Iv Pump Set Continu Flo 10 Drops Ml Suppliers and Manufacturers

Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump tough to handle fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available. Single Stage Pump: This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration. Multi-Stage Pump: These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes. Wettable Housing Components: Cast Iron Cast Stainless Steel Fabricated Steel Fabricated Stainless Steel Stator: Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel Coupling Rod: Alloy Steel Stainless Steel Shaft: Alloy Steel Stainless Steel Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating Protective Coatings: Rubber Lining Epoxy Coatings Price Range: Rs. 25000 to Rs. 20 lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.

Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump â??tough â?? to â?? handleâ?? fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available. Single Stage Pump: This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration. Multi-Stage Pump: These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes. Wettable Housing Components: Cast Iron Cast Stainless Steel Fabricated Steel Fabricated Stainless Steel Stator: Natural Nitrile High Nitrile EPDM Chloro-Sulphonated Rubber Fluoroelastomer Aflas HNBR Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel Coupling Rod: Alloy Steel Stainless Steel Shaft: Alloy Steel Stainless Steel Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating Protective Coatings: Rubber Lining Epoxy Coatings Price Range: Rs. 25000 to Rs. 20 lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.

Qb series Applications and installation Qb series clean water pumps are high efficient household electric pumps, with the miniature heavy-duty electric motor and the peripheral pump couple directly. They do well in carrying clean water or the liquid whose physical and chemical nature similar to clean water, not exceeding They are ideal for household well water pumping, water injection supplying, car washing, and garden watering etc. Operating limitations Max ambient temperature up to 40 Max fluid temperature up to 80 Max pressure up to 10 bar Construction features Pump body: cast iron Motor housing: aluminum Shaft: 45# steel /stainless steel Impeller: brass Motor: closed, externally ventilated Insulation class: b/f Protection class: ip44/ip54 Duty: continuously rated Mechanical seal: ceramic steatite/ metalized carbon Thermal protector (if required)

4 flow range :0-200ml / min (without speed control circuit) 7 standard pump tube: inner diameter 2.5 * outside diameter 4.5 (mm) silicone tube (pump tube can be changed according to required flow rate ) 8 product weight: 85g 9 hole pitch for set-up: 47mm 10 pump head design is for easy disassembly, easy cleaning and maintenance 11 24 hours soak test is recommened for pump tube before the use of acid / alkali medium.

Peristaltic dosing pump ab12 1 applicable power: dc6v 2 working environment: temperature 0-40 ¡ã c, relative humidity

Plastic garden submersible pump Operating Condition: Fluid temperature up to 35 Centigrade Maximum ambient temperature 40 Centigrade. Maximun particale: 30mm for dirty water type Maximun particale: 5mm for clean water type Structural Charactristics: * External float switch for automatic pump operation. * Pump body made from fiber glass reinforced technopolymer, particularly to mechanical stress, knocks and corrosion, or stainless steel pump body. * Technopolymer open impeller. * Suction strainer made from fiber glass reinforced technopolymer, providing the support base for the pump. * Technopolymer hose joint with screw fitting. * C45 steel motor shaft. * Double seal carbon/aluminum on the pump side and sealing ring on the motor side. * Sealed induction motor, suitable for continuous duty with built-in thermal cutout relay (motor protector). * Insulation Class B (provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself) * Protection rating IP 68 * "H05/07 RN-F" Neoprene submersible supply cable. * Supplied standard with 10 meters of cable and plug. * Voltage and frequency available on request. * 220V/50Hz, 220V/60Hz, single phase * copper wire stator with thermal protector Insulation class B, Protection IP44, Continuous duty . Certification: 1. CCC Safety certificate 2. CE certificate 3. GS certificate. HS Code: 841381 Trademark: Haitaipump or OEM Standard: CE, GS Productivity: 50000PCS/Month Unit Price/Payment: T/T Origin: China Packing: 1PCS in 1 Box Min. Order: 300 PCS Transportation: by Sea Theory: Jet Pump Structure: Single-stage Pump Power: Electric Type: Jet Pump Export Markets: North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe.

