Hydraulic end assembly AH0501010500 AH35001-05.00 Hydraulic end assembly AH0801010500 AH34001-05.00 Hydraulic end assembly AH1001010500 AH33001-05.00 Exhaust filter assembly AH0501011400 AH35004-11.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Cross head assembly AH0501010400 AH35001-04.00 Cross head assembly AH0801010400 AH34001-04.00 Cross head assembly AH1001010400 AH1001010400 Pinion shaft assembly AH0501010300 AH35001-03.00 Pinion shaft assembly AH0801010300 AH34001-03.00 Pinion shaft assembly AH1001010300 AH33001-03.00 Crankshaft assembly AH0501010200 AH35001-02.00 Crankshaft assembly AH0801010200 AH34001-03.00 Crankshaft assembly AH1001010200 AH33001-02.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Power end lubrication assembly AH0801010600 AH34001-06C.00 Power end lubrication assembly AH1001010600 AH33001-06C.00 Spray pump assembly AH0501010800 AH35001-08B.00 Spray pump assembly AH0801010800 AH34001-08B.00 Spray pump assembly AH1001010800 AH33001-08C.00 Random tool AH0501011500 AH35001-20.00A Random tool AH0801011400 AH34001-15.00A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 40hp/4500rpm (29.41kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 82 x 70 (3.23 x 2.76) Displacement cc (cu. in.) 1019 (68) Maximum output hp(kW)/rpm at crankshaft 36hp/4500rpm (26.5kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Zig Zag Stitching Capability: The machine offers a wide range of zig zag stitch patterns, allowing you to add decorative touches, secure seams, and create unique designs. The zig zag stitch is ideal for finishing edges, appliqu�© work, and embellishments. Adjustable Stitch Width and Length: You have the flexibility to adjust the stitch width and length to suit your specific sewing requirements. This feature allows you to create precise and customized stitches, whether you are working on delicate fabrics or heavy materials. AutoLubrication System: The built-in automatic lubrication system ensures that the machine's moving parts are properly lubricated always. This promotes smooth operation, reduces friction, and extends the machine's life span. Regular lubrication also minimizes the need for manual maintenance. Flat Bed Design: The flat bed design provides a stable and spacious work surface, ensuring smooth fabric feeding and precise stitching. It offers a clear view of the sewing area, making it easier to guide the fabric and maintain accuracy. Speed Control: The machine comes with adjustable speed control, allowing you to set the sewing speed according to your preference and project needs. This feature ensures that you have full control over your stitching, even when working on intricate designs or delicate fabrics.
Electric welder, brand pr screw air compressors, pr permanent magnet synchronous motor air compressors, kaishan screw air compressors, kaishan permanent magnet synchronous motor air compressors, ganey scroll compressors, refrigerated air dryer, air filter, air tank, lubricating oil and various types of spare parts for air compressors.
Spring dial scale 100 kg Bimetal steel. As you know, spring dial scale is a kind of metal (spring in specific) that shrinks at low temperature and stretches at high temperature. This characteristic of metal makes the scale become less precise. To counter this effect, BenThanh Scale mounted Bimetal steel leaf in the transmission lever to keep the scale operating precisely even under harsh temperature condition. At transmission lever joints, brass bushes are fitted up in addition to the use of lubricant help to prevent rust and minimize abrasion, thus enhance life-span of scale especially when scale is used in high humid environment. Protective pipes are also used to conserve lubricant and limit water and dust from getting into the joints. Inox Plate. Scale plate is made of inox (stainless steel). Loading frame. Loading frame is made of 5mm thickness steel to enhance longevity of the scale.
Product Description The TiborLight Fly Fishing Reels series was launched in 1999, to the delight of trout, bass and other light fly anglers. This series now features the ConstaLube System, an innovative drag design composed of a special felt and lubricant, producing constant lubrication for a totally smooth drag throughout the entire range of resistance. The Tibor Light Spring Creek CL, Tail Water CL, and Back Country CL Wide are designed with the same uncompromising standards as our time-tested Billy Pate and Tibor series. Suitable for 3 to 8 weight rods in both fresh and saltwater conditions, even the most fragile tippet can be fished with complete confidence. Their quality and construction, watch-like precision, and superb drag system will deliver unmatched performance against anything fron an 8 inch brook trout to a 30 lb. tarpon. Branch Office Shop Fishing Tackles Jl. Jend. Sudirman kav. 112 - 114 Jakarta - 12190 Indonesia
Characters: Yellow viscous liquid, insoluble in cold water and ethanol, soluble in hot grease, non-ionic water-oil emulsifier (W / O). Applications: No bad odor, has good thermal stability. 1. Used in chocolate, add a small amount, can significantly improve the mobility of chocolate products, and save the amount of cocoa butter. 2. Expedit the process of filling and mold forming for chocolate products, optimize the process and make the small bubbles to discharge easily, and then avoid occuring empty holes and pore in the chocolate products. 3.Used with lecithin , has a good synergistic effect, thinning the thickness of chocolate coating to make it easy to process. 4. In humid conditions, can reduce the viscosity. And form chocolate sugar coat quickly. And accelerate its conglutination . And increase adhesion, reducing the small pores.
