Camay Refrigerator Application scenarios Widely used in the storage and sales of various beverages, food, meat, dairy products, fruits, flowers, etc. Scenarios like Restaurant, Kitchen, Hotel, Supermarket, Convenience Stores, Chain Stores etc. Camay Refrigerator Unique Feature: 1 Solid and effective refrigeration temperature; 2 A full set of certifications for the U.S.A market including ETL SAFETY/ETL SANITATION/DOE/CEC; 3 Polyurethane/Cyclopentane/CFC Free insulation, effective heat preservation; 4 Door panel thickness is at least 60mm; 5 Made of stainless steel, high-quality sheet metal processing technology, rust-resistant and beautiful finishing; 6 Mass production, lowering costs, and benefiting global customers; 7 13 months long after-sales service, a certain percentage of free parts supply; permanent online technical support and training. SPECIFICATION / PARAMETER MODEL MPR-49G Classification Glass Door Merchandiser Cabinet dimension WxDxH mm / Inch 1382*800*2115 ; 54.41*31.50*83.07 Crated Dimension WxDxH mm / Inch 1430*848*2195 ; 56.30*33.38*86.42 CapacityL/Cuft 1252 / 44.21 Inner Temperature 0.5-5 / 33~41 Climate type ST~T Ambient temperture 38 / 100.4 53% Refrigerant R290 Insulation Type Polyurethane/Cyclopentane/CFC Free Cooling system Air Cooling Defrost system Automatic Defrost Compressor Cubigel Amps A 3 Voltage V/Hz 115/60 Weight Kgs / Lbs 200.5 ; 442 Shipping Weight kg 236.5 ; 521 Power W 345 #of shelves 3 #of doors 2 Certification ETL SATETY ETL SANITATION (NSF) DOE
Color-coated aluminum foil is an aluminum foil product whose surface has been painted or coated. The performance of aluminum foil is very stable, and the paint can be used for several years without fading. Color-coated aluminum foil has the characteristics of water resistance, steam resistance, light resistance, taste resistance, corrosion resistance, heat resistance, low temperature resistance, etc., and is not easily affected by the environment and temperature. Therefore, it is often used in food, medicine, beverages, cosmetics, spices, etc. to prevent items from absorbing moisture, oxidation, volatilization and deterioration. When aluminum foil is placed in the air, a dense oxide layer forms on the surface. If the oxide layer is not dirty, the ink will have good adhesion to it. In order to improve the adhesion between the ink and the aluminum foil surface, corrosion cleaning must be performed before printing. Coating treatment eliminates lubricant contamination and enhances the adhesion between ink and aluminum foil surface. When performing color printing, since the aluminum foil paper itself has color, in order to ensure the correct restoration of the ink hue, the background color must be printed before printing, and the background color is usually white ink. Color-coated printed aluminum foil commonly uses 1000, 3000, and 8000 series alloy numbers, including 1100, 1070, 3003, 3004, 8011, 8021, 8079 and other alloy numbers. Color printed aluminum foil is suitable for a variety of industries, including the food and beverage industry, pharmaceutical industry, personal care and cosmetics industry. The foil is printed using high-quality rotogravure and flexo printing, giving the packaging a vibrant appearance. Hongchang Aluminum is a professional aluminum foil manufacturer specializing in the production of 1-8 series aluminum foil, including printed aluminum foil, colored aluminum foil, packaging aluminum foil, insulating aluminum foil, etc. The product range is complete and the specifications can be customized according to customer needs.
