Aluminum Honeycomb Panel Aluminum honeycomb panel are mainly used in outdoor wall decoration of the building, which adopt the high quality imported raw material with processing precise size. The surface using advanced pre-roll coating fluorocarbon technology can be kept three years without discoloration. The company used sub-component and two-component epoxy-modified epoxy film, fully enclosed dust-free operation by using automatic honeycomb composite panel production equipment high-temperature composite made by strengthening make more bonded aluminum honeycomb panels solid, more flexible bending, plate straighter, more reliable quality. According to architectural design requirements arc board, folding panels and trapezoidal shaped panels and other kinds of honeycomb panels, all arc-, L-, U- shaped non-planar disposable plates are shaped by the mold, the dame item only using the dame batch roller coating aluminum coil, no color phenomenon. Is a kind of high-quality, lightweight, high strength, appearance opulent green decorative material.
www.alubuildtek.com Alu Build is a top service provider of facade engineering who has highly dedicated and professional team. Alu Build in house design Department develops detailed engineering drawings for precision cutting of ACP sheets and glazing for structural calculations. Our services are extended to Residential, Commercial and office works. Custom systems
Aluminium composite panel Wooden aluminium composite panel is one of the most popular aluminium composite panel in the world, which vividly imitate the wood texture, simple but nature. It is the perfect combination of wood natural beauty and excellent properties of aluminium wall cladding. For now, wooden acp is an ideal material for building facade in the construction material market. Due to the concept of natural and environmental protection, wooden acp is widely used in indoor and outdoor decoration, which has a tendency to replace the wood gradually. Features: 1)colorfastness, anti-corrosion & wear-resistance 2)easy to maintenance, clean with water directly if any dust 3)recyclable & eco-friendly construction materials 4)long service life, no need to waxing for protection periodically like other wood products Application: 1) constructional exterior curtain walls, wall panel are widely used in exhibition, stores, offices, banks, hotels, restaurants and apartments 2) indoors decoration for interior wall, ceiling, bathroom, kitchen, balcony , partition 3) old building renovation decoration usage 4) wallboard and ceilings for tunnels 5) material used for vehicle bodies, yachts and boat and subway
Specificatins: Panel thickness: 2-6mm Aluminum cil thickness: 0.10mm-0.30mm Width: 1250mm - 1500mm Length: 2500mm, nt exceeds 6400mm Prcessing: Surface: smth alu-cil with PE cating/PVDF cating Cre: excellent nntxic plyethylene Rear: rdinary cating fr prtectin Functin: Extremely strng agglutinatin, macrmlecule film Excellent rigidity and impact resistance Acid-resistant and alkali-resistant Light weight, easy t installatin Easy t clean and maintenance Usage: Match any cmmercial r residential interir decratin. Widely used in ceiling, flr, bathrm, kitchen, cabinet, tunnel, subway, billbards, exhibitins, salns, car, bat decratin, and mre.
