Easy Clean, Waterproof, Logo Printing, Disposable, Sustainable, Stocked Origin: Vietnam. Size: Customizable as your requirements Usage: Restaurants, Hotels, Wholesale
Wood pellet pine , 6-8mm
We are Manufacturer , supply Albasia Falcata light wood ### Density approx 300kg/cbm ### It could be raw material to make pallets or ready to use pallets ### Also available Mix Hardwood ( MLH) Medium Light Hardwood for all kind of usage ***** all sizes available **** MOQ 54 m3 **** Payment simply by Bank transfer
We supply Albasia Falcata wood and other cheap Mix Hardwood for vary purposes *** Pallet - Barecore - Furniture component - Housing Component ### KD and Planer finished , S4S or E2E #### MOQ 50 m3
"Storage Type Containers Specification Spruce Log Shelf Life 5 years Manufacturer OWN Ingredients Carbon Content Organic Address Austria Instruction for use furnitures Place of Origin Austria Color Red Brand Name Beech Wood Logs"
We are global suppliers of quality Teakwood Logs, squares and lumbers. Teak wood is one of the highest quality available hardwoods today. Its natural properties make it resistant to weather variations. Exposure to sun and rain do not damage teak as they would damage other types of wood. Our teak wood, especially, comes from legal origin and high quality forest management. Logs They come from thinning and final cuts, sold with different specifications for the sawmills of the region and exported to the whole world. Logs can be used in the creation of rustic outdoor and indoor furniture, pillars, veneer and even masts of ships. After to be processed in a sawmill into planks and lumber can be applied for all kind of teak uses. After all, thanks to its high resistance to moisture, teak is widely used in shipbuilding. Lumber Sawn lumber is produced on its own sawmill, which allows us to offer saws cuts of different specifications, according to the customerâ??s needs. It is ideal for the manufacture of furniture, floorings, decks, wooden artifacts and decorative items in general. Squares The squares are produced in the sawmills with an internationally recognized liability standard. It is possible to find squares of teak being used in construction for doors, windows frames, in the composition of decks, floorings and fancy furniture. The high durability of teak wood provides an excellent cost-benefit to the final consumer. We equally have the following species of wood available... IROKO,SAPELLI,OKAN,AZOBE ,IROKO , TALI,FARO,MOVINGUI,BOSSE,AIELE,ZINGANA,EBENE,AYOUS,TEAK,WENGUE,KOSSIPO , ,
High Quality Africa Doussie / Tali / Azobe / Rosewood Logs Quick description The product of Rosewood logs Green weight (kg/m3) = 1100 - 1200 Specific gravity at 12% M.C. (kg/m3) MV12 = (heavy) 750 Volumetric swelling for 1% MC variation V% = (small) 0.44 Total tangential swelling T% = 4.6 Total radial swelling R% = 3.1 Crushing strength (N/mm2) C12 = 74* Static bending strength (N/mm2) F12 = 173* Modulus of elasticity (N/mm2) E12 = 13700* Diameter : average 80-90 cm Length: larger than 5.5 meter A. cuanzensis : MV12 = 850 ; C12 = 63 ; F12 = 153 ; E12 = 11300
Buy premium shavings and sawdust Softwood and hardwood chips available Material: 100% wood Supplied in packs of 20kg, 25kg, 30kg and as requested Color: natural color Size: as requested
We supply wooden boards and logs from our own farms, please contact us for more information
Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel. Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits. Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.
Materials: Pinus Eliots wood Humidity: 8% max. Calorie: 4200-4800 mj/kg Gray: 0.5% -0.6% max. Shape: Pelletized Color: light yellow/brown Diameter: 6mm Length: 15mm-30mm Internal density: 1100-1300kg/m3 min Apparent density: 792kg/m3 min
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.
We are engaged in offering excellent quality Door Hinges to our valuable clients. 1. 4"x3"x3" with 2ball bearing 2. Material: q235 ,ss201,ss304, ss316 3. Size:101.6x76.2x3mm Color available: Brushed Chrome, Stain Nickel, Yellow Zinc, Antique Brass, Bright Brass, Polished Brass, Polished Chrome, Dull Brass, Brushed Zinc, Oil Rubbed Bronze, Antique Nickel, Antique Bronze, Primed Coating White, Primed Coating Black, Primed Coating Gray, Golden Finish.
