Horizontal directional drilling xz680a Horizontal directional drilling Product description 1.Closed loops, hydraulic pilot control, load sensing control help to save energy and operate flexibly. 2.The gear and rack transmission makes stability and reliability, double floating patented technology for power head and vice is to improve service life of rods thread. 3.Elastic equilibrium release technology is to avoid device damaging when pulling pipeline back, which increase the reliability. 4.Mud flux stepless speed regulation saves mud and reduce pollution. 5.Cabs 45 ,rotation enhances comfortable operation. Projectunitparameter Engine Type-cummins 6ctaa8.9-c325 Rated powerkw/r/min239/2200 Thrust-pull Max thrust-pull forcekn725 Thrust-pull speedm/min32 Rotation Torquen.M31000 Max spindle speedr/min110 Mud pump Max flow ratel/min600 Max pressurem pa10 Pipemmxm�102x6 Loader crane Lifting weightt2 Loading capacityt.M4 Max inclination angle, �18 Max backreamer diametermm�1000 Weightt21 Dimensionmm11610x2475x3115 Remark:-optional, semi-automatic pipe loader
Rotary Piling Rig XR360 Hydraulic Piling Rig Product Description It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability. The imported Cummins turbo-supercharged engine is powerful, and has sufficient power reserve. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability. The oil cylinder and sleeve-driven functions are available for selection to satisfy various needs of the users. Normal mode and entering-rock mode of unit head are available for operation in soil and rock to improve the construction efficiency. It is equipped with a centralized lubrication system as standard configuration; maintenance is easy.
Rotary piling rig xr180dii Product description Features It adopts dedicated hydraulic retractable crawler chassis and heavy slewing bearing and has high stability; It adopts the front-located single-rope main winch structure to greatly prolong the service life of steel wire rope and lower the use cost; Cummins electric control turbo-supercharged engine is used. It complies with euro iii emission standard , in addition, it has strong power, which is sufficient to satisfy the construction on the plateau. Its noise is up to the national standard; Using full electronic control technology of can bus, improves the reliability of the whole vehicle and simplify hydraulic line, fully reflects the people, machine, electricity and liquid integration; Winch-crowd and sleeve-driven functions are available for selection to , �cfa, hydraulic casing oscillator, dth hammer satisfy various needs of the users; It is equipped with a centralized lubrication system as standard configuration; maintenance is easier; The machine obtains c e certfication of t, v rheinland group. Enginemodelc ummins qsb6.7-c260 Rated powerkw194 Rotary drivemax. Output torquekn . M180 Rotary speedr/min6~33 Max. Drilling diametermmï¿ 1600 Max. Drilling depthm60 Crowd , �cylindermax. Pull-down piston pushkn, �160 Max. Pull-down piston pullkn, �180 Max. Pull-down piston stokem, �5 Crowd winchmax. Pull-down piston pushkn210 Max. Pull-down piston pullkn210 Max. Pull-down piston stokem13 Main winchmax. Pulling forcekn180 Max. Line speedm/min65 Auxiliary winchmax. Pulling forcekn50 Max. Line speedm/min70 Mast rake side/forwards/backwards, �3, �/5, �/15, � Undercarriagemax. Traveling speedkm/h1.5 Max. Grade ability%35 Min. Clearancemm350 Track shoe widthmm700 Distance between tracksmm2960~4200 Hydraulic systemworking pressurempa35 Overall drilling weightt63 Dimensionworking conditionmm8350x4200x20480 Transportation conditionmm14380x3000x3490
Horizontal directional drill hdd xz200 Horizontal directional drilling Trenchless machinery, Product description 1.Hydraulic pilot control, provide comfortable operating performance and flexible regulation, first-class brand of hydraulic components to ensure the reliabil ity of the machine hydraulic system. 2.Carriage and clamp use double floating patented technology can greatly protect the drill pipe thread, increase the service life of the drill pipe. 3.High-speed sliding systems, piston motor to achieve high and low sliding speed of carriage, increasing the ability to adapt the machine working conditions, promote construction efficiency. 4.Stable chassis support, using the classical h type beam structure, quality rubber track, frog outrigger, provides a strong guarantee for the stability of construction 5.Support the diverse needs of customers, the machine can option configuration with the automatic (semi-automatic) drill pipe handling device, automatic anchoring system, cab, air conditioning wind, cold start, freezing mud, mud washing, mud throttling and other devices, can also be optioned more eco saving , cummins with eu stage , ?a. Parameters: Projectunitparameter Engine Type, , -cummins 6btaa5.9-c150 Rated powerkw/r/min112/2200 Thrust-pull Max thrust-pull forcekn225 Thrust pull-speedm/min26 Rotation Torquen, m6350 Max spindle speedr/min160 Mud pump Max flow ratel/min250 Max pressurempa8 Pipemmxm?603 Loader crane Lifting weightt- Loading capacityt, m- Max inclination angle, 22 Max backreamer diametermm?600 Weightt8.5 Dimensionmm5900x2020x2400 Remark, -optional:i.Cab;ii air condition;iii. Full automatic pipeloader;iv. Semi-automatic pipeloader;v. Single automatic anchor vi. Dual automatic anchor vii. Mud antifreeze; viii.Mud cleaning; ix. Automatic thread oil daub x. Piston pump hydraulic system.
