Features 1.Intelligent and digital led(light-emitting ) timer 2.1~8 channels, programmable and arbitrary combination and arbitrary output 3.Memory storage (10years) / mechanical life 4.Panel mounting 5.Delay time unit:0.1s/1s/1min(option) 6.Power supply (220v ac 50/60hz) 7.Input:transistor 8.100 groups of programme/time periods
1.New high-speed MCU chip with great speed 2.Big capacity of program and stable and reliable operation 3.Accomplishes the control of time-segment, sequential-segment and the program 4.Built-in 100 time relays 5.Be used in programmable fountain, programmable lights, sewerage, water supply, irrigation, bag pulse dust, electric boiler heating, street lights, neon light, water purifier,electric valve (solenoid valve)timing mud, grit removal control and so on. 6.The 220V/1A DC or AC load. 7.16/8-channel output
We offer BC Brand JRC-071M Subminiature Hermetically Sealed Relay. ENVIRONMENTAL CONDITIONS: Temperature Range: -65~+125C Relative Humidity: 40 C at 95% Atmospheric Pressure: 86~106kPa,Low Pressure 4.4 kPa Shock: 490m/s2 Vibration: 10~2000Hz, 196m/s2 Liner Acceleration: 490m/s2 TECHNICAL DATA: Contact Arrangement: 4 Form C (4PDT) Coil Voltage: DC Coil Dissipation: 0.9W Insulation Resistance: 1000Mohms Dielectric Withstanding Voltage: 500V r.m.s. Contact Resistance: 0.10ohms Operate Time: 8ms Release Time: 5ms Contact Load : 2A/28VDC(Resistive) Life: 1 x 104 Operations Leakage:1 x 10-1 Pa.cm3 /s Dimensions: (L x W x H) 21 x 11 x 11.5mm Weight: 11g . Ordering Information: JRC-071M/ 027 - 0 1 1 2 3 4 . 1. Model 2. Part No.(Coil Voltage) 3. Mounting Type 4. Terminals .
ENVIRONMENTAL CONDETIONS: Temperature Range: -55~+85 C Relative Humidity: Up to 98% at +40 C Atmospheric pressure: 86kPa~106kPa, Low pressure 4 kPa Vibration: 10~2000Hz, 196 m/s2 Shock: 735m/s2 Acceleration: 490 m/s2. TECHNICAL REQUIREMENTS: Rated Voltage: 12VDC, 18VDC, 24VDC, 27VDC Insulation Resistance: 1000Mohm Dieletric Withstanding Voltage: (RMS/50Hz) 500V Contact Resistance: 0.1ohm Rated Load: 2A28VDC, 4A28VDC Life: 1x105: 1x105 / 2x104 Contact Form: 2C(DPDT); Time Delay: 0.05~500s(Nonadjustable) Outline Dimensions: 20.5 x 10.5 x 15mm Weight: 13g .
Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure:86~106kPa,Low pressure 4.4kPa Shock: 490m/s2 Vibration: 10~500Hz,98m/s2 Liner Acceleration: 245 m/s2.
ENVIRONMENTAL CONDITIONS: Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure: 86~106kPa, Low pressure 4.4kPa Shock: 117.6m/s2 Vibration: 500Hz,58.8m/s2 Liner Acceleration: 147 m/s2. TECHNICAL DATA: Contact Arrangement: 6 Form C (6PDT) Coil Voltage: 12~27VDC Coil Dissipation: 2.5W Insulation Resistance: 500Mohms Dielectric Withstanding Voltage (RMS/50Hz): 500Vr.m.s. Contact Rresistance: 0.05ohms Operate Time: 8ms Release Time: 4ms; Contact Ratings: 2A27VDC Resistive Electrical Life: 1 x10 5 Operations Leakage Rate: 1 x 10 0 Pa.cm3 /s Dimensions: + 31 x 34 mm Weight: 75g Approved by Standards: QZJ840617 .
