V7 Borewell Submersible Pumpset Falcon Premium 175 mm (7) Borewell Submersible pumpsets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - Cast iron casting bowl and SS-410 grade impeller in mix flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Special designed thrust bearing to withstand high axial thrust load - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures services feasibility - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps Specification - Method of Starting : 3 ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 37.3 kW - Power Range : 11.2 kW to 37.3 kW (15 HP to 50 HP) - Version : Three Phase 350 to 415V, 50Hz AC Supply - Speed : 2880 RPM - Head Range : 18 Mtr. To 650 Mtr. - Discharge Range : 1860 LPM to 55 LPM - Outlet Size in Inch : 2.0 , 2.5 , 3.0 & 4.0 - Degree of Protection : IP 58 - Direction of Rotation : Electrically Reversible -3ph - Thrust Load : 11.2 kW -37.3 kW -8000 lbs - Minimum Cooling Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles Salient Features - SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series - 60 feet head per stage in radial flow series - Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads. - Dynamically balanced rotating parts ensures minimum vibration and longer life - Motor portion covered with corrosive resistance Stainless steel J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Additional intermediate bearing in higher stage pumps - Fully SS pump set are available in SS - 304 Grade Specification - Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply. - Speed : 2900 RPM - Head Range : 12 Mtr. To 600 Mtr. - Discharge Range : 1080 LPM to 170 LPM - Outlet Size in Inch : 2.0, 2.5 , & 3.0 - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
LN-AS301 Silicone sealant is a high performance acetic cure sealant designed for all types of glazing applications,adheres to glalls,ceramic,fiberglass,non-oily wood and many building materials. Furture The product is one-part,high performance silicone sealant,ready to use,easy to apply in all seasons. Adhere to glass,ceramic,aluminium alloy and many other building materials. Application Surfaces to be sealed must be dry,clean,free from dust,oil and grease,Cut nozzel to required bead size.Non-porous surfaces should be cleaned with a solvent and a clean,white,lint-free cotton cloth. Precautions The uncured sealant should be come into contact with the eyes or mouth.If sealant gets into the eyes,flush with water.See physician if necessary.Ensure good venilation if used indoors.Keep out of reach of children. Storage stored at or below 27â?? 12 months shelf life
V5 Borewell Submersible Pumpset Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell. Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5 , 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW, 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5
Falcon Premium 125 mm (5) Borewell Submersible pump sets are powered by water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires. And, it is made up of low watt loss silicon steel laminations which are assembled under pressure and rigidly locked in stainless steel stators shell Pump Liquids - Clean - Thin - Non-Aggressive - Non-Explosive - Clear - Cold - Fresh water - Without abrasives - Solid particles. Salient Features - SS 304 Grade Investment Casting Bowl and Impeller in Radial Flow Series.(GRS - Series) - 9 Mtr. Head Per Stage In Radial Flow Series. - Specially designed high performance thrust bearing (SS-420 tilting pad with carbon plate) to withstand axial thrust loads. - Dynamically balanced roating parts ensure minimum vibration and longer life - Motor Portion covered with corrosion resistant S.S. J4 shell - More durability and hygiene - High operating efficiency - Extremely hardwearing water lubricated bearing - Thread type motor construction ensures service feasibility - Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pumpset - Designed for wide voltage operation - Best alternative for JET & Compressor pump set - Additional intermediate bearing in higher stage pumps - Fully SS pumps are available in (GRS - Series) Specification - - Power Range : 2.2 kW to 9.3 kW (3 HP to 12.5HP) - Version : Single Phase 180V to 230V, Three Phase 350 to 415V, 50Hz AC Supply (Single Phase available in 3 HP to 5 HP) - Speed : 2880 RPM - Head Range : 12 Mtr. To 640 Mtr. - Discharge Range : 690 LPM to 80 LPM - Outlet Size in Inch : 1.5, 2.0" & 2.5" - Degree of Protection : IP 58 - Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph - Thrust Load : 2.2 kW â?? 4.5 kW- 3500 lbs, 5.5 kW to 9.3 kW -6000 lbs - Flow Along the Motor : 0.15 m/sec. - Type of Duty : S1 (Continuous) - Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) up to 2.2 kW, 3ph - Direct Online (D.O.L.) upto 5.5 kW, Star Delta (SD) upto 9.3 kW - Maximum Starts Per Hour : 20 Times Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 6 1.75 x 10 m²/sec (max.) - Ph Value : 6.5 to 8.5
silicon carbide whiskers is cubic phase SiC, with the following characteristics: 1. High whisker content (99%), good diameter uniformity and high aspect ratio. 2. Whiskers are easy to disperse and can give full play to the effect of strengthening and toughening; 3. It has excellent mechanical properties, heat resistance, corrosion resistance and oxidation resistance, and can be used in high-performance cutting tools, protective coatings, ceramic and metal matrix composites and other fields. Main applications: Toughened metal matrix composites Toughened ceramic matrix composites Toughened polymer composites Toughened coating material
Application &typical recommended dosage: PIB950 is mainly used in many fields such as petroleum additives and adhesives. Used for manufacturing pressure-sensitive adhesives and sealants. It can also be used as a thickener to improve adhesion, flexibility, aging resistance, airtightness, and electrical insulation when combined with other materials. Also used in the manufacturing of wires and cables, plasticizers, etc Storage: In accordance with local regulations, store in original container protected  from direct sunlight in a dry, cool and well-ventilated area. Keep container tightly closed and sealed until ready for use. Package:  180kg/drum
