Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are counted amongst the leading names of the company that is into offering Iron Ore. The products offered by us are of very fine quality. These products have rich content of iron as a result the users get relatively high amount of iron. Our products are very easily enriched as a result our clients save their precious time and money. We supply Iron Ore in different types- Iron Ore Lumps (Hematite & Magnetite) Iron Ore Fines (Hematite & Magnetite)
Iron ores are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. The iron is usually found in the form of Mangnetie (Fe3O4, 72.4% Fe) hematite (Fe2O3 69.9%) goethite ((FeO(OH), 62.9% Fe) Limonite (FeO(OH) n(H2O) 55% Fe) siderite (FeCO3, 48.2%, Fe) Ores containing very high quantities of hematite or magnetite, typically greater than about 60% iron, are known as natural ore or direct shipping ore, and can be fed directly into iron-marking blast furnaces. Iron ore is the raw material used to make pig iron which is one of the main raw materials to make steel 98% of the mined iron ore is used to make steel. In 2011 the Finacial Times quoted Christopher LaFemina, mining analyst at Barclays Capital, saying that iron ore is " More integral to the global economy than any other commodity except perhaps oil". MOQ 25,000 Supplied from Oman
We specialize in leather jackets, leather bags, belts, wallets, and hard goods. leather bags, clutches, backpacks, duffle bags, traveling bags, messenger bags, hobo bags, shoulder bags, handbags, designer bags, leather belts, leather wallets, footwear, safety shoes, and leather accessories. high quality jeans, shirts, t shirts, hoodies, and sweatshirts. our product range is further expanded by our home decor collection, which includes decorative glass, marble handicrafts, christmas decorations, bamboo crafts, wall art, wooden articles, art & antiques, flower pots, ceramic handicrafts, bar handicrafts, iron handicrafts, and wooden handicrafts.Import and export
Iron castings
Quick information Brand name: saibomplace of origin: china Description About out cast iron fence ornaments : We supply kinds of cast iron ornaments more than 10 years in china, our cast iron products including cast iron spears, cast iron collars, cast iron panels, cast iron baluster, cast iron spiral stairs and so on, with best quality and lower price. Cast iron ornaments models: We have more than 400 kinds of cast iron fence ornaments, also we can make fence ornaments according to your samples.
Used rail, aluminum ingot, copper cathode, Zinc Ingots, sugar ic45, lng, lpg, en590, espo, diesel fuel, lco, bitumen, petroleum coke, sulphur, sulfur, silicon manganese, bauxite, iron ore, copper ore, aluminum scrap, copper scrap, organic fertilizer, butyl tube.
Covid-19 Self Test Kit We are the authorized first vendor of ADTech! KFDA CE approved, FDA Pending Price : Negotiable Pre-Clinical Test Report Accuracy - In total samples 93.3% (14/15) - In positive samples 91.7% (11/12) 1. Pre-Clinical Test summary 1) Pre-clinical test is fulfilled by Domestic large clinical laboratory with ADTech COVID-19 IgM/IgG RAPID KIT 2) Tests are made by total 15 samples with 12 positive and 3 negative samples 3) Clinical Laboratory tested the sample with Immunofluorescence Analysis 2. Pre-clinical test result 1) Samples were tested by ADTech COVID-19 IgM/IgG RAPID KIT 2) Test result by ADTechs RAPID KIT - 4 negatives and 11 positives results in 15 samples 3) Comparison between Immunofluorescence analysis and ADTechs RAPID KIT - 14 test results are same(including negative and positive results) - 1 samples test result are different(Positive Negative by ADTech
Iron Ore Specs : Variable FeO 16.28 % Hierro Total 64.02 % SiO2 4.03 % AhO3 0.24% s 0.07% p 0.04 % CaO 1.34 % MnO 0.00%, PbO 0.00 % MgO 0.00 % ZnO 0.00%, TiO2 0.00% As 0.00 % Cu 0.02 % K2O 0.00% Origin Mexico Minimum monthly shipment 100,000MT CFR terms only (Maximum quantity of 200,000MT per month is possible) Annual contract only The price shall be quoted against firm inquiry. Payment: 90% by DLC / MT700 Nontransferrable and confirmed and payable at sight (Loading port) after SGS for quality and quantity. Balance 10% shall be against discharge port inspection at the discharge port in China Sellers performed shipments in the past ( during 2019 prior Covid period ). This offer is valid for a limited period and the response to queries shall be only through email so long as inquiries are received with KYC of the buyer/end user.
Can supply: PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade. Post industrial. Materials are bulk. Can load bulk in 1x40' Open Top container approx. 20-24 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
Fly ash, granulated iron blast furnace slag (gbfs), potassium feldspar , sodium feldspar , stpp sodium tripolyphosphate, zirconium silicates & zirconium flours.
Cerium oxide, chrome flour, carbon, coke powder, red iron oxide, cobalt oxide, aluminum oxide, nickel oxide, lithium carbonate.
Cast iron scrap available for immediate export