Soilmec r622 Soilmec used equipment Product description Engine: newly change deutz Hydraulic system: newly made sealing Working hours: around 17000 hrs Year of manufacture: 2003 Soilmec r518 Product description Product details: Soilmec r518 hydraulic drilling rig Manufacturing date: march, 200 2 Working hours: 18000 hours Country of origin: italy ïspecifications: ï Torque: ï126, 000 lbft-ft (172 knm) Max depth: 36m(interlocking kelly bar), 62m(friction kelly bar) Max. Diameter:ï6 ft. (1800 mm) Crowd pressure:ï195 kn Tower height:ï70 ft
Rotary Piling Rig 280DII Rotary Piling Rig XR320 Rotary Piling Rig Product Description The special hydraulic chassis for the rotating drill with extensible crawler is provided with the excellent stability and is convenient to transport. The complete machine has passed CE certification of TV Rheinland group. The imported Cummins turbo-supercharged engine is powerful, and has sufficient power reserve. The machine adapt single row rope for main winch to figure out the wear of steel rope. extend the life-span. And high reliability . Optional configuration according to customers' requirement, E.g: Crowd winch, Outrigger cylinder, Sleeve-driven and so on. The rotary drive can switch from Nromal Mode, Rock Mode and Energy-Saving Mode, the user can select a corresponding mode of th e rotary drive according to the specific working conditions, which can greatly improve the working efficiency and low the fuel consumption. It is equipped with a centralized lubrication system as standard configuration to provide more convenient maintenance and make the machine a good reliability . Engine,Model,,CUMMINS QSM11-C400 ,Rated power,kW,298 Rotary drive,Max. Output torque,KN . m,280 ,Rotary speed,r/min,6~22 Max. Drilling diameter,mm,ï¿ 2200 Max. Drilling depth,m,88 Crowd �cylinder,Max. Pull-down piston push,kN�,210 ,Max. Pull-down piston pull,kN�,220 ,Max. Pull-down piston stoke,m�,6 Crowd winch,Max. Pull-down piston push,kN,300 ,Max. Pull-down piston pull,kN,300 ,Max. Pull-down piston stoke,m,16 Main winch,Max. Pulling force,kN,260 ,Max. Line speed,m/min,60 Auxiliary winch,Max. Pulling force,kN,80 ,Max. Line speed,m/min,65 Mast rake side/forwards/backwards,,�4�/5�/15� Undercarriage,Max. Traveling speed,Km/h,1.5 ,Max. Grade ability,%,35 ,Min. clearance,mm,445 ,Track shoe width,mm,800 ,Distance between tracks,mm,3500~4800 Hydraulic system,Working pressure,Mpa,32 Overall drilling weight,t,96 Dimension,Working condition,mm,10770x4800x23550 ,Transportation condition,mm,17410x3500x3520
Horizontal Directional Drilling Xz400 , trenchless Machinery Product Description 1.High-power Engine System, Strong Power. It Is Adopted Turbine Engine Which Power Is 179kw. The Powerful Engine Is Enough And Insures There Is Enough Power For Drill In Different Working Conditions. 2.Rack And Pinion Sliding, To Ensure The Stability Of The Carriage And The Reliability Of Drive Operational. Power Head Floating. 3.Carriage And Clamp Use Double Floating Patented Technology Can Greatly Protect The Drill Pipe Thread, Increase The Service Life Of The Drill Pipe. 4.High-speed Sliding And Rotation Systems, Variable Motor To Achieve High And Low Power Head Sliding Change, Increasing The Ability To Adapt The Drilling Rig Working Conditions, Improve The Efficiency Of The Drilling Rig Construction. 5.Support The Diverse Needs Of Customers, The Machine Can Be Increased With The Automatic (semi-automatic) Drill Pipe Handling Device, Automatic Anchoring System, Cab, Air Conditioning Wind, Cold Start, Freezing Mud, Mud Washing, Mud Throttling And Other Devices. Project, Unit, Parameter Engine Type, -, Cummins 6ctaa8.3-c240 Rated Power, Kw/r/min, 179/2200 Thrust-pull Max Thrust-pull Force, Kn, 400 Thrust-pull Speed, M/min, 21 Rotation Torque, N.M, 14000 Max Spindle Speed, R/min, 104 Mud Pump Max Flow Rate, L/min, 450 Max Pressure, M Pa, 8 Pipe, Mmxm, ?833 Loader Crane Lifting Weight, T, - Loading Capacity, T, m, - Max Inclination Angle, , , 23 Max Backreamer Diameter, Mm, ?900 Weight, T, 11.5 Dimension, Mm, 7080x2450x2450 Remark:, -, Optional.Semi-automatic Pipeloader;, ?.Single Automatic Anchor;, ?.Dual Automatic Anchor;, ?.Mud Antifreeze;, ?.Mud Cleaning.