3g series three screw pump It applies to deliver clean and non-corrosive medium which has lubricating property at temp blow 150 with the viscosity of 3-760cst. The pump working pressure range from 0.6mpa to 2.5mpa and flow rate range from 0.6m3/h to 123m3/h Feature Medium is delivered in axial direction continuously without agitation and pulsation Small vibration and low noise High pressure and high efficiency Simple structure, easy disassemble and assembly Small volume and light weight Slight wear and long life Materials: Driving and driven screw:16mncrs5, 40cr, 46, 38crmoal Pump body: ht200, qt450-10, zcusn10p1, zg270-500 Export standard case/plywood case

Infusion pump :znb-xd Launched in 1994, the first chinese-made infusion pump . m, low pressure Additional features: Real-time shift totals, automatic power switching, mute button, bolus, system malfunction Air-in-line detection: Ultrasonic detector Data interface port of infusion management system: Optional Power supply, ac: 110/230 vac, 50/60 hz, 20 va Battery :9.6+-1.6v, rechargeable Batterylife: 3 hours at the 30 ml/h Working temperature: 10-40 degree centigrade Relative humidity: 30-75% Atmospheric pressure: 700-1060 hpa Size: 174*126*215 mm Weight: 2.5 kg Safety classification: Class i, type bf International standard packing . Size :174*126*215mm Weight:2.5kg

Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:

CE certification oil pump 12v electric and 24v electric Characteristic: 1,DC oil pumps 2, small size, light and easy carrying 3, big flow and strong sucking 4, Vehicle battery driven,easy and quick 5, firmly and stable. Material 1, Pump body: stainless steel 2, Motor case: stainless steel 3, Filter material: Plastic(Nnylon) 4, Outlet: Plastic(Nnylon) 5, Impeller: PPO 6, Stator: magnetic steel 7, Coil: 100% copper 8, Seal: NBR 9, Battery Terminal: 2pcs ( copper plating) 10, Screw and nut; Cast Iron Description: CYB150 with DC 12V&24V is an high efficiency diesel pump with small size, big flow, high delivery head and vehicle battery driven for easy operation. It can work with diesel, machine oil and transformer oil (forbidden to work with easy explosive oil like gasoline etc.), suitable for small gas station and self filling for mobile machinery shop, trucker and etc. Notice: 1, voltage supply must be confirmed before cable connecting 2, Power supply: 12v/24v DC, +/-5% 3, A small quantity of liquid must be added in pump before pump first time be used 4, Connect the input and output pipe according to the arrow symbol on the pump 5, All the pump and connector must be well sealed and no air leakage 6, Not over 20min. in each single time continuous running

Model pz-9 mud pump is a horizontal triplex single acting piston pump which has the advanced structure and small in size. It has the reliable performance, good exchangeability, easy maintenance. The pump consists of two main sections: power end & fluid end. Power end includes pump case pinion shaft, crankshaft, back cover, connection rod, crosshead etc. Fluid end includes valve pot assembly, valves, cylinder liners, pistons, discharge manifold and suction manifold, etc. In order to prevent the water-hammer and reduce pressure difference in the outlet side, of the pump. The gears, bearings, crosshead in the power end adopt splash system and pressure lubrication system. This guarantees a good lubrication. The cylinder liners & the pistons in the fluid end is cleaned and cooled by a centrifugal spray pump with lubrication water. This pump has a complete set of special tools for general maintenance & repair. Technical specifications (1)type: horizontal triplex single acting piston pump. (2)rated input power 1000hp (3)rated speed: 130spm (4)stroke length 9"(228.6mm) (5)rated speed of pinion shaft 582 rpm (6)gear ratio: 4.48: 1 (7)valve standard: api7# (8)suction inlet 10" (9)discharge outlet 5 1/8" (5000psi) (10)overall dimension 205x94x100.5in (5200x2388x2550mm) (11)pump weight 44050 ib(20000kg)

