This VWT-FFS-4372 Double Loop tunnel construction and its technology equipment are optimized for a professional use of sportsmen, army troop as well as general public and schools. Optimization of the fan can be performed on any other scenario of the use of the tunnel (like only sport tunnel utilization, or only to tourism utilization, military and special training purposes, or eventual their combination...). Optimization means a proper selection of tunnel dimensions, fans and engines parameters for proposed purposes to gain an optimal ratio between desired performance and operational costs. Dimensions and technical parameters of this tunnel offer the best conditions for the professional requirements on speed, space and height. Its size provides ample space for the entire training even of group formations of eight skydivers. Tunnel with 4,3 m of flying chamber diameter is the perfect place for training of army parachutes and special troops with their specific equipment. From tourist's point of view, the tunnel offers comfortable space even for flying couples with instructors or other smaller groups. Thanks to a comprehensive fan optimization the, tunnel allows operation of profi-flights as well as fun-flights at very low operation costs. Materials and Dimensions Air conductors in the aboveground part of the tunnel are made of sheet steel. All steel elements are provided with corrosion protection. Tunnel skin is made by sound-insulation panels KINGSPAN. Net dimensions of the tunnel are: width 30 m depth 10 m height 32 m The typical depth of foundation of ground concrete structure is 7,5 m. The typical height of the tunnel above the ground is 24 m. Flight chamber Flight chamber consists of a glass part, which is on its top connected to a steel construction of tunnel shell. Lower part of the flight chamber is purely cylindrical with a diameter of 4,3 m and a height of 5 m. The upper part of a flight chamber is made from steel and its height is 9 m. The shape of this part of flight chamber is gradually changing from a circular diameter of 4,3 meters to circular diameter 4,3 x 4,3 m. The overall maximum height of flight chamber 14 m The height of the glass part of flight chamber 5 m Diameter of flight chamber 4,3 m Maximum speed Maximum air speed at which the tunnel can be operated continuously is 80+ m/s (300+ km/h). Motors, fans and electronic equipment The air stream is formed by four vertically stored fans, each of 3.15 m in diameter, which are powered by a 4 electro-motors, each rated at 355 kW. RPM are controlled and regulated by 4 frequency changers from ABB. Control and monitoring system of the tunnel is realized using SIEMNS technology. Cooling Tunnel cooling is provided by an active cooling unit with a maximum power consumption of 330 kW, which corresponds to a maximum cooling performance of 1 000kW. Cooling compressor unit is located outside the tunnel and two pairs of optimized coolers installed in the tunnel design ensures a comfortable temperature in the flight chamber even during very warm summer period. During cold seasons, from the certain threshold temperature, the compressor unit is automatically switched to dry coolers, which maximize utilization of outside cold air and rapidly decrease the power consumption (up to 30 kW). -------------------- Offered price represents VWT-FFS-3672 /3.6m , double loop technology ,FOB Cz Praha 20x22ft containers
This inflatable lifejacket is designed and produced according to en396/a1:1998 and relative requirements of msc.81(70).It consists of one air chamber made of tpu nylon composite material, auto inflation device, co2 cylinder and oral tube.In emergent situation when falling into water, it can be inflated by the auto inflation device with five seconds or by manually pulling the toggle so as to ensure safety of the drowning people.It has the advantages of small size, light weight, comfort, easy use and it is suitable for offshore operation and personal protective device, type zhgqyt-0511 and type zhgqyt-0521 are ce approved by germanischer llyod ag . Weight =150n, inflation time
1 The tyres are placed in this curing chamber and the precured tread becomes adhered to the tyre through a vulcanizing process. 2 Using plc automation control system to control curing time, temperature , pressure, inflation and exhaust 3 curing methods:electrial heating, steam heating Capacity:16tires Weight:4200kg Power:50kw
Model: Inflatable Kayak (YHK-3) Length: 9'9" Width: 36" Weight: 33 lbs. Tube Diameter: 11" Thwart Diameter: 10.5" Number of Air Chambers: 4 Number of D-Rings: 1 Number of Handles: 2. 130x40x50cm.