CONTACT RATINGS: Contact Arrangement: 1 Form A (SPST-NO) Max. Switching Power: 1200VA / 300W Max. Switching Voltage: 120VAC / 30VDC Max. Switching Current: 10A Contact Resistance: 100mOHMS Initial Contact Resistance: 100mOHMS Rating Load: 5A250VAC,30VDC Contact Material: Ag-CdO. TECHNICAL REQUIREMENTS: Coil Source:DC Coil Dissipation:1H1:0.45W; 1H1L:0.2W Insulation Resistance:100MOHMS Dielectric Withstanding Voltage (RMS/50Hz) 750VAC(between contacts) 3000VAC(between coil and contacts) Electrical Life:1x10 5 Operations Mechanical Life:1x10 7 Operations Contact Form:1A(SPST) Operate Time:10ms Release Time:2ms Outline dimensions:18.2mm x 10.5mm x 15mm Weight:9g Approved standard:UL,CUL(E151736),TUV,CQC. ENVIRONMEN , TAL CONDITIONS: Temperature Range:-40~+85C Relative Humidity:Up to 45~85% at +20C Atmospheric Pressure:86~106kPa Vibration:10~55Hz Dual Amplitude 1.5mm Shock:98m/s2 Operating Position:Optional .
A reed switch consists of two ferromagnetic and specially shaped contact blades (reeds) positioned in a hermetically glass tube with a gap between them and in a protective atmosphere. The plated contact surfaces are isolated from the outside environment, which protects the contacts from contamination. Reed switches are available as form a (normally open) and form c (changeover), and are operated using a magnetic field generated by either a permanent magnet or current carrying coil. The features that make the reed switch a valuable tool include compact size, low weight, quick response time, long life and low cost. Some common applications are: reed relays, automotive sensors, robotics sensors, security sensors and toys and games. They are also available in moulded packages affording protection from damage and in surface mount styles. 8x6x5, 1#
Key Specifications / Special Features Operating voltage:
Introduction Standard Meter test offers test of internal standard power &automatic calibration. Clamp inputs and direct inputs are at usersí» option when it comes to external input. Possess two functions of Faults Recorder and Faults Replay. And the two functions mentioned above can serve field technicians to analyze the faults concerned. Possess Remote Diagnosis which allows users to monitor the output state of meters by Internet from remote places. The running state of the machine can be identified by error comparison of sample values against data output of remote data acquisition instrument. Capable of testing all types of voltage relays, current relays, frequency relays, power relays, impedance relays, harmonics relays, differential relays and synchronism Check relays by manual or by automation. Fault Simulation calibrates nominal values of distance protection device and zero-sequence protection device. And fault simulations also lead to distance relay test of distance protection device and zero-sequence protection device. And K2066 can auto-scan the ratio braking curve of differential protection in microcomputer and digital transformer as well as Generator-transformer Group. And K2066 possesses GPS Synchronizer. The installation of particular heating radiator contributes to the safety of K2066 There are four high-power ventilating fans inside the Host. Thermal-shutdown is adopted to ensure the excellent stability & reliability of the amplifier even under long-playing working state along with high current. Current generator provides the function of open-circuit protection and open-circuit alert in itself. While Voltage generator possesses the functions of short-circuit protection, of output testing against waveform distortion, of Auto-recognition & Auto-alarming & Self-lock protection against wrong wiring as well as the function of Dynamic Waveform Monitor& Display. Possess isolated output contacts, and the same case for idle contacts and electric potential contacts; and well adapt to various wiring installation. Possess 7-channels voltage output; That one optional channel can works as auxiliary power supply by setting software shall make it easier for site-commissioning. Possess well-structured offline running function, the Host has independent output of 7 voltages & 6 currents of which amplitude, phase and frequency are continuously adjustable at usersí» option. And large LCD screen 640*480 is installed and its interface display is legible in English version. Internal design is architectural style framework and high intensity aluminum alloy box of which vibration & shock resistance enables the equipment subject to strict vibration. With the application of the latest DSP and large-scale programmable components FPGA from TI Company in United States as well as 1448-dot waveform simulation, K2066 possesses better Transient Response and better Amplitude-frequency Characteristic. Besides, at present KINGSIN stands as the exclusive manufacturer in China who initiates the application of 20-digit serial port DA to further improve the output precision. Weight:24 KG Dimensions 420ú¿Dú¬í-140 (W)í-360 (H) mm
