Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
APPLICATIONS Thread rolling screws are designed forreliable and secure fastening intomaterials such as plastic. They have atrilobular lobed cross-section, and formthreads in pre-existing holes by pushingmaterial outward during installation.
APPLICATIONS Torx screws are commonly foundon automobiles, motorcycles, bicyclebrake systems (disc brakes), hard diskdrives, computer systems andconsumer electronics
APPLICATIONS Thread rolling screws are designed for reliable and secure fastening into materials such as plastic. They have a tri-lobular lobed cross-section, and form threads in pre-existing holes by pushing material outward during installation
APPLICATIONS They are used in military applications, tobuild and secure medical equipment andeven in marine hulls. They are also used invalves, electronic devices & panels, fuel tanks, food processing equipment, consumer products and more. The Socket Cap Seal Screw is safe, high quality and reliable.
Imperial Security Torx Button Head Screw Size 1
Imperial Torx Pan Head Sealing Screws
Metric Socket Cap Head Sealing Screws
Pozi Pan Head Thread Rolling Screws Stainless Steel A2
Torx Pan Head Thread Rolling Screws
Security 2 Holesnake Eye Pan Head Screws Size 1 And 2
Self Tapping Security 2 Hole Snake Eye Pan Head Screws
SELF TAPPING SECURITY 2HOLE SNAKE EYE PAN HEAD SCREWS APPLICATIONS Spanner (Snake-Eye) security bits are used for making installations more secure. By adding an unconventional drive stile in public areas, they are much less likely to be vandalized or tampered with on a whim. Spanner screws can be seen commonly on public applications such as: Bathroom dividers and Public Art Displays.
APPLICATIONS Torx screws are typically used in vehicles, motorcycles, bicycles, computer systems, hard disk drives and consumerelectronics. The unusual star-shaped headmakes them far more secure than regularflat-head or cross-head screws and allowshigher torque transmission so screws andbolts can be tightened more securely.
Metric Ultra Low Head Socket Shoulder Screw
Torx Ultra Low Cap Head Screws
TORX PAN HEAD THREAD ROLLING SCREWS - STAINLESS STEEL (A2) APPLICATIONS Thread rolling screws are designed for reliable and secure fastening into materials such as plastic. They have a tri-lobular lobed cross-section, and form threads in preexisting holes by pushing material outward during installation.
WET SALTED COW HS Code 02045011 PRICE = US$1000/TON CIF ORIGIN: SOUTH AFRICA PACKAGE:,50KG MIN ORDER:200TONS 1)WET SALTED COW HIDES. Machine flayed, hand assisted at the belly No ticks, no visible grubs, no humps, no brands No head, no cheeks, no tail, short shanks Weight: 20 kgs and up Average weight: 26 to 32 kgs Selection: 90% A, 10% B 1 x container = 850 hides approx Availability: 12 containers per month Price Per Piece:$16 C&F Price 2)WET SALTED BUFFALO HIDES Full substance, unsplitted 100% machine flayed No ticks, no scratches, no humps Size: 32 sq.ft. and Up Average size: size 42 sqft Thickness: 3 to 4 mm Weight:25 to 45kg Average weight: 17to 23 per Hide Selection: 80% A/B, 20% C/D Male 75% / Female 25% 1 x 20 container = 1300 hides Price Per Piece:$16 C&F Price
Salient Features Highly efficient 3-Phase Water Filled Motor - 100% EC grade copper winding - Easily Rewindable - Motor Designed with Higher Cooling Effect Ensures Longer Life - Sustainable uniform performance for years - Ensures long life durability - Optimized Hydraulic & Mechanical Design - Improved efficient performance - Excellent output in Low Radiation - Dynamically balanced design - Zero maintenance Product Specification Power Range : 3.0 HP to 10.0 HP Operating Speed : 0 - 2890 RPM Operating Frequency : 0 â?? 50 Hz Input Solar DC Power Range : 3000 Wp, 10000 Wp Input Solar DC Voltage Range : 330 Vmp , 600 Vmp Head Range : 10 Mtr , 50 Mtr Discharge Range : 126000 LPD , 425000 LPD Type of Duty : S1 Material Of Construction Part Grade Oil Seal : Nitrile butyl rubber Motor Shaft : SS - 420 Motor Body : Cast Iron / J4 Motor Bush : LTB-4 / Teflon Thrust bearing assembly : SS - 420 & Carbon Base : Cast Iron Bracket : Cast Iron Flange : Cast Iron Casing : Cast Iron Impeller : Cast Iron