Product name: Flue Gas Desulfurization Pump Model: Flue Gas Desulfurization Pump Application: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas Product overview Flue gas desulfurization pump Overview: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas desulfurization pump characteristics, absorb with similar products within and outside the advanced technology, well-developed The new generation of series desulfurization pumps. Dedicated to the absorption tower circulating pump PH: 2.5 to 13 chlorine ion concentration: ¹60000ppm weight concentration:¹60% Medium temperature: ¹100C. Absorber circulation pump is large FGD key equipment, means there is high demand for its reliability and service life. FGD means more than half of the power consumed for driving the absorber circulation pump. Therefore, the circulating pump should have a high efficiency. Hydraulic design of the pump design and selection of materials flow components directly related to the efficiency of the pump operation, reliability and service life. We developed the absorber circulation pump, pump, pump cover over-current parts are made of 2605N material, impeller, wear plate is used Cr30A material. Hydraulic design of the pump, drawing the French company J S phase flow pump design and manufacturing technology, and the use of modern CAD, CFD technical correction. Second, the flue gas desulfurization pumps structural features: (1) The pump is single-stage single-suction centrifugal pumps, which form in practice has proved to be particularly suitable for FGD absorber circulation pumping device abrasive, corrosive slurry. (2) The impeller, wear plate without using mouth ring seal in the form, set the port ring will be slurry rapid wear, leading to the rapid decline in the efficiency of the pump. (3) having an axial adjustment structure, the impeller can be easily adjusted to maintain an axial gap between the impeller and the wear plate and the front cover, so as to maintain the high efficiency of the pump. It is always easiest to maintain and the most effective and efficient way to pump operation. (4) is arranged in the form of pump is "pull" structure. This allows the pump impeller during disassembly, mechanical seals and shaft assembly without removing the inlet and outlet pipes. (5) bearing with thin oil lubrication. Bearing mounted on a rubber ring secondary seal removable bearing box, to prevent dirt and water from entering. (6) The shaft is a large diameter, short axis head can reduce shaft deflection at work, thus extending seal life. Third, the flue gas desulfurization pump design advantages: Overview: back pull-out design of the entire rotor assembly can be pulled from the motor, easy to maintain, the pump can remain in the pipeline, without removing the motor. 1. Front pull-out design wear plates, impellers, mechanical seal can be disassembled inlet end 2. bearing bracket can be adjusted to improve the wear resistance 3. The bearing lubrication oil immersion 4. Pump: pump pressure and wear of sufficient size, materials used 2605N, weldable, volute tongue wear some special treatment, tangential flow channel outlet, the body set foot supporting way. 5. Wear plates: the part is mounted between the pump and imported materials Cr30A, this material has excellent resistance to abrasion and erosion resistance, overall performance, thereby extending the life of the pump and impeller. 6. Impeller: material Cr30A, not welded, taking into account the long run is more economical, since the bearing holder can be adjusted when the situation abrasive wheel, the wheel can be re-processed and prolong life. Front blade structure prevents large particles rushed impeller and wear plate gap, the leading blade and wear plate gap, reducing the media (in impeller and wear plate) flow rate, reducing wear, special blades wear process design, back blade design, reduced axial force, but also to block large particles, high pressure bearing design (simulation without axial force hydraulic model back under the blade), the 7. impeller vent design, can be discharged within the gaseous medium, to prevent dry running mechanical seals. 8. After the pump cover: materials used 2605N, weldable, wear usually occurs in the back of the blade area, the pump head is mounted on the bearing bracket, release stress and allow greater wear and prolong the service life of the pump cover bolts fixed bearing frame for easy disassembly without the card and damage to the pump when dismantling the mechanical seal. 9. A bearing body: the bearing body consists of two parts, the carrier and the bearing housing, the bearing housing and the adjusting screw can be adjusted by means of bolts, move horizontally within the carriage. This has the advantage: in the bearing housing to move the carriage (reprocessing size according impeller), but the inner and outer bearing ring without relative displacement, since no relative displacement, seals fully functional. When removing the lower part of the reservation on the base for easy removal, position accuracy, the installation will not occur mutual jamming of parts. 10. Mechanical seal: The mechanical seal is designed to Single seal cartridge structure, easy disassembly. Wash design there are two options: one, loaded wash water pipe fixed wash water; of the two, without a fixed wash water line, segmental wash. In the mechanical seal the work area, if the medium containing gas, mechanical seals would run dry, so the impeller is designed with vents, you can avoid large, dirty particle contact mechanical seal. Easy emptying drainage pump seal cavity volume, full lubrication, cooling sufficiently. Flue Gas Desulfurization Pump