Introductionú¦ 1. Advanced SCM control system enables K3030 system to run steadily. 2. Simple internal design also contributes to steady system running 3. 1448 points waveform fitting is for every cycle, reaching the leading position at home, as has significantly improved the amplitude-frequency Characteristic and voltage-current transient/instantaneous response for the system, with the current transient response of 20 ª¦s. And the transient voltage response of 30 ª¦s, obviously exceeds the China national standard (200 ª¦s). Excellent transient response can be more suitable for the development trend of the new rapid digital type protection relay. 4. 20-digit serial D/A Converter is adopted, and the serial D/A Converter has better linearity and precision than the parallel D/A, greatly increasing the precision of voltage and current signal. 5. 40-220V/0.6A auxiliary DC power supply is under control of software, the power supply can individually provide working power to the protection device or other equipments. Ripple coefficient is less than 0.1% and accuracy is 0.5% Remarkú¦ 1.During the test, amplitude value, phase and frequency are continuously and arbitrarily adjustable with simple operation. Be able to test various types of AC/DC voltage relay, AC/DC current relay, frequency relay, power relay, impedance relay, harmonic relay, differential relay and synchronism relay about operate time and operate value by manual or by machine;Faults-Simulation enables users to calibrate fixed values of distance protection device and zero-sequence protection device. And fault simulations also lead to distance relay test of distance protection device and zero-sequence protection device. And K3066 can auto-scan the ratio restraint curve of differential protection in microcomputer and digital transformer as well as Generator-transformer Set. 2.The installation of particular heating radiator contributes to the reliable practicability of K3030.There are four high-power ventilating fans inside the Host. Thermal-shutdown is adopted to ensure the excellent stability & reliability of the amplifier even under long-playing working state along with high current. Current generator provides the function of open-circuit protection and open-circuit alert in itself. While Voltage generator possesses the functions of short-circuit protection, of output testing against waveform distortion, of Auto-recognition & Auto-alarming & Self-lock protection against misconnecting as well as the function of Dynamic Waveform Monitor&Display.. 3.Possess isolated input contacts, and the same case for idle contacts and electric potential contacts; and well adapt to various wiring installation. 4.Four voltage output channel, of which one channel is set as auxiliary DC supply by software, making it more convenient for field debugging. 5.Internal design is of architectural style framework and of shock & impact resistance external box made of high intensity aluminum alloy enables the equipment subject to rigid vibration 6.Be able to work as DC generator to provide Relay Protection Device with DC Voltage Generator(0í¡220V) 7.Direct edition on test report when using PC, and that scanning graph can be added into test report is useful for report analysis. Weight:24KG Dimensions:420ú¿Dú¬í-140 (W)í-360 (H) mm
JR28(LR2-D) series thermal relay is suitable for using in the main circuits rated voltage up to 660V,rated current 93 A, AC 50Hz or 60Hz,for over-voltage protection of AC motor. The relay has the differential mechanism and temperature compensation and can plug in CJX2(LC1-D) series AC contactor, also be independently fixed. Specifications: LR2-D13, D23,D33
JRS1(LR1-D) series thermal relay is suitable for using in the circuits rated voltage up to 600V,rated current 93A.AC 50Hz or 60Hz for over-voltage protection of AC motorú«The relay has the differential mechanism and temperature compensation and can plug in CJX2(LC1-D) series AC contactor, also be independtly fixedú« Specification: LR1-D09, D40,D63,D80 Rated voltage: 220, 380, 415, 440, 660V Rated current: 0. 1~0. 16, 0. 16~0. 25, 0. 25~0. 40, 0. 40~0. 63, 0. 63~1, 1~1. 6, 1. 6~2. 5, 2. 5~4, 4~6, 5. 5~8, 7~10, 10~13, 13~18, 18~25, 23~32, 30~40, 38~50, 48~57, 57~66, 63~80A
JRS2(3UA) series thermal overload relay are suitable for overload and phase-failure protection of AC motors with frequency of 50/60Hz,voltage up to 690-1000v,current up to 0.1-400A under 8-hours duty or uninterrupted duty. Several functions provided by these relays are: phase-failure protection, temperature compensation, ON/OFF indication and manual/automatic reset. The relays can be mounted onto contactors or installed as single units.