1Standard size:Thickness (T):3mm,4mm,5mm,6mm,7mm,8mm 2Width (W):1220mm,1250mm 3Length(L): as the seller's option 4Film coating : PVDF,PE 6Plastic materials: PE a) Front: aluminum alloy sheet coated with polyester resin (PE) roasting painting b) Core: nontoxic polyethylene c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting coating
Product Name :Aluminium Composite Panel Standard size 1220*2440*3mm and 1220*2440*4mm Accepted Width Max:1500mm Accepted Length Max:6000mm Accepted Thickness:2mm,3mm,4mm,5mmm,6mm Aluminum alloy thickness :0.10mm 0.15mm 0.18mm 0.21mm 0.25mm 0.3mm 0.35mm 0.40m 0.45mm 0.50mm Weight: 5 kg/m2 base on 4*0.4mm Nonstandard: Sizes are available according your requirement Color:As Customers' Request Surface Treatment : Anodized, Brushed, Foil Decoration, Mirror, PE Coated, PVDF Coated Function: Anti-Static, Antibacterial, Fireproof, Mould-Proof Application:Sighboard,Outer-wall,Curtain Wall,Balcony,Industrial Usage Packaging:bulk or wooden box
Aluminum panel Thickness can be: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm You can select the size
Fields F Applicatin * Interir and exterir frntispiece applicatins f buildings. * Cmmerce, business-shpping centres, stres. * Bank and htel frntispiece applicatins. * Airprts, train statins, bus terminals. * Interir wall cating f tunnels, metr statins. * Stadium and sprt cmplex applicatins. * Refurbishment applicatins f ld buildings. * Any kind f balcny decratin applicatins. * Any kind f clumn-jist cating applicatins. * Eaves, ceiling cating applicatins. * ffice applicatins. * Advertisement and billbard design and applicatins. * Gas statins. * Bus and subway statins. * Exhibitin and fair centres and stand applicatins. * Any kind f sign and directin bards. * Escalatrs and elevatrs. Specificatins: Panel thickness: 2-6mm Aluminum cil thickness: 0.10mm-0.30mm Width: 1250mm - 1500mm Length: 2500mm, nt exceeds 6400mm Prcessing: Surface: smth alu-cil with PE cating/PVDF cating Cre: excellent nntxic plyethylene Rear: rdinary cating fr prtectin Functin: Extremely strng agglutinatin, macrmlecule film Excellent rigidity and impact resistance Acid-resistant and alkali-resistant Light weight, easy t installatin Easy t clean and maintenance
Fields Of Application * Interior and exterior frontispiece applications of buildings. * Commerce, business-shopping centres, stores. * Bank and hotel frontispiece applications. * Airports, train stations, bus terminals. * Interior wall coating of tunnels, metro stations. * Stadium and sport complex applications. * Refurbishment applications of old buildings. * Any kind of balcony decoration applications. * Any kind of column-joist coating applications. * Eaves, ceiling coating applications. * Office applications. * Advertisement and billboard design and applications. * Gas stations. * Bus and subway stations. * Exhibition and fair centres and stand applications. * Any kind of sign and direction boards. * Escalators and elevators. Specifications: o Panel thickness: 2-6mm o Aluminum coil thickness: 0.10mm-0.30mm o Width: 1250mm - 1500mm o Length: 2500mm, not exceeds 6400mm Processing: o Surface: smooth alu-coil with PE coating/PVDF coating o Core: excellent nontoxic polyethylene o Rear: ordinary coating for protection Function: o Fire Resistance o Extremely strong agglutination, macromolecule film o Excellent rigidity and impact resistance o Acid-resistant and alkali-resistant o Light weight, easy to installation o Easy to clean and maintenance
