Neck traction fixer Introduction of the Neck Traction Fixer: The DX-series of Neck traction Fixer is a new type neck tractor as a product of health care. This Neck Traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, Air Neck Traction Fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the Neck Traction Fixer: Our product is the Class I device, has got 3 exclusive patents (Invention Patent, New Practical Patent and Shape Patent) and is FDA certified product. The Necktraction Fixer has the ability to adjust to different diameters and heights. The diameter scope is from 8.9cm to 15.3cm. The heights scope is from 1cm to 24cm. The circumference of the Necktraction Fixer can adjust from 28cm to 48cm. The traction power can reach 80kg. The net weight of the Necktraction Fixer is 250g. Inner of the Necktraction Fixer is made from the rubber latex; the outside of the Necktraction Fixer is made from the cotton flannel. The linker and pneumatic bulb are made from the rubber latex. The person who always sits before the office table takes in the writing, or operating the computer or other work. And the driver always sits in the whole day. These persons have the pain neck disease or often feel fatigue in the neck area. Our products can help them reduce the pain and cure and prevent neck pain and fatigue, muscles spasms. There are two models as DX-A and DX-C. DX-A is that the Neck Traction Fixer without the magnets. DX-C is that the Neck Traction Fixer with the magnets. The differences between DX-A and DX-C: The appearance of the DX-C is same the DX-A. The difference is the magnets. Inside of the second layer there are three magnets, which is made by 1600 gauss magnet. The 3 points lie in respectively Fengchi pointf¼Fengfu pointf¼Fengchi point, which can stimulate the circulation of blood. On the surface of DX-C is the material of far infrared. The net weight of the each neck traction fixer is about 250g. Characteristic of use: A) Practical and Effective: Not only can be used inside and outside the room, but also can be sued in sitting, traveling and lying. Frequent use of the product would effectively aid the prevention and treatment of cervical spondylopathy; alleviate the fatigue in neck area. B) Convenient for carrying: a handy design for carry-on easy. C) Simple operation: it is portable and adjustable of angle and strength of traction by yourselves. D) Safety: this product causes no pain, risk used and any side effect if used in accordance with the instruction given. Beijing Daxiang New Material and Technology Co.
Neck traction fixer The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the neck traction fixer:
Neck traction fixer Introduction of the neck traction fixer: The dx-series of neck traction fixer is a new type neck tractor as a product of health care. This neck traction device elongates and exercises the neck and decreases the pressure between the discs. Frequent usage can promote better blood circulation and stress relief, air neck traction fixer system allows for deep neck muscle relaxation. The neck traction would assist to relief the tension, neck pain, muscles spasms, stress and pressure in the neck area. It is a product that combine the traction, fix, and magnetic cure and health care, especially helpful for the mid age and old age people and computer operators and officers who will feel uncomfortable in neck area after work or after standing, sitting, or walking all day. The net weight of the neck traction fixer is about 220g. The character of the neck traction fixer:
Theory: New plastic ring and innovative elastic string for medical use, insert the main ring onto the glans(over the glans and under the foreskin) to the corona groove,wind the spandex(elastic ring) around the sunken part of the ring,which blocks the blood flow to make foreskin necrotized. Traits: The product was authorized by Korean welfare ministry and it has improved the national health and welfare. Clinicians can easily do circumcision due to its easy and simple way with no incision, no suture and no pain. The wound is smooth and with non obvious scar after healing. The product is disposable, minimal invasion,under EO gas sterilization, very safe and cosmetic results without any danger of the second infection. There is no any negative impact to our daily life during the operation period. This new innovative device can be performed in the hospital,clinic or any health center based on correctly following the operation instructions. 20pcs/box, 12boxes/ctn CTN dimension for ault type, 45*30.5*20.5cm For child type, 36.5*25*17.5cm.
Power supply - 230v, 5amp Beaker - 1000ml Control unit 205mm x 156mm x 68mm weight - 650gms Load cell 150mm x 40mm weight - 750gms Urine flowmetry is essential diagnostic tool to a urologist as ecg is for cardiologist. Flow comp is digital gravimetric (
Minimum height - 800mm Maximum height - 1100 mm Funnel for urine flow Knee crunches for lithotomy position Pressure sensor bracket *advantages:- Filling and voiding is done in one sitting Can be used with “c” arm image intensifier. Fluorescent top and back to complete video urodynamics *features:- It is fluro compatible and extremely comfortable. Urinary tract can be examined under the “c” arm. Back rest movement from supine to sitting position can be arranged to a position of 70 degrees while sitting. 2. Patient’s frog leg position can be maintained while shifting from sitting to supine and vice versa. Upp test can be carried out at ease as all the required arrangements are attached to the chair itself. Pressure transducers are connected to the chair in very convenient positions. Mixture volume sensors are placed in a manner so as to measure leak point pressures.
etric uroflowmeter with convenience of use of turbine type uroflowmeter. Attendant is relieved from unwanted task of emptying the urine filled beaker. Easy flow sensor with valve. Control unit. Printer. Necessary piping and cables. Flush valves.