Premium products from accurate process: chain sheet through forging, quality adjustment ( quenching process, ensure the hardness of the chain core over HRC 32, walking rail surface hardness over HRC 55 , and have good structural organization); transfer to the workshop, first to the raw chain for polishing, and then through CNC processing equipment processing (filled by grease and fitted with polyurethane seals to prevent abrasive materials from entering the internal pin & bush), then chain, pin and other accessories assembly, pressure of each chain is fixed, to ensure that each chain position is the same. customized chains upon request such as heavy duty or extended life chains , need bigger bushings with deeper carburized layer and higher links for MAX service life.
Car care ,car detailling , tyle polish coollents cleaning chemicals , car wash shampoo , maintenance productmechanical product home care product hi foam shampoo chain lube wooden shiner car wash shampoo chain cleaner grease cleaners dashboard cleaner rust off spray stain removers interior cleaner 4 way spray sticker & gum removers tyre polish throttle body spray stain removers glass cleaner ac foaming all shine polish rodent repellent multipurpose foam cleaner engine flush helmet cleaner radiator flush anti rust coating coolant rubbing compound brake & parts cleaner liquid wax enamel spray paints paste wax under body panel protection electronic contact cleaner.
Varieties: Drawing coarse silk, medium silk, fine silk, extra fine silk Specifications: TS-O S-O S-1B S-1 Performance: With good high temperature lubricity, protect the mold, reduce wear. Superior high temperature coating, 600-1200â?? does not fall off, does not burn, protect the wire is not oxidized, easy to preserve, no deterioration.
Square Baler Wire Baler wire is primarily used to manually bale hay, wheat or straw bales. Our black annealed baler wire has a long-lasting oil coating that protects the wire from rust and corrosion, and is easy to install in any baler. Advantages Easy to unwind Easy to install and operate on any baling equipment Tape retains its original shape during use Minimises wire waste Won't get stuck in equipment Long-lasting cord lubrication
We are a reliable supplier of high-quality Crude Tall Oil (CTO), a versatile, bio-based product derived from the papermaking process. CTO offers a sustainable and cost-effective alternative to traditional materials for various industries.Origin EU. Eco-Friendly: Reduces your environmental footprint by utilizing a renewable byproduct. High Performance: Excellent properties for adhesives, lubricants, biofuels, and more. Competitive Pricing: Attractive pricing to maximize your budget efficiency. Guaranteed Quality: EU ISCC certified, ensuring consistent quality and responsible sourcing.
Zinc oxide, an inorganic compound with the chemical formula ZnO, is an oxide of zinc, insoluble in water, ethanol, soluble in acid, ammonium chloride, is a commonly used chemical additive, widely used in the production of plastics, silicate products, synthetic rubber, lubricating oils, paints and coatings, ointments, adhesives, foodstuffs, batteries, flame retardants and other products.
Flat lock is a common type of mechanical lock. Its basic structure includes lock cylinder, lock body and handle. The lock cylinder usually contains components such as slot, sleeve, core barrel and lock plate, which are used to control the opening and closing of the lock. The lock body is made of metal, which is durable and safe. It contains the lock cylinder and contacts the surface of the door or other objects. The handle is used to manually operate the lock to rotate the lock cylinder to open or close the lock. It is mainly used for door locks of various cabinets, such as machine tools, electric cabinets, etc. According to the search results, flat locks have different types and characteristics. Maintenance and care: In order to ensure the normal use and extend the life of the flat lock, the following maintenance and care measures should be taken: 1.Regular cleaning: Use a soft cloth or cotton swab to dip a small amount of detergent (such as detergent or soapy water) and gently wipe the outer surface of the flat lock, while ensuring that no moisture or detergent residue is left on the lock hole and the internal slide. 2.Prevent dust accumulation: Keep the area around the flat lock clean to prevent dust and debris from entering the lock body. 3.Lubricate the lock core: Regularly use an appropriate amount of lock core lubricant (such as lithium-based lubricating oil) to drip on the lock core, and then insert the key to apply the lubricant. 4.Use with caution: Avoid violent impact, strong twisting or excessive force. 5.Adjust fasteners: If the flat lock is found to be loose or shaking, you can use appropriate tools to gently tighten the screws of the lock body and the mounting base. 6.Regular inspection: Regularly check whether the various components of the flat lock are normal.
We are proud suppliers of talc, catering to a diverse range of industries including ceramics, paint, masterbatch, plastics, rubber, and filling. Talc, known for its exceptional properties such as lubricity, heat resistance, and chemical inertness, plays a pivotal role in enhancing product quality and performance across these sectors. Our commitment to delivering premium-grade talc ensures that we meet the stringent requirements of our clients, enabling them to achieve superior results in their applications.
Zinc Stearate is used in plastic, rubber construction chemicals, and the paint industry. It is a powerful mold release and hydrophobic. It is an external lubricator. It is suitable for all types of rubber and plastic applications. Zinc Stearate is used as sandblasting and flattener in varnish, coating, and ink applications. Also, it is used as water-repellent in beton, rock wool, paper, textile, construction chemicals and paint industry. It is used as mold release and dusting. It can be manufactured with demanded particular size and density, according to production process and industry.
Introducing the KR BM 1700 S Automatic Spray Machine with advanced features for optimal painting results. Precision laser scanning and a unique water filtration system ensure smoother surfaces on various materials. The machine's eco-friendly recycling system offers material savings, and its automatic lubrication system guarantees long-lasting operation. Enhanced with innovative technology for efficient color transitions and IoT capabilities for real-time data collection. #IndustrialAutomation #PaintingSolutions #automaticpaintingmachines #karabudakengineering #kamamachinery