Model: Inflatable Kayak (YHK-1) Length (cm): 405 Width (cm): 105 Side tube diameter (cm): 32 Air chambers: 2+1 Packed dimensions (cm): 70 ¡Á 53 ¡Á 32 Weight (kg): 25,5 . 130x50x60cm.
This inflatable banana boat has 5 air chambers, tube diameter 59(cm),long 510(cm), width 204cm, net weight 44.5(Kg), gross weight 49 (Kg) Packing size:76*76*38cm Accessories:1 set of foot pump,1 set of repair kit.
Rigid inflatable boat Over length : 660cm Tube diameter : 52cm Gross weight : 950kg Max passenger : 8 Floor type : double frp Net weight : 900kg Over width : 228cm Air chamber : 5 Max engine : 150hp Packing size : 580*180*150
(1) Soft bottom inflatable boat: UB270, UB300, UB330, UB380, UB430, UB470 (2) Rigid inflatable boat/rib boat: HYP300, HYP330, HYP420, HYP480, HYP520, HYP580, HYP620, HYP660,, HYP830 Rigid Inflatable Boat HYP430 Full length 4.3m Width 1.96m Inside length 0.48m Inside width 1.32m Tube diameter 0.45m Engine Shaft 20inch Air chamber No 4 Max Passengers 7 Max Loading880kg Recommend HP 40HP Hull weight 195kg QTY 20/40 6/12. Packing size(cm) 403*178*80.
CERTIFICATE: (1) Soft bottom inflatable boat: UB270, UB300, UB330, UB380, UB430, UB470 (2) Rigid inflatable boat/rib boat: HYP300, HYP330, HYP420, HYP480, HYP520, HYP580, HYP620, HYP660,, HYP830 Rigid Inflatable Boat HYP830 Full length 8.3m Width 300cm Inside length 810cm Inside width 170cm Tube diameter 52cm Engine Shaft 20 or 25 inch V shape degree 22¡ã Air chamber 8 Max Passengers 20 Max Loading2000kg Recommend HP 300HP Max speed ≥30kts Hull weight 1600kg.
Rib boat, rigid inflatable boat, inflatable dinghy, semi-rigid boat rescue boat, motor boat, , Full length 5.2m Full Width 2.2 m Inside width 1.19m Tube diameter 0.51m Engine Shaft 25inch V shape 20 degree Air chamber No 5 Max Passengers 10 Recommend HP 70HP Max speed ¡Ý 25kts Hull weight 315kg QTY 20/40 3/7pcs. QTY 20/40 container 3/7 pcs.
Rib boat, rigid inflatable boat, inflatable dinghy, semi-rigid boat rescue boat, motor boat, PVC boat, Full length 6.6m Full Width 2.7m Inside length 5.85 m Inside width 1.65m Tube diameter 0.52m Engine Shaft 25 inch V shape 20degree Air chamber No 6 Max Passengers 12 Max Loading 1664kg Recommend HP 150HP Max speed ¡Ý25 kts Hull weight 670kg.