Two counting mode: whole blood & prediluted Patented aperture technology: automatic clog-clearing with high pressure and lower rate of clog Storage capability of up to 16000 sample results with histograms Automatic diluting, lyzing, mixing, rinsing Built-in thermal printer Bar code scanner ( optional) Reagent alarm system ( optional) Net weight: 19kg Gross weight: 22kg
Technology introduction the domestic leading checkup technology in vitro. the advanced international heating treatment and no trauma in vitro medicine-guiding technology. the traditional application technology, such as medical acupuncture treatment, massage , scraping , hammer treatment , cupping treatment. laser superconducting treatment technology Application: The disease of digestive systemre covered physical ther apynervous systembreathing system and gynecology.Menoprostate diseaseprostate proliferationurine-left symptom. The packing of therapy instrument should use wooden material as packing box.The therapy instruments should not be transported under the circumstances of shock, severe vibration, overweight and humidity.
0.5µl of blood 5 seconds measuring 300 memories 20 ~ 600 mg/dL ( 1.11 ~ 33.33 mmol/L) of measuring range 3V lithium Battery type Standard Set Blood glucose meter 10 pcs Strips & 10 pcs neddles Out color paper box Carrying bag.
Holter 7 Snap Leadwires 1.Cable material:TPU; 2.MOQ: 1 piece; 3.CE Approved. Sperate package, then put in outer box.
The following is the operation of the product 1, insert the used syinge needle to the destorye mouth. 2.Move the handle down to close the destroyer mouth and cut off the needle 3, move the handle up to open the destroyer mouth, now the needle has been destroyed, 4, move the handle to facilitate needle falling into the container The following is more detail information of our products: 10 units/ctn, 48cm*45cm*19cm, G/w:10kg/ctn
Spirotome The spirotome is a large core soft tissue biopsy system for the early detection and diagnosis of diseases, mainly cancer. The procedure is gently with no pain. The sample is of exquisite quality and the price per biopsy low. The procedure can be done in the operation theatre, physicians' office or elsewhere. Due to its direct frontal uptake of tissue the device is ideal for stereotactic procedures but working under ultrasound is the routine. The system works where other systems fail. The system is mri safe and conditional. Fda approval since 2006. Ce approval since 2005. One package contains one set of needles and measures 3 x 6 x 20 cm and weigths maximally 60 gram.
Portable & sleek model TFT display with 8.4ö colour active matrix ECG, NIBP, SpO2, Respiration, Temperature Built-in-rechargeable battery backup 72 hours trend data on screen Advanced digital signal processing to reject patient artifacts Anti-ESU (electro surgical unit) and defibrillator proof.
Our ECG Workstation is a kind of computerized 12 leads ECG; it applies computer technology to heart disease diagnosis and it has much stronger functions than traditional ECG machine such as save, print and manage patientsí» case history and so on.
Suction unit Instavac premium suction unit with shock proof abs chassis. Housing: robust engineering plastic molded, shock-resistant abs. Quality approval:isi marked Capacity: -710mmhg ª 10 at 30~35 ltrs / min. Noise level:50 db a ª 3 almost whispers Pump type: noiseless rotary vane type vacuum pump Jar: autoclavable 2x2 ltrs capacity, over flow safety device, reusable or autoclavable bacterial filter, pvc or silicone tube 10 x 15 mm x 2 mtrs. Vacuum gauge: 7.50 cms (3.0 inch). 0-760mm hg (also kpa) calibration. Power: 220/230v ac, 50hz, 180 watts, 1ph. (110v on request) Good for different clinical / medical & surgical procedures. All parts coming into contact with secretion are autoclave safe. Necessary tools for maintenance / replacement and spares provided. Export packing
CE and FDA certificates.
Detailed Product Description Power AC 220V 60Hz Power consumption 70W Grade 1st medical equipment Maximum output voltage 60Vp_p Maximum output current 30mA Fixed frequency 1~1000Hz Suction level 100,150,200mmHg Dimension 400*350*1100 Weight 40kgs
Jixi-h-10 medical ventilator Specifications: Power Red indicator Insp.Phase +/-0.1kpa green indicator Chargering Red indicator Exh.Phase Green indicator Low battery Red indicator Controls : Breath rate 10 15 20 25 30 35bpm I:e 2:1 1:1 1:1.5 1:2 1:2.5 1:3 Tidal volume 300 ~ 1000 ml. Physical specifications: W*d*h 380x120x240mm Weight 3kg. Electrical specifications: Ac voltage 110v~240v Dc voltage 12v Inlet battery£º12v , 2ah Pneumatic specifications: Oxygen iblet:pressurized oxygen(0.28~0.6 mpa medical oxygen). W*d*h 380x120x240mm Weight 3kg.
We provide designing, supply, installation and commissioning of the hospital equipment, operation theater equipment, medical instrumentation, surgical instruments , medical , pneumatic tube system, air disinfectant unit, gases pipeline system etc.