The equipment adopt the wheel type chassis, can be transported with drill rod, ,made the transportation easily economically. Cummins electronic control turbo supercharged engine meeting Euro III emission standard, saving energy, evironmental protection and strong power; The patented parallelogram articulated structure actuailizes a wide work range. The highly strengthened box-type steel structure design makes the mast of highly-rightly and anticontored, therefore the drill accuracy is heightened.
19.Horizontal Directional Drill XZ320E Horizontal Directional Drilling Machine Horizontal Directional Drilling Machine China Product Description 1.Hydraulic pilot control, provide comfortable operating performance and flexible regulation, first-class brand of hydraulic components to ensure the reliability of the machine hydraulic system. 2.Carriage and clamp use double floating patented technology can greatly protect the drill pipe thread, increase the service life of the drill pipe. 3.High-speed sliding systems, Piston Motor to achieve high and low sliding speed of carriage, increasing the ability to adapt the machine working conditions, promote construction efficiency.
Horizontal Directional Drilling Machine Horizontal Directional Drilling Machine Supplier Product Description 1.High-power engine system, strong power. It is adopted turbine engine which power is 153kW. The powerful engine is enough and insures there is enough power for drill in different working conditions. 2.Rack and pinion sliding, to ensure the stability of the carriage and the reliability of drive operational. 3.Carriage and clamp use double floating patented technology can greatly protect the drill pipe thread, increase the service life of the drill pipe. 4.High-speed sliding and rotation systems, variable motor to achieve high and low power head sliding change, increasing the ability to adapt the drilling rig working conditions, improve the efficiency of the drilling rig construction. 5. Support the diverse needs of customers, the machine can be increased with the automatic (semi-automatic) drill pipe handling device, automatic anchoring system, cab, air conditioning wind, cold start, freezing mud, mud washing, mud throttling and other devices.
Technical: Model:GTR82D170 Operating weight :90kg Shoe size(W*L):mm:285*340 Impact force :15KN Percussion rate max:640-680 blows/min Jumping stroke mm:50-80 Packing size mm:570*510*1100 Engine manufacture:HONDA Engine output:4.2hp Wooden case
Construction / Earthquake Resistant Equipment
Product Application It is a unique machinery designed for internal wall plastering. Its automation instead of traditional manual plastering and professional finishing clear your worries behind. EZ-mini-500 is an ideal rendering machine for small, big and wide areas, such as store, warehouse, bathroom, bedroom etc. Application: brick wall, block wall, cement wall, internal wall, concrete wall, house, building, skyscraper, villa, construction etc Applied materials: cement, gypsum, lime, ready mix, perlite, clay etc.
Hardware Building Materials..Import.
ITEM JS4500/3000 Feeding Volume(L) 4500 Discharging Volume(L) 3000 Motor power (KW) 2×55 Qty. of mixing paddle 9 Weight (Kg) 9800 Discharging mode Hydraulic discharging Dimensions under working condition (mm) 3465×3215×2220 Dimensions under transportation condition (mm) 3465×2575×2220
Batch Type EPS Pre-expander PRODUCT DESCRIPTION Batch type EPS Pre-expander Features: 1.Resin Hopper Capacity for different capacities 2.Fluid Bed Dryer with heater 3.Transfer blower for bead 4.Resin filling blower 5.Pefect sealing and chamber pressure stabilizing ,highly efficient heat transition, energy saving up to 50% comparing to continual type EPS pre-expander. standard export packaging
EPS Recycling System PRODUCT DESCRIPTION EPS (Expanded Polystyrene ) recycling machine In the EPS production, sometimes we¡¡¡ê¡èll leave some wasted EPS. By EPS recycling system, the recycled EPS, material can be reused in shape moulding production in a ratio of at least 10-20 percent without any perceptibly optical or physical change of the product quality. For block moulding 20-50 percent or more can be added. If the production capacity is not very big, we can use mini EPS recycling system as solution. In the recycling process, we usually use EPS mixer, EPS de-duster and EPS crusher. standard export packaging
Aluminum products, building and decoration materials, chemicals and additives, smart products, telescopic handles, tent poles, smart lock, automatic clothes drying racks, aluminum tube.
Product Performance: 1. The forming method adopts the combination of vibration and hydraulic pressure, and the product density is high. 2. The cloth making machine adopts multi-row axis compulsory fabric mode, with fast and even cloth speed; The vibrator is oil - immersed vibrator with stable and reliable quality. 3. In the production process, only the main motor is in the working state for a long time, saving energy and saving electricity. 4. The feeding machine, board feeding machine, upper mould and lower mould of this machine are all driven by the hydraulic system and run smoothly. 6.Multi - purpose machine, by changing the mold can produce different specifications of products.
Product Performance: 1. The forming method adopts the combination of vibration and hydraulic pressure, and the product density is high. 2. The cloth making machine adopts multi-row axis compulsory fabric mode, with fast and even cloth speed; The vibrator is oil - immersed vibrator with stable and reliable quality. 3. In the production process, only the main motor is in the working state for a long time, saving energy and saving electricity. 4. The feeding machine, board feeding machine, upper mould and lower mould of this machine are all driven by the hydraulic system and run smoothly. 6.Multi - purpose machine, by changing the mold can produce different specifications of products.