We offer a UL/FM Approved and LPCB Certified  wide range of EMACO Firefighting Equipment products for: Sprinklers: Designed for use in automatic sprinkler systems - Pendent, Upright, Conventional and Sidewall Sprinkler. Temperature response - Standard/Quick Response. Temperature Rating : 57 C, 68 C, 79 C, 93 C,141 C Finish - Brass / Chrome / White plated Nozzles: Open type non-automatic nozzles, UL/FM Listed. *Medium Velocity Fixed Spray Nozzle:* Specifications: 1. Material - Brass, SS, Aluminium Bronze 2. K Factor - 18, 22, 30, 35, 41, 51, 64, 79, 91, 102 3. Spray Angle - 65 , 80 , 90 , 100 , 110 , 120 , 140 & 160 ° 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - ½" (15mm) BSPT Reverse Action - Medium Velocity Fixed Spray Nozzle: Specifications: 1. Material - Brass, SS, Aluminium Bronze, Copper 2. K Factor - 18, 22, 30, 51, 64, 79, 102 3. Spray Angle - 120 & 140 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - ½" (15mm) BSPT High Velocity Fixed Spray Nozzle: Specifications: 1. Material - Brass, SS, Aluminium Bronze 2. K Factor - 18, 22, 23, 26, 32, 42, 48, 58, 61, 78 3. Spray Angle - 75 °, 80 , 90 , 100 , 115� , 120 4. Finish - Brass, Chrome, Electroless Nickel plated & Epoxy powder Coated 5. Working Pressure - 175psi (12 bar) 6. End Connection - 3/4 (20mm) BSPT/ NPT & 1" (25mm) BSPT/ NPT
Miniature Ball Screws are an efficient and cost-effective solution in a small envelope, ideal for use in small spaces. Ball screw nut assembly range from 4 to 14mm in diameter with leads from 1 to 20mm - all with standard lead accuracies of ±52µm/300mm. Miniature Rolled Ball Screws are ideal for laboratory, semiconductor, and medical applications. Miniature Ball Screw Specifications Ball Screw lead accuracy conforming to JIS B1192 is specified by the tolerance of actual mean travel amount, or Screw Shaft effective length, travel variation and travel variation within arbitary 1 revolution over the Screw Shaft effective lentgh. Tolerance of each accuracy grades are shown in the Table. Nominal travel: Travel in axial direction when rotated arbitrary number of revolution according to the Nominal lead. Specified Lead: Lead given some amout of correction to the Nominal lead in order to compensate the deformation generated due to the temperature rise or the load. If you need any kinds of motion control systems, please contact us, as a professional linear motion manufacturer, VXO is willing to offer you high quality products.
PH meter Description Online pH / ORP meters and pH / ORP controllers are one of the most common water quality analysers in use today in water treatment and process plants and yet online pH / ORP meters cause continual problems for their operators. What is needed is a stable, reliable, online pH/ ORP analyzer for a reasonable cost. That is exactly what you get with the BOQU Instrument. A pH and ORP meter consist of a pH or ORP sensor, transmitter and process adaption, combined to best suit your pH control needs. The online ORP meter from BOQU Instrument provides accurate process pH measurements in a wide range of environments, from ultra pure water to hygienic measurements in a bioreactor to dirty chemical production. Our Advantages 1ã??Stable, Reliable,Precision,Continuous measurement pH,ORP and Temperature. 2ã??Instrument for panel mounted,wall mounted,pipe mounted. 3ã??2 ways of 4-20mA and standard RS485 Modbus RTU 4ã??Instrument provide High/Low control relay 5ã??Local Data logger function for 1000 times 6ã??Application:industrial waste water, drinking water environmental monitoring, ultra pure water,fermentation, food production process etc. If you need our online ph meter, you can contact us through our online chat window.
Bakery Improver Bakery improvers provide peace of mind by helping to manage the many variables in the bread-making process, such as fluctuations in temperature, humidity, flour quality, and labor. This ensures consistent, high-quality results with every batch of bread. Yulin has been a leader in innovation in Bakery production. Our bread improvers offer a unique advantage with vertical integration, combining the production of enzymes and natural yeasts. Whether you're in the fresh, packaged, or frozen bread industry, our improvers can help you overcome production challenges and deliver top-quality products. We offer a wide range of solutions, from versatile, all-purpose improvers to customized modular options, ensuring you find the perfect fit for your needs. Fresh Bread: Baking improvers designed to give you the best peace of mind and outstanding fresh (crusty and soft) bread product results with a shelf life of up to 3 days. Packaged Bread: Baking improvers are designed to give your packaged product an outstanding texture until the end of its shelf life. Frozen Bread: Improvers designed for semi-finished bakery products that need to be baked at the point of sale.
Borosilicate windows excel in environments with high temperatures and challenging conditions. Thanks to their superior thermal shock resistance and stability, these windows preserve their flatness across diverse environmental scenarios. Specifications of Borosilicate Windows Borosilicate glass window product parameter table project Indicator requirements 1. Material Borosilicate glass, such as TEMPAX, PYREX, Borofloat33, etc. 2. Diameter ODâ?¤300mm OD�±0.025 or according to customer requirements 3. Center thickness T=0.1ï½?50mm�±0.01 or according to customer requirements 4. Effective focal length according to customers needs 5. Working distance according to customers needs 6. Effective aperture EDï¼?80% area 7. Coating AR Rï¼?0.5% @�»nm 8. Surface shape Ultra-high precision Rtâ?¤0.1�¼m, high precision Rtâ?¤0.5�¼m, precision Rtâ?¤1�¼m 9. Surface quality 60-40, 40-20, 20-10, 10-5 Features of Borosilicate Windows One-stop customized production: Solar Valley processes various custom optical windows, circular, D-shaped, square, trapezoidal and other structural borosilicate windows according to customer requirements, and can provide different size ranges and materials. Window piece, the base material is borosilicate glass
Sintered Mesh Filter Cartridges Sintered Mesh Filter Cartridges are made by overlapping multiple layers of wire mesh and sintering them in a vacuum furnace, rolled into a cylinder and welded together at both ends. For the roundness and flatness of the whole structure, roll seam welding process is added. Its interlaced mesh forms a rigid structure, which overcomes the shortcomings of ordinary wire mesh of low strength and unstable pore shape, and is also superior to sintered powder cartridges, ceramic cartridges and so on. Most importantly, this stainless steel filter cartridge is popular in many industries such as food, environmental protection, chemical industry, aerospace and so on with its outstanding features such as high temperature resistance, smooth wire holes, good air permeability, and strong dirt-holding capacity. ZHUAN LV CSM filter elements are made from CWM mesh composite (MC) filter media. This unique material is made from wire mesh and perforated metal, sintered together into a durable porous filtration medium.