- PE Polyethylene - Polyethylene is the most common plastic in the world, with which everyone comes into contact daily. Its primary use is in packaging (plastic bags, plastic films etc.). The most important polyethylene grades are LDPE, HDPE and LLDPE. - PP Polypropylene - Polypropylene is the second most common plastic raw material in the world. Polypropylene is preffered due to its low cost, and its moderate strength has a flexibility that makes it easy to mold into different shapes. Besides these, it is chemically resistant to most oils and solvents, it has excellent impact strength, a low coefficient of friction, excellent moisture resistance and high temperature resistance. - Granule - Polypropylene, the parts used in the automotive industry, textile and food packaging is a thermoplastic polymer with a very wide range of applications. Propylene monomer obtained polymer made by chemical solvents (acids and bases) is extremely resistant against. Polypropylene has very good resistance to fatigue. Low cost, has a good impact resistance. The coefficient of friction is low, provides a very good electrical insulation. Chemical resistance is good. - HDPE Polyethylene - High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes, and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code (formerly known as recycling symbol). -FOR CABLE SECTOR APPLICATION- POWER CABLES SIGNAL CABLES DATA TRANSMISSION CABLES FIRE ALARM CABLES AUDIO CABLES LIGHTING CABLES COAXIAL CABLES CABLES RESISTENT TO -40/-60 C CABLES RESISTENT TO +70/90/105/125 C CABLES RESISTENT TO WATER AND SALTY WATER CABLES RESISTENT TO RODENT CABLES RESISTENT TO CHEMICAL OILS -FOR SEAL SECTOR APPLICATION- GASKETS FOR ALUMINIUM DOOR AND WINDOW GASKETS FOR PVC DOOR AND WINDOW GASKETS FOR WOODEN DOOR AND WINDOW GASKETS FOR ALUMINIUM SYSTEMS AND FACADE DILATATION GASKETS ANY OTHER TYPE OF RUBBER GASKETS -FOR HOSE SECTOR APPLICATION- GASKETS FOR ALUMINIUM DOOR AND WINDOW GASKETS FOR PVC DOOR AND WINDOW GASKETS FOR WOODEN DOOR AND WINDOW GASKETS FOR ALUMINIUM SYSTEMS AND FACADE DILATATION GASKETS ANY OTHER TYPE OF RUBBER GASKETS -FOR AUTOMATIVE INDUSTRY APPLICATION- AUTOMOBILE CABLES PRESERVE CASES FOR CABLES ACCUMULATOR CHARGING CABLES CAR MATS SIDE STICKS OF AUTOMOBILES EVERY TYPE OF INJECTION AUTOMOBILE ACCESSORIES USED INSIDE OR OUTSIDE
Skc-130 portable aluminum composite panel slotting machine Features: 1. Skc-130 is used for slotting and cutting composited material, such as aluminum composite panel, aluminum sheet, wooden plate, etc.One machine, two functions. 2. Skc-130 acp grooving machine is small and light, convenient to work in factory or construction site. 3. Adopting germany motor, strong power, high efficiency slotted , it can slott thousands of square meters per day 4. Grooving depth can be adjusted, slotting precision less than 0.1mm Carton box:32*28*25cm Plastic box:45*38*37cm
Embossed metal insulated composite panels The standard dimension of every emic panel is 4000-375-15mm. 13 pieces/pack. 32kg/pack.
Indo bond aluminium composite panel Most modern and latesh lines as per international standards Sea worthy
stainless steel honeycomb panel is fabricated through special processing technology, the back skin is high-strength aluminum alloy, and core material is aluminum honeycomb core treated by anti-corrosion treatment, and is compounded by special adhesive at high temperature and high pressure. Stainless steel honeycomb panel not only retains the gorgeous decorative texture of stainless steel, but also combines the advantages of high flatness and installation strength of honeycomb panel, which can meet the needs of building exterior wall, interior wall and ceiling decoration.
Aluminum flat rolled products, Building sheets Closure stock, Fin stock, Hot rolled plates, Pattern sheets, Cable wrap stock, Cold rolled coils, Flooring sheets/tread plates, Lamp cap stock, PCB entry sheets/coils, Circles, Cold rolled sheets, Foil stock, Litho stock, Spiral fin stock .