Tirrana Agricultural Range Capacities 360 LPM Pressures 120 Meter Built on heavy duty and proven platform, The Tirrana range of helical rotor pumps offers a peace of mind solution to all types of surface water transfer duties Material Options Wettable Housing Parts: Cast Iron Rotor: Stainless Steel 410, Hard chrome plated Stator: Natural, Nitrile Shaft and Coupling Rod: Stainless Steel 410** * Above material options are standard for Tirrana Range, contact Roto for other material requirement ** With gland packing, Shaft is Hard chrome plated under gland area. Applications: Ideal for tank filling or stock watering from dams, creeks, wells and rivers. Can handle clean water, brown water, dirty water with sand, silt or algae. Price range: Rs. 25000 to Rs. 10 Lacs* * Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.

Product Description IES Ideal End Suction Pump IES Series is single stage, single suction back pull out type Dimensions are according to EN733 (DIN24255) standard Flange can be drilled according to ISO, DIN, BS or ANSI standard Shaft with mechanical seal as standard and gland packing optional Materials available (Cast iron, Ductile iron and SS316 etc.) Performance Range Flow Rate (Q) Up to 1100 m3/h Head (H) Up to 152m Speed (RPM) 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ) Temperature -10 Celsius to 105 Celsius, (Optional 130 Celsius) Applications HVAC & Cooling Tower Fire Fighting Chemical Liquid Transfer Irrigation & Agriculture Booster & Pressurization Set Definition of Model IES 65/20 IES - Single Stage, End Suction Pump 65 - Discharge Diameter (mm) 20 - Impeller Nominal Diameter (mm)

NSQ submersible sludge pump is hydraulic machinery, the motor and the pump of which are coaxially submerged in medium to work. The overflowing parts of the pump are made from high alloy wear-resistant material, so the pump has good wear resistance and large flowing passage. It is applicable for conveying media such as sludge, ore slurry, coal slurry, sandstones containing big solid particles. The product is designed and manufactured by domestic and oversea advanced technologies. Besides the main impeller, the bottom of the pump is additionally provided with a set of agitation impeller which can spray the deposited sludge into turbulent flow, and therefore the pump realizes high-concentration conveying under the condition of no auxiliary device. The unique seal device can effectively balance the pressure inside and outside the oil chamber, so as to protect the reliability of the mechanical seal to the maximum extent. The motor adopts various protective measures such as overheat protection, water inle t detecting protection, and can operate safely for a long term in harsh working conditions. The pump is applicable for pumping sand for building, silty sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc. Structural Property 1.The whole machine is dry submersible pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities are effectively prevented from entering inner cavity of the motor. 2.Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out. 3.The trans-flux parts such as the impeller and the agitation impeller are made from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass. 4.The motor is submerged in water, is not limited by suction stroke, and has high sludge suction rate and thorough desilting. 5.The integral device is simplified, needs no auxiliary stirrer device or ejector device, and has simple and convenient operation and low total investment of the unit. 6.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium. Use Conditions 1 The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor. 2 The temperature of the medium cannot exceed 60íµ, and the medium does not contain inflammable or explosive gases. 3 The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%. 4 The submerged depth of the unit is not more than 20 meters, and the minimum submerged depth takes submerging of the motor as reference. 5 The unit works in the medium vertically, and the working status is continuous. Weight is 210KG.

