Designed on the basis of accurate data from finite element analysis and dynamics simulation analysis, the boom system has a scientific structure and excellent performance. Besides, stress and strain tests are conducted by the national test center to verify the agreement between the calculation and analysis result of the boom structure and its actual working condition. Another longer boom placer is 39m concrete pump.
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:80m/h; Max output pressure:16MPa; Motor power:195KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:6770*2060*2500mm Weight:7200kg
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:80/h; Max output pressure:13MPa; Motor power:118KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:6770*2060*2500mm Weight:7100kg
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:80m/h; Max output pressure:16MPa; Motor power:132KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:6440*2060*2150mm Weight:6500kg
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:80m/h; Max output pressure:13MPa; Motor power:110KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:6440*2060*2150mm Weight:6400kg
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:74m/h; Max output pressure:13MPa; Motor power:90KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:6440*2060*2150mm Weight:6300kg
Key Features: 1.Real power for high rise and long distance concrete coneying,versatile and inexpensive solution. 2.S-transfer tube enables continuous concrete conveying and a quite delivery line at high pressure. 3.Patented pump swiching technology based on full two-way plug-in directional valves.less pulsing and long service lift. 4.Special design to achieve a high suction efficiency. 5.Low maintenance and less prone to wear and tear. 6.Efficient lubrication system to ensure long-time continuous operation. 7.Convenient one-button switching between high-and low-pressure operations 8.Intelligent electronic control system regulates the engine to the perfect speed to minimize fuel consumption,ear and noise. Max flow rate:40m�³/h; Max output pressure:8MPa; Motor power:75KW Suitable concrete specification:slump:8-23better, aggregate size:16-20cm, Dimension:4860*1830*2000mm Weight:4500kg
The Best Features of the Concrete Pump: 1 .Stability: Special hydraulic system with double pumps and double circuits: compared with single pump double circuits, the pumping system and distributing system are driven bytwo independent pumps that allow a more stable oil flow rate to the pumping unit. Intelligent control system: advanced technology, easy operation and high reliability electrical system. 2.High efficiency: Hopper:High Suction Capacity due to Large Angle Fluent Hopper Design with less feed accumulation area. Svalve: well designed S valve ensures the smooth flow of concrete. Rapid concrete piston substitution: the pistons can be changed easily by a single operator without any special tools in 15minutes. The hydraulic cylinder has anextra stroke to allow the piston to extend from the concrete cylinder. 3.Energy saving: Low running costs. Hydraulic oil treatment: equipped with multistage fine filtration and water separation devices, to extend hydraulic components lifetime and reduce oil changes. Super wear~resistant component: special steel alloy made spectacles wear plate andcutting ring plus high wear~resistant cast steel material made mixing blade,ensuring a longer lifetime of weary spare parts. Hydraulic Low / High Pressure Mode Shifting: high/low pressure working mode is easily selected at the press of a button for variable heights of pumping.
Sewage Pump - B
Inline Pressure Pump
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Butyl rubber, sbr 1502, 1712, epdm, epm , nbr 35l ,br ,ssbr ,sbs ,eva and pva.
PRODUCT DESCRIPTION Features: Specially developed premium hose for conveying concrete using concrete pumps. Suitable for conveying highly abrasive media such as concrete, cement and plaster. Long service life due to abrasion resistant tube. Flexible and easy to handle, with good kink resistance due to a special hose design. Suitable for reverse pumping, for easy cleaning. Temperature range: -35°C / +80°C Safety factor 2:1 Tube: NR/SBR/BR, black, smooth, antistatic, abrasion resistant Reinforcement: Steel cord wrapped Cover: SBR, black, antistatic, cloth impression
60mâ³/h diesel type trailer mounted concrete pump Power type: diesel Theo.Delivery pressure: 13 mpa Theo.Concrete output: 60mâ³/h Engine rated power: 130 kw Taian sinotep machinery co., ltd could manufacture all kinds of concrete pumps such as small models with capacity 15, 20, 25, 30m3/h, medium models with capacity 40, 50m3/h, large models with capacity 60, 80, 90m3/h. All the models could be driven by electric motor or diesel engine. It is widely used in pumping mortar, fine stone concrete, normal concrete, high performance concrete in small, medium and large construction projects such as building, tunnel, bridge, high way, hydro-power, mining and national defense etc. Features of sinotep diesel trailer mounted concrete pump hbts60-13-130r 1 compact structure, easily moved, highly movable and flexible 2 intelligent power control system with plc for safe, smooth and efficient operation 3 plunger pump with constant power, ensuring the efficiency of main engine 4 equipped with wire remote controller, easy to operate 5 high performance sealing of s pipe valve installed with floating wear resistant ring 6 high delivery pressure to meet demand of high building and long distance projects 7 low cost maintenance, beautiful appearances 8 automatic lubrication system, ensuring efficiency and saving time
Ginger, cocoa butter, rubber, palm kernel oil, textiles and garments.
Concrete pump weld pipe sk125/5.5" 4.5mm 85bar Location: st52 concrete pump pipe Type:weld;pipe Material: st52 Inside diameter: 125mm Outside diameter:133mm Thickness:4.5mm Working pressure: 85bar- 130bar
Concrete pump s tube, concrete pump s pipe, concrete pump s valve and s valve assembly for putzmeister, sany, zoomlion, kyokuto, xcmg, hold, sermac, cifa, shotcrete pump etc