1)Alloy type 1100 or 3003 2) thickness Alloy: we can offer 0.25mm to 0.5mm 3) total thickness of ACP panel: 3mm, 4mm , 5mm, 6mm 4) Coating material: PVDF or PE 5) size for ACP: width we can offer 600mm to 1550mm 6) Color: we can offer various colors 7) Quantity: min order is 1000 square meters for each size and color
Aluminium composite panel Nano-photocatalysis coating can decompose the pelagic microbe & flowing organic materials , so that can be to kill and restrain the microbe, clean the air and protect the virus infecting , also the nano-photocatalysis coating can be self-cleaning. So now the nao-photocatalysis coating become welcome and popular in the construction materials field. Features: 1)excellent easy-cleaning 2)pollution resistance 3)oil resistance 4)good friction resistance 5)strong acid & alkali resistance 6)outstanding weather resistance 7)good self-cleaning characteristic Material: A) front: aluminium alloy sheet coated fluoro-carbon resin (pvdf) with nano lacquer B) core: nontox low density polyethylene C) back: aluminium alloy sheet coated with polyester resin painting D) surface coating thickness: 32µ±1µ E) aluminium alloy: 3003 h24 F) sheet thickness: 0.3mm, 0.4mm, 0.5mm Standard: A) west europe standard ( germany din standard); B) the east europe standard ( russian standard ); C) the commonweathlth standard (u.K bs standard ); D) the north america astm standard; Application: A) may be widely used in galleries, exhibition, saloons, stores, offices, banks, hotels, restaurants and apartments B) an ideal decorative materials for buildings C) an ideal outer and inner walls D) kitchen cabinets , billboards, signboards, tunnels, subway, interiors E) ceilings, eaves, galleries, balconies, partitions, interior decorations F) vehicle bodies, yachts, industrial usage etc.
Fireproof Size: 1220X2440X3mm, 1220X2440X4mm. Max width: 1550mm Max: Length: 6000mm. Paint: PVDF or Polyester (famous brand). Normal PE core or FR (Fire resistance) PE core (Standard: B1). Color: Custom & special ,48 colors(see color chart). Aluminum thickness: 0. 12~0. 50mm (Mainly 0. 12/0. 15/0. 18/0. 21/0. 30/0. 40/0. 45/0. 50). Panel total thickness: 3mm (interior, polyester or PVDF) or 4mm (exterior, polyester or PVDF), etc. Wooden case, 100 pieces/case. In bulk, 3mm 1500pcs/20'container, 4mm1100pcs/20'container, they can be mixed.
The biggest aluminum profile manufacture in the middle of china,mainly produce the 6000 grade aluminum for door and windows.have 23 sets extrusion.mill finish,powder coated,anodized,wooden graining surface treatment can all be available.cutting,drilling,machining can all be done.export many country in the worldwide.
1. Product Name: Aluminium Composite Panel for sign making 2. Introduction: Aluminium Composite Panel is a sandwich panel that is composed of 2 aluminium sheets bonded to a thermal plastic core (or FR core). 3. Characteristic of Aluminium composite panels: (1) Characteristics: Super flatness, high panel rigidity, hight weighted, economic cost, various colors, easy fabrication & Installation, good Anti-UV property, good impact resistance (2) Specification of BOLLIYA Aluminium Composite Panels: Coating: PVDF Kynar500 / FEVE / PE Coating Thickness:PVDF & FEVE >25microns, PE>15microns Panel Thickness: 2mm, 3mm, 4mm, 5mm, 6mm up to 15mm Aluminum Skin Thickness: 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm Alloy: 1100, 3003, 3005, 3105, 5005 Panel Width: 1220mm, 1250mm, 1500mm, 1575mm, 1750mm Panel Length: 2440mm, 4880mm, 5000mm, 5800mm Core: LDPE core, Mineral Filled FR core 4. Bolliya aluminium composite panel applications: building signage, banner,decorative sign. 5. BOLLIYA factory at a glance: Year Established: 1997 Production Lines: 1 high-speed coating line (runs at 30meter/minute) 2 ACP lamination line (runs at 6meter/minute) Production Capacity: 8000sq.m of 4mm panel a day (2 containers) Management Systems: ISO9001 / ISO14001 / ISO18001 Product Quality: Complies with CE, ASTM, EN, BS norms Production Range: Aluminum Composite Panel, Copper Composite Panel, Stainless Steel Composite Panel, Titanium-zinc Composite Panel, Aluminum Honeycomb Panel, Sandwich Panels 6. Third party tests. We cooperate with SGS, TUV, Intertek to conduct quality tests on our product. And we got certifications including ISO9001 and ISO14001.