Product Name: Eyson Double Air Chambers 150N/275N Inflatable Life Jacket SOLAS Product Features: 1. 80N, 110N, 150N 275N buoyancy optional 2. SOLAS Standard, Double Air Chambers 3. With Solar reflective tapes and whistle, easy to find in the wild 4. Lightweight and comfortable, adjustable webbings to fit different size 5. Reusable, easy for washing and air drying 6. For outdoor sport, water sport, fishing, marine work, life saving
Quick Details Place of Origin: China Brand Name: SHELTER Model Number: Inflatable Medical Tent Type: Tent Size: 5*5*2.8m (16.4*16.4*9ft) Product name: Inflatable Medical Tents /Disinfection Isolation Tent for Emergency Tent roof fabric: 750g Blockout white PVC Interior Lining: 260T oxford fabric Ground Sheet: 0.4mm PVC Double coated PVC fabric Working Pressure: 18~22Kpa Wind load: â?¤80km/h Features: Water proof, UV resistance, fire retardant(DIN4102,B1,M2) Accessories: Electrical Pump, Hammer, Nails, Ropes
Realon Air & Pneumatic Hose is reinforced with high tenacity yarn to meet the pressure requirement for General Construction Work, Road, Building , Tunneling, Metallic and Non-Metallic in Structural Shops with Chippling, Grinding and Revetting Appliances, Service Stations for Tyre Inflation for Pneumatic Tools used in industries and for connection to the Telephone, Shower, Hot Water Geyser, other Sanitary Fittings and D.C.P. Fire Extinguisher. Our transparent hose particularly 20 mm ID can be successfully used for Rock Drilling Applications
Detailed Product Description Manual & automatic inflatable life vest * 150N life vest * Inflate by 33g CO2 cylinder * CCS certificate * Portable & comfort Features: 1. One size fit all. 2. 33g CO2 cylinder. It can be used one time, you should replace another one next time 3. Construction:waterproof nylon with 33g co2 cylinder and single chamber 4. For swimming, fishing and saving life in port & river 5. Various of styles are available or as customers' request 6. Accessory: 2pcs reflective band and one rescue whistle 7. It can be hung your neck and tied to the waist so that keeps you and your child safe in water. Products index: 1. Flotage : 150N 2. Weight: 0.9kg 3. Inflatable forming time: 5s 4. Floating time: 24h 5. After 24h, buoyancy loss 5% 6. Product validity: 3 years.
Rigid inflatable boat hyp560 Over length : 560 cm Over width : 245 cm Tube diameter : 58 cm Air chamber : 5 Transom height : 52 cm Transom width : 108 cm Max passenger : 9 Max engine : 90 hp Max loading : 970 kg Floor type : double frp Gross weight : 350 kg. Packing size : 555*210*125 cm 20'/40 'container : 1/2pcs.
Inflatable Boat UB650-U Product Description Over Length : 650 cm Tube Diameter : 60 cm Gross Weight : 185 kg Max Passenger : 16 Packing Size : 80*80*45 Floor Type : Aluminum Net Weight : 175 kg Over Width : 230 cm Air Chamber : 7+1 Max Engine : 90 HP Max Loading : 1800 kg. Carton packing size : 80*80*45
Rigid inflatable boat hyp660 Over length : 660 cm Over width : 245 cm Tube diameter : 58 cm Air chamber : 5 Transom height : 52 cm Transom width : 182 cm Max passenger : 12 Max engine :150 hp Max loading : 1200 kg Floor type : double frp Gross weight : 600 kg Packing size : 655*270*105 cm 20'/40 'container : 0/2pcs 3 year warranty. Carton
Ts-series is the most versatile boat we design and manufacture. With classic angular bow, it could be used for fishing, diving, yacht tending and ideal for spontaneous weekend trips as well. Constructed of heavy duty pvc with 3- 5 chambers for safety and stability. An inflatable keel creates a v-bottom shaped hull that tracks well, provides better steering control, and allows for wave jumping. Easy to assemble and disassemble.CE certified. 129*72*37 Weight 80kg Max loading 650kg
Model: Inflatable raft (YHR-1) Length: 13' Width: 6' Weight: 92 lbs Frame Width: 54" Max Frame Length: 68" Tube Diameter: 18" Thwart Diameter: 11" Number of Thwarts: 2 Center Compartment: 36" W x 44" L KickRocker (BowStern): 30" Number of Air Chambers: 7 Number of D-Rings: 12 Number of Handles: 4 Material : PVC or Hyplaon. 136x60x45cm.
