Egekilde Citrus 24X330Ml Can Suppliers and Manufacturers

Although pine oil can cause allergic reactions, it is very useful to relieve mental, physical, while having a cleansing and clearing effect on a room. Even though it can be used in cystitis, hepatitis and prostate problems, as well as to improve circulation and to relieve rheumatism, gout, sciatica and arthritis, it should be done so with care due to the sensitizing nature of this oil. Oil properties Pine oil has a fresh forest smell, is pale yellow in color and watery in viscosity.

Lavender oil is an essential oil obtained by distillation from the flower spikes of certain species of lavender. Our lavender essential oil is produced from flowers growing in higher elevations of Bulgaria. The oil has a fresh, soft and sweet aroma. Lavender is indigenous to mountainous regions of the Mediterranean countries and the black sea, gowning best in the poor, well-drained soils. Lavender oil, which has long been used in the production of perfume, can also be used in aromatherapy. It has a calming and regenerating effect over the human body. Lavender oil can be used as an antiseptic and pain reliever to be applied to minor burns and insect bites and stings.

Rose water is made using damask roses, many-petaled and fragrant. These were first grown in Iran and Bulgaria, but are now frequently found in Spain, Italy, and France. The uses of rose water are as varied and numerous as the petals of a damask rose. Most western countries are familiar with rose water or rose oil as an addition to fragrances and in body and facial creams. Commercial preparations come in many forms and can safeguard against bacterial formation. In addition, the buyer can choose organic preparations, thus eliminating pesticides from the roses in their food or on their bodies. However used, rose water is certainly almost universally enjoyed, with its sweet and deep aroma, and delightful and unusual taste.

The health benefits of Lavandin Essential Oil can be attributed to its properties as an antidepressant, antiseptic, analgesic, cicatrisant, expectorant, nervine, and vulnerary substance. The Lavandin, plant from which this essential oil is obtained, is not a natural plant in the true sense because it was born as a result of the hybridization of two plants with the scientific names Lavandula Angustifolia and Lavandula Latifolia. That is why Lavandin is scientifically known as Lavandula Hybrida and Lavandula Hortensis. The aroma and medicinal properties of Lavandin are quite similar to those of Lavender, but they are more intense and sharp since it is a hybrid. The main components of this oil are Lavandulol, Linalool, Linalyl Acetate, Camphor, Cineole, Caryophyllene, Camphene, Dipentene, Limonene, Ocimene, and Terpinene. Lavandin oil boosts self-esteem, confidence, hope, and mental strength, while efficiently fighting depression. This can be very helpful to drive away depression for those who are suffering from depression due to a failure in their career or personal relationships, insecurity, loneliness, stagnation, someoneâ??s death, or for any other reason. This also relieves anxiety. As an antidepressant, it can be systematically administered to patients with acute depression who are undergoing rehabilitation

Rose petals are edible and a traditional ingredient in the foods in the middle east, especially in desserts. In addition to sprinkling rose water on desserts, it is sprinkled on guests as a sign of welcome before the meal. Rose petal jam and cordial are still popular in Europe. Rose hips are a rich source of vitamin c and can be made into a conserve or jam. The petals are then eaten as a candy or used to decorate desserts. Roses are used for excess menstrual bleeding, digestive problems, gonorrhoea, and for liver symptoms. Delicious medicinal preparations can be made from rose petals, including syrup of roses, honey of roses, sugar of roses, rose water, and vinegar of roses. Rose petals have been used for conditions such as fevers, headache, jaundice, joint pain, fainting, weakness, trembling of the heart, poor digestion, and infection.

The chamomile water is steam distilled from fresh blossoms of bulgarian chamomilla during the months of may and june of each year. It is a completely natural product for skin and hair application. 100% pure and natural product. Chamomile floral water soothing and relaxing effect on the human body. Ideal as a facial or hair toner and for soothing irritated skin. Chamomile floral water is so mild it is ideal for use on babies. It can be added to bath water or used as a calming bedding / pillow spray.

Juniper bushes can be found in eastern Europe, Bulgaria, Hungary, also in western Europe France and Spain and in north America - Canada. This evergreen shrub grows up to 6 metres tall. It has dark green or blue needles and small flowers and berries. The berries change colour over the first few years of growth. They start off green, but after a year or two, they turn black. Juniper is used to flavour food and drink and is the characteristic aroma in gin.

Rose absolute oil, Rosa damascena, is known best for its sensuous and intense sweet and floral fragrance. Bulgarian rose is suitable for all skin types and is a cell rejuvenator, an antiseptic, and a anti-inflammatory. Used in skin creams and lotions to soothe and heal various skin conditions, cuts, burns and to reduce swelling. Can be inhaled by asthmatics, and it relieves a variety of female problems including menstrual cramps and pms symptoms. Sniffing the oil or using rose as a massage oil has been suggested to reverse impotency, but it's more likely to be used by women to lessen moodiness during menopause. The scent is definitely an aphrodisiac and is used to relieve stress and depression.

Salvia essential oil ( or sage essential oil) is great for relieving grief and quickening the senses, while stimulating the lymphatic system and helping with female problems, such as sterility and menopausal problems and on the skin it not only helps healing but also to reduce pore size. Oil properties Salvia oil has a sharp, herbal smell, and is watery in viscosity. Origin of salvia oil It is an evergreen perennial herb that can grow up to about 60cm ( 2 feet) high with a woody base, soft grey-green oval leaves and a mass of blue or violet flowers. The Chinese believed that it cured sterility, while the romans believed it cured just about everything.

Rose Damascena flower water may be used as face clean toner. Rose water Improves skin water balance.The contect of Rose oil into Rose water (around 0,06%) acts as a disinfectant and antibacterial ,so Rose water can be used to: -disinfection in skin irritations, redness, insect bites It cleanses, tones and gives a youthful appearance to each skin type while preserving the natural hydro-balance in the epidermis. Regular use of rose water in the form of tonic and face cleanser regulates the production of sebum and soothes and regenerates irritated skin. It has antibacterial action. Applied externally to inflammatory processes, acne, skin redness, eczema and itchy skin. Suitable for baby skin. -Aromatherapy uses its relaxing and soothing effect by placing it in a aromatherapy bath, in the bath, or spraying through a spray in the room. The fresh scent refreshes the spirit and harmonizes the mind. It has a toning and restoring effect, it brings a sense of romance.

Rose oils are extracted from the Rosa damascena (Bulgarian) and Rosa centifolia (Moroccan) also known as 'rose de mai'. Rose Otto is the essential oil steam distilled from fresh roses. Rose concrete a solvent extraction of fresh roses. Rose absolute is extracted from the rose concrete using alcohol. Rose Otto is distilled from the Bulgarian rose or Rosa damscena. The Otto is an almost clear pale yellow liquid. When it is very cold it solidifies but it is easily warmed to liquid again. Rose Otto smells rich, floral, warm and spicy with honey undertones. The smell of fresh roses becomes more apparent at when the Otto is diluted. Rose Otto is the most expensive extract of roses. Rose concrete from Rosa damscena is a deep orange colored mass of a jam-like consistency, can be greenish yellow.

Ready to eat anchovy

Canned Tuna and Sardines. 125 Gramm, 185 Gramm, 400 Gramm, 1000 Gramm Indonesia Origin Are famous in taste and different flavor .

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details