Nut Bolt Spring Washer Plain Washer Suppliers and Manufacturers

Accessories are an indispensable part of the proper sandwich panel installation. In krs’s offer there is a wide range of different accessories that together make a whole assembling system. Using the krs’s dedicated flashings guarantees a long life of the building. Our qualified staff will help you to choose the proper flashings. Installation accessories fulfill several important functions. Metal flashings are required not only for improvement of final look of the building, but mainly for covering opened core edges as well as joints with windows, doors etc. Protection against wind, rain or snow is as important as adding a final touch to the esthetics. We prepared all of the accessories to fit to the panels both technically and optically. In krs’ offer we have several installation accessories: Fasteners (screws, fasteners, rivets, load distributors, etc.) Sealants (adhesive tapes, sealants, gaskets)

Fasteners with a tapered shank (self-tapping screws) chipboard screw & particle board screw Similar to a drywall screw except that it has a thinner shank and provides better resistance to pull-out in particle board, while offset against a lower shear strength. The threads on particle board screws are asymmetrical. concrete screw& Tapcons & masonry screw & confast screw & blue screw & self-tapping screw & Titen A stainless or carbon steel screw for fastening wood, metal, or other materials into concrete or masonry. Concrete screws are commonly blue in color, with or without corrosion coating. They may either have a Phillips flat head or a slotted hex washer head. Heads sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw. deck screw Similar to drywall screw except that it has improved corrosion resistance and is generally supplied in a larger gauge. Most deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface without breaking it. double ended screw & dowel screw & hanger bolt Similar to a wood screw but with two pointed ends and no head, used for making hidden joints between two pieces of wood. A hanger bolt has wood screw threads on one end and machine threads on the other. A hanger bolt is used when it is necessary to fasten a metal part to a wood surface. drive screw & hammer drive screw Chiefly used for attaching manufacturers data plates to equipment. Smooth round or mushroom headed with a multi-start thread on the shank, beneath which is reduced diameter shank that acts as a pilot. The screw is fastened by hitting the head with a hammer and is not intended for removal drywall screw Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter. eye screw & screw eye & vine eye Screw with a looped head. Larger ones are sometimes called lag eye screws. Designed to be used as attachment point, particularly for something that is hung from it. A vine eye (in the UK at least) is similar to a screw eye, except that it has a proportionally longer shank and smaller looped head. As the term suggests vine eyes are often used for attaching wire lines across the surface of buildings so that climbing plants can attach themselves.

Krs splendid plank – a perfect fibre cement plank for modern architecture Krs splendid plank is a unique composite of natural fibres bonded tightly in a high-grade silicate structure. This autoclaved, wood-grain and smooth siding plank acquires impressive toughness, yet remains flexible and dimensionally stable. It is cellulose cement plank that contains absolutely no asbestos fibre. Benefits of krs splendid plank Krs fibre cement planks weather resistant immune to water damage   fire resistant   not brittle   low shrinkage   bendable   high workability   termite resistant   non-asbestos Krs splendid plank achieves the beautiful aesthetic grooves on the building walls with the edged profile of splendid siding. Krs splendid plank is another version of lap siding with stand up the most demanding design. With krs splendid plank, ship-lapping installation is very simple and efficient. There are several designs of edge profiling available that not only provide innovative styles in for example home designs but also long lasting and less worry from humidity, heat, salt spray and flying debris. Primed planks can be coated before or after installation (double coating) with optional acrylic paint. Standard references

Specifications: 45/90, 45/100,50/105, 51/105, 55/110, 58/124, 60/125, 65/120, 65/132, 68/143, 70/140, 75/150, 80/143, 92/188 The compression ratio of the screw can be designed according to different products and mixtures. Nitrided Hardness: HV 900-1000 Nitrided Case Depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process

Parallel twin-screw and barrel used in extruder Specifications PX-45/2~150/2 Lenght/Diameter Ratio:L/D=18~25 The compression ratio of the screw can be designed according to different raw materials and products. Hardness hardness:HV800-1000 Nitrided Case Depth:0.45mm~0.7mm Alloy Hardness:HRC 50-65 Alloy Depth:0.8mm~2.0mm

Rubber pined screw and barrel specification: 75mm~+200mm Rubber cold or hot-feed screw and barrel specification: 30mm~+250 mm Nitrided Hardness: HV900-1000 Nitrided case depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy Depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process

This company produces the SJZS series cone-shape double screw rodplastic extruding machine, has forces to squeeze out, high grade, thecompatibility broad, the life long, the shear rate small, the materialis not easy to decompose, to mix builds up the plasticizing to be good, the powder material directly takes shape and so on the characteristic, provides the direct current velocity modulation, the temperature automatic control, installment and so on vacuum exhaust. Is suitable to product the and so on tube, board, different shapematerial production.

250~3200KN Mould Clamping Force, 30-25000g Shot Weight Diameter of screw: ¬ª20~¬+200 Screw can be mated with different heads, and barrel can be mated with different nozzles. Nitrided Hardness: HV900-1000 Nitrided case depth: 0.45mm-0.7mm Alloy hardness: HRC50-65 Alloy Depth: 0.8mm-2.0mm Materials: Quality 38CrMoAlA Advanced nitriding process Corrosion&Abrasion resistance bimetal spraying process

The bimetallic barrel for single screw is a kind of barrel moulding 2-3mm thick alloy coat on the barrel inner wall which has excellent corrosion resistance, abrasion resistance and high working temperature. And its useful service life is greatly improved contrast to the common nitrided cylinder. Bimetal has more obvious advantages when processing special plastics to enhance the abrasion life, such as engineering plastic, fluorine plastics, PPO and etc. The company product's single/twin screw, uses special alloy powders being sprayed and welded on the screw's ridge, and uses different alloys and welding methods for the screw of different functions. Materials: Quality 38CrMoAlA Quality power metallurgy raw materials

Barrel & screw for extruder Specifications: 15mm -0mm Length/Diameter Ratio: L/D=15-45 Screws can be selected from ordinary, gradual, mutational, pinned, shielding, separating and exhausting types. The compression ratio of screw can be designed according to different raw materials and requirements of clients.

Diameters: 5 MM to 100 MM or 3/16" to 4" Stock Range: Plain Washers, Square Washer, Spring Washer, Heavy Washer, Sample Drawing/As per customer requirements. Finish/Colours: Hot Dip Galvanized (HDG), Zinc Plated,Bright Finish, Golden Plated, Yellow passivation, Self/Black/ natural, Cadmium/ Tin Plated, Mechanical.

Spring Washers