Kenyan Refined sunflower Cooking oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels and boxes for the bottles are available by request. Product Attributes; Grade:Level 1 Storage Type:Bottles Specification:Refined Shelf Life:24 Months Manufacturer:NANCKY PRODUCTS Ingredients:Sunflower seeds Content:Sunflower Oil Address NAIROBI, KENYA Instruction for use:Cooking, deep frying Place of Origin: KENYA Type:SUNFLOWER OIL Product Type:Nut & Seed Oil Processing Type:Refined Cultivation Type:Organic Use:Cooking Packaging:Bulk, Drum, Plastic Bottle Purity (%):99.99 Volume (L):5 Brand Name:NANCKY Model Number:90009776
PRODUCT BENEFITS: Weaning spoons (from 6 months): medium-deep spoon design makes it easy for babies to eat and encourages lip reflex. Weaning Fork (from 6 months): Curved design makes it easy for babies to put food in their mouths and encourages them to eat on their own. Weaning bowl (from 6 months): a bowl used during the period of eating soft foods, with a high wall to support food scooping and a convenient handle. Weaning plates (from 6 months): designed to hold food and easy to scoop, in addition, the weaning plate has a wide heart, handles on both sides to hold and take food. Low cup (from 12 months): low cup for weaning soups and serves as a cup of water as baby grows. Weaning tray (from 12 months): the tray can be used from the first weaning period to the period of solid food. DIRECTIONS FOR USE: Used to teach babies to eat solids. Temperature resistant from -20 to 120 degrees Celsius. Do not cover when using the microwave oven.
Air/Oil Separator 42542787 Replacement Compatible Filter Element for Ingersoll Rand No reviews yet.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Replacement For Kobelco 75HP Air Compressors Air Oil Separator Part Number P-Ce03-578 P-Ce03-596 P-Ce03-592.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Replacement For Atlas Copco Air Oil Separator Filter1604038200 2911007500 2911011602 1615769500.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
2116010085/2116010086 Oil-Gas Separator for Fusheng Air Compressor Machine.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Oil Separator 2202929400 for Atlas Copco Compressor 2202929450 1630404600.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Oil Separator 2202929400 for Atlas Copco Compressor 2202929450 1630404600.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
6221372800 Oil Separator Compressor Replacement Filter Substitute Spare Parts.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
Replacement For Kaeser Air Compressor Parts Air Oil Separator 6.4334.0.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.
1625481101 1625481100 Air Oil Separator for Atlas Copco Air Compressor Filter 1625481150.The oil mist filter for vacuum pump is my company independent research and development production of high efficiency filtration product, used for oil lubricated rotary vane vacuum pump exhaust the oil and gas separation device, installed in the vent pipe of the vacuum pump, in the process of vacuum pump operation, exhaust gas go through the filter, oil mist particles in liquid form cannot directly go through glass fiber filter paper, and then attached to the filter paper, clean gas is under certain pressure go through the glass fiber paper discharge smoothly, and to reduce pollution,ensure a clean environment. Data: Brand model size of interface sucking rate Nanfeng KF25 DN25 8L/S Product features: 1, Vacuum pump oil mist filter shell adopt imported high strength transparent material production, high temperature resistance, corrosion resistance, good appearance, and can directly observe the oil and gas separation condition; 2, Long service life, effectively filtering mechanical pump vent discharge of oil mist, filtration rate above 99%, can effectively reduce the air pollution, improve the working environment; 3, Filter material adopt imported glass fiber paper, stable performance and strong oil absorption; 4, The device is designed as a quick release v band clamp flange, quick installation and easily fitting with vacuum pumps exhaust pipe of different models and import brands . Replacement steps of exhaust filter: 1.After the vacuum pump stops, ensure that the system is under pressure. 2.Remove the quick release v band clamp flange on the filter. 3.Remove the oil mist filter and replace it with a new one. Note: when replacing the oil mist filter, it is better to replace the vacuum pump oil at the same time.