Adhesives & Sealants
RTV Silicone Electric Conductive low modulus silicone sealant CAS No.:67763-03-5 Other Names:adhesive MF: mSiO2nH2O EINECS No.: 210-898-8 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,cables,automotive,LED,Aerospace,etc Brand Name: SEPNA Model Number:SI1336 Color:transparent/white/black Shelf life:12 months Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach Density:1.02-1.25(g/cm3) Using temperature:-60 ~ +200? Curing speed min:5-10 Tensile strengh Mpa:=2~2.5 Hardness:3 ± 3//30 ± 5 Elongation at break:=300 Packaging Details:100ml /tube 100pcs/ctn 310ml/tube/25tube /ctn black/white/transparent Delivery Detail:7-20 days
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
Product Introduction Ausbond® 181 series is a kind of organic silicon rubber which is half of flowing, single component, curing at room temperature, is medium curing, causes cross bonding by condensation reaction among water in air, form high-quality elastomer.For most metals, a plastic is non-corrosive and excellent adhesion. Against alternating cold and heat, aging condition and dielectric protective, shockproof, damp-proof, water resistance, corona-resistance and leakage resistance. It is fully accepted by the requirements of the EU ROHS.It can conform to the requirements of EU ROHS Directive completely. Typical Purposes 1.Used in sealing, splicing and fixing among electronic product, Instruments and electronic component on electrical equipment, in sealing, splicing among mini-electric appliance, electron. 2. It is an excellent product for waterproof, splicing and sealing on the both ends of LED; sealing soft LED. 3. Splicing and sealing among engineering plastics or between coil and power's plastic shell and so on. Package Specification 100ml/piece, 100 pieces/case; 300ml/piece, 24 pieces/case. Storage and Transport 1. Store in the cool and dry place, with shelf life 9 months (25¡æ). 2. This product belongs to non-dangerous articles please transport it as general articles. 100ml/tube 100tubes/case 300ml/tube 24tubes/case.
Zs-nj-d959w is one kinds of one-component flame resistance and thermal conductive silicone sealant at room temperature curing. With good adhesion for pc/abs, various metal such as alumina, copper, stainess steel, etc. Keep continuous stable property at the temperature range of -60?~200?. During the curing process, it will release the alcohols, which no corrosion to the materials such as polycarbonate(pc) and copper. Completely complied with rohs of eu directive. Https://www.Alibaba.Com/product-detail/flame-retardant-ul-94v-auto-vehicle_60550509931.Html
Sealants,adhesives and glue.Shipping
Quartz is a mineral composed of silicon and oxygen, with a chemical composition of SiO2. It is the most abundant mineral in Earth's crust and is resistant to both chemical and physical weathering.
Storage Food Box Break Resistant Silicon Seal Ring Ultra Clear Available in different sizes Available in different Colors High Quality Clear Plastic Strong storage capacity BPA Free Premium Material Leak Proof Lock Airtight Preserved Food
Blanket, tissue, luggage bags, abs trolley bags, cosmetic items, soap, face wash, face cream, shower gel, anti bacterial soap, hand wash, shampoo, hair conditioner, hair oil, body lotion, hand & body cream, facial cleanser, care soap, petroleum gel, glycerin soap, baby soap, hand sanitizer, all purpose sanitizer spray, multi surface disinfectant spray, hair gel, dishwashing liquid & kitchen cleaner, detergent powder & contact adhesive, sprayable contact adhesive, pir pur phenolic boards, hvac adhesive, wood adhesive, casbon value+, casbond wood glue, flooring adhesive, vinyl flooring adhesive, flooring adhesive, polyurethane flooring adhesive, casbond pufix 71, gps silicon sealant, top seal ms 870 high grab, weather sealant,. we are certified iso 17025, 22716:2007,9001 2015. .Clearing agents, transportation & shipment
-Full protective shock-proof, scratch-resistant, anti-skid and dirt-resistant. -Superior EVA soft shell material, metal looking sense, mechanical texture, lightweight. -Anti slip silicone, comprehensive breathable perspiration, comfortable to wear. -Large capacity, convenient to organize the personal items. -Strong magic tape is more durable for using, comfortable to wear. -Reflective marking for safe nighttime activity. -Multifunctional arm band is suitable for running, riding,climbing, etc.
1. Marbles Marble is a metamorphic rock with a smooth, polished surface and natural veining patterns. It is prized for its aesthetic appeal and is commonly used in flooring, countertops, and sculptures. 2. Granite Granite is a durable igneous rock with a coarse-grained, speckled appearance. It is commonly used in countertops, flooring, and exterior cladding due to its hardness and resistance to weathering. 3. Quartz Quartz is a hard mineral composed of silicon dioxide, often found in various colors. It is used in electronics, watches, and engineered quartz for countertops and flooring, known for its durability and non-porous nature.
Applications: 1. Suitable for anti-mildew caulking between the kitchen, bathroom, and window sill gaps. 2. Fills cracks and Waterproof 3. Suitable for indoor use. 4. Adhesion to almost all types of materials (concrete, wood, metal, cork, aluminum, PVC, copper, brick, stone, porcelain...). Not recommended for PE, PP, and PTFE. 5. Suitable for assembling, sealing, and affixing. Characteristics 1. Professional mould or mildew resistant, Permanently anti-mildew 2. Available in multiple colors required by customer 3. Ecological (A, EnviroCert, and ISEGA Certificates), No Harm to Humans 4. Solvent-free. 5. Neutral and odorless. 6. Crack-resistant. 7. Permanent elastic properties. 8. Water-resistant, Excellent performance for waterproof 9. Content per unit: 300 ml,500ml, and other packaging capacities.