DVB-C CompliantSD MPEG-2 Support Major CAS Embedded (Topreal ) SupportTV/Radio/Nvod Support Electronic Program Guide Function SupportMultilanguage Selection Automatic Loader Update Automatic Turn on/off by Timer Setting Channel Search in Automatic, Manual and Network Search Specification: Tuner Frequency Range: 47-858MHz Demodulator: 16qam, 32qam, 64qam, 128qam and 256qam Channel Bandwidth: 6 MHz / 8 MHz Input Impedance: 75 Video: Video Decoder: MPEG-2 MP@Ml Video Format: PAL / NTSC/ Video Resolution: 640,480I / 720,576I Audio: Audio Decoder: MPEG-1 Layer I/Ii Audio Mode: Mono, Dual Channel, Stereo Sampling Rate: 32 KHz, 44.1 KHz & 48 KHz CPU & Memory: CPU Frequency: 202MHz Flash Memory: 8 Mbytes RAM (Sdr): 32 Mbytes Rear Panel: RF Input: F/Iec Loop Though Output: F/Iec A/V Output: Y/Cb/Cr, S-Video, Cvbs, Left / Right Audio Digital Audio Output: S/ Pdif RF Modulator: F-Type Female Iec Serial Interface: RS 232. Weight: 1.8 Kg Power SupplyInput Voltage: AC 100-240v, 50/60Hz Power Consumption: Max 10 W.

1. All in one design,install and maintain conveniently. 2. water and electricity system is completely separated, assure using safely 3.the water temperature is set freely within 30-55 4.with magnesium nod inside. 5.Intelligent control 6.Compact design with 200L/250L/300L available for option 7. Stainless steel tank inside, plus 50mm insulation 8. Refrigerant R407c and R410a are available for option 9.Automatic defrosting function included. 10.Electrical heating element inside as back up for emergent request 11 Stainless steel or other colors cabinet for option 12.50HZ and 60HZ are both available 13. The tank is available to have pipe coil inside for the external heating source, such as heat pump, boiler or solar system. Heating Capacity 2.6KW COP 3.4 Certificates CE,CCC, ISO9001. Carton box or plywood

Hd dvb-s2, Twin scart , Led display optional, With usb pvr, With hdmi Fully dvb-s dvb-s2 compliant Mepg-4 mepg-2 mpeg4/h.264 hd/sd decoding (mp@hl/ml) Conversion between sd programs and hd programs High performance qpsk/8psk satellite tv receiver Automatic blind signal identification scan for all supported modes Lnb switching by 13/18v, 0/12v, 0/22khz Hdmi(up to 1080i) output Support epgú¼display present/ next tv program Support 7mhz & 8mhz software setting Pal & ntsc auto switch Support vbi&osd teletext, osd subtitle, lcn Lnb power & polarization: vertical: +13.5v, horisontal: +18v Max current: 500 ma with overload protection 22 khz tone frequency: 22 +/-4khz amplitude: 0.6 +/-0.2 v Diseqc: 1.0, 1.2, usals compatible Multi-languages System & memory: Main chipset: mstar 7828 Ddr2:2x512m bits Flash memory:8m bytes Power supply: Input voltage range: ac 90 vac ~ 240vac, 50hz~60hz Power consumption: max 7w Dvb-s2 tuner part: Front end: Dvb-s2 tuner sharp tuner Input frequency range: 950 to 2150 mhz Rf input signal level: -25 to -75 dbm Rf loop through function Dvb-s2 demodulation part: Demodulation ic:availink avl2108 Demodulation: qpsk and 8psk Symbol rates from 1msps to 45msps for all modes including 8psk modes Fec decoder code rates: Dvb-s2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Dvb-s: 1/2, 2/3, 3/4, 5/6, 7/8 Roll-off factors for pulse shaping, 0.2, 0.25, 0.35 Audio/video decoder: Video decoder:mpeg-2 (iso/iec 13818-2) Mpeg-4(iso/iec14496) H.264(iso/iec14496-10) Video resolution: 1920x1080i Aspect ratio: 4:3, 16:9 Audio decoding: mpeg/musicam layer 1, 2, mp3, mpeg-2, layerii mpeg-2 aac decode Audio mode 510*460*290mm, 30kg

IV Extension Set ICU 7 Inch Tubing Without Ports 29 mL Priming Volume UOM: 50/CS Product Number: 12517-01 Manufacturer: ICU Medical