GSM BASED RELAY ON/OFF SWITCH 1 CHANNEL TO 4 CHANNEL Remote control using a MOBILE phone from anywhere in the world! - New Feature - Schedule Timer Added The GSM BASED RELAY ON/OFF SWITCH 1 CHANNEL TO 4 CHANNEL is a GSM remote control switch, it connects to the cell phone network and like a cell phone has its own cell phone number. The GSM switch is activated by Sending SMS to its cell phone number, it has 1 TO 4 independent relay switches with normally open and normally closed switch contacts, these can be programmed to switch on and Off By Sending SMS A1 B1 C1 -A0 B0 C0 ..... . SMS text message command. It can report the relay status by sending back a text message. Applications Specification â?¢ Operating Voltage - 12VAC/ DC 2 Amps â?¢ SIM card any Network SPECIFICATION : POWER INPUT: 12v DC-2 Amps RELAY: 250v 7A, 24 10A LIGHT INDICATION: FIRST LED: RED- POWER LIGHT SECOND LED: GREEN â?? BLINK 2 SECONDS ONCE GSM CONNECTED TO NETWORK RELAY ON CORRESPONDING LED WILL GLOWGSM BASED RELAY ON/OFF SWITCH 1 CHANNEL TO 4 CHANNEL Remote control using a MOBILE phone from anywhere in the world! - New Feature - Schedule Timer Added Specification â?¢ Operating Voltage - 12VAC/ DC 2 Amps â?¢ SIM card any Network SPECIFICATION : POWER INPUT: 12v DC-2 Amps RELAY: 250v 7A, 24 10A LIGHT INDICATION: FIRST LED: RED- POWER LIGHT SECOND LED: GREEN BLINK 2 SECONDS ONCE GSM CONNECTED TO NETWORK RELAY ON CORRESPONDING LED WILL GLOW
4 channel power distribution for H51X, H51q for extension rack F-BASE RACK 11 inclusive miniature fuse 5x20, 4 A-T, H
Manufacturer:Panasonic Product category:Low signal relays - pcb Rohs:Rohs compliant by exemption Brand:Panasonic industrial devices Product:Slim form relays Contact form:Dpdt (2 form c) Contact current rating:1 a Coil voltage:12 v Maximum switching current:1 a Coil current:11.7 ma Coil type:Non-latching Power consumption:140 mw Contact rating:1 a at 30 vdc / 300 ma at 125 vac Contact termination:Solder pin Mounting style:Through hole Packaging:Tube Factory pack quantity:50 Search:
Product category:General purpose relays Rohs:Rohs compliant compliant Product:Power relays Type:Slim form Mounting style:Through hole Contact form:Spst (1 form a) Contact current rating:5 a, 7 a Switching voltage:250 vac, 30 vdc Coil voltage:24 vdc Coil type:Latching Coil resistance:2.88 kohms Coil current:8.3 ma Contact material:Silver alloy Brand:Omron electronics Height:15.3 mm Length:20.5 mm Maximum switching current:5 a, 7 a Packaging:Bulk Power consumption:200 mw Series:G5nb-el Width:7.2 mm
Flyin Optronics Coarse wavelength division multiplexer (CWDM Mux/Demux) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path. Channel Spacing CWDM Gird Number of Channels 4 8 16 18 N Configuration Mux Demux OADM Fiber Type Bare fiber 900um loose tube 2mm cable 3mm cable Fiber Length 1m 2m Specify Connector None FC/APC FC/PC SC/APC SC/PC ST LC Specify Multi-Number of Channels 1270nm1290nm1310nm1330nm1350nm1370nm1390nm1410nm1430nm1450nm1470nm1490nm1510nm1530nm1550nm1570nm1590nm1610nmSpecify Features Applications Low Insertion Loss Line monitoring Wide pass band WDM network High channel Telecommunication High stability and reliability Cellular application Epoxy free on optical path Fiber optical amplifier Access network Performance Specifications Parameter 4 Channel 8 Channel 16 Channel 18 Channel Mux Demux Mux Demux Mux Demux Mux Demux Channel Wavelength nm 1270~1610 or 1271~1611 Center wavelength Accuracy (nm) ±0.5 Channel Spacing nm 20 Channel Passband (@-0.5dB bandwidth (nm) ±7.5/ ±6.5 Insertion Loss dB 1.5 2.5 3.5 3.5 Channel Uniformity dB 0.6 1.0 1.5 1.5 Channel Ripple dB 0.3 Isolation dB Adjacent 30 Non-adjacent 40 Isolation dB Express with filter 30 Express without filter 12 Insertion Loss Temperature Sensitivity(dB/)
8 channel solid state relay module with base with fuse I/P 3VDC O/P 12V To 480VAC 3 A with led indication