The hard, fibrous, chemically inert, nontoxic, and biodegradable material known as walnut shell is utilized as a Loss Circulation Material in drilling applications. It is produced by grinding specialized walnut to specific sizes and can be utilized in fluid systems of various densities. In some cases, Walnut Shell (F/M/C) is utilized as a nut lubricant to enhance lubricity and decrease torque and drag.. Maintain consistent viscosity and suspension in your drilling mud using our viscosifiers. These additives are carefully formulated to provide stability, lubrication, and enhanced drilling performance. The use of WALNUT Shell as a material for controlling lost circulation in drilling fluids is a common practice in the oil and gas industry. It is highly effective in mitigating the loss of drilling fluids during the drilling process, which can result in significant cost savings. This material can be used alone in re-circulated fluids, or in combination with other materials such as fibrous and flake materials in pill form, to provide an even greater level of effectiveness in preventing lost circulation. In addition to its loss circulation control properties, WALNUT Shell is also utilized as a lubricant in drilling operations to increase lubricity and reduce torque and drag. This is achieved by applying the shell material to the threads of drill pipe and other tools used in drilling operations. The lubricating properties of WALNUT Shell help to reduce friction and heat buildup during drilling, thereby increasing the efficiency and safety of drilling operations. Overall, WALNUT Shell is a versatile material that has a wide range of applications in the drilling industry. Its unique combination of properties, including its hardness, fibrous nature, chemical inertness, non-toxicity, and biodegradability, make it an attractive choice for use in drilling operations.
Oxidized polyethylene waxis made from polyethylene wax after special oxidation process. The molecular chain has certain functional groups, so its miscibility with polar resin has been significantly improved. Due to a certain amount of carbonyl and hydroxyl groups in the molecular chain of oxidized polyethylene wax, the compatibility with fillers, pigments and polar resins is significantly improved. The wettability and dispersibility in polar system are better than that of polyethylene wax, and it also has coupling property. Due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, plays the role of internal and external lubrication, and has good antistatic property. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced. The lubricity of oxidized polyethylene wax added to the rigid, transparent and opaque PVC formula is better than that of other lubricants. It can also be used as raw and auxiliary materials for textile softener, car wax and leather softener. It can be used as dispersant, lubricant, brightener and coupling agent of pigment or filler such as dense masterbatch, polypropylene masterbatch, additive masterbatch and filling masterbatch. Rubber and plastic processing lubricants, film removers and phase solvents. In the formulation of waterborne coatings and inks, it provides excellent wear resistance, adhesion resistance and scratch resistance At present, oxidized polyethylene wax is widely used in PVC foam board, but it is less used in other aspects due to price reasons. PVC foam board is the most difficult to produce in PVC products, which has the most problems and is the most difficult to solve. The plasticization can be significantly accelerated after adding oxidized polyethylene wax. Here we can see the uniqueness of oxidized polyethylene wax.
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
Main Features: 100% duty cycle operation Energy-efficient performance Advanced control solution Service maintenance reminder Lower oil change costs
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
100% duty cycle operation; Energy-efficient performance; Advanced control solution; Service maintenance reminder; Lower oil change costs.
Electric welder, brand pr screw air compressors, pr permanent magnet synchronous motor air compressors, kaishan screw air compressors, kaishan permanent magnet synchronous motor air compressors, ganey scroll compressors, refrigerated air dryer, air filter, air tank, lubricating oil and various types of spare parts for air compressors.
This is a professional-grade sewing machine built for precise and efficient stitching of insoles. Its advanced disc feed mechanism and automatic lubrication system guarantee smooth operation and superior sewing results. Ideal for insole/ stroble sewing, this machine combines performance, reliability, and ease of use. Disc Feed Mechanism: The machine features a unique disc feed mechanism that provides consistent and smooth fabric feeding. This mechanism ensures even and accurate stitching of insole materials, resulting in clean and professional-looking seams. Insole Stitching Capability: The machine is designed specifically for stitching insoles and excels in handling various materials used for insole construction, such as leather, fabric, and synthetic materials. It can sew through multiple layers and thick materials with ease, providing strong and durable seams. Auto Lubrication System: The built-in automatic lubrication system ensures that the machine's moving parts are properly lubricated always. This promotes smooth operation, reduces friction, and extends the machine's life span. Regular lubrication also minimizes the need for manual maintenance. Adjustable Stitch Length: The machine allows for easy adjustment of the stitch length to accommodate different sewing requirements. You can customize the stitch length to achieve desired seam tightness and appearance. Model No. BS-600 Sewing speed 1800 s.p.m Needle Type DPx5 Stitch Length 6mm Height of presser foot 33mm Dimension 430 x 450 x 365mm Weight 33 KG No. of Needles Single needle
Colloidal graphite by our company adopts international advanced processing technology, strict quality system, the production of high-quality colloidal graphite products, mainly used in lead-acid batteries, lithium-ion batteries, high temperature lubricant base, electric contact point alloys, chemical industry catalysts and other widely used. Variety: F S TF Performance: Excellent high lubrication, high conductivity, high adsorption and catalytic properties, high plasticity. Uses: Used as lead-acid battery plate, positive and negative electrode conductive agent of lithium battery, nickel-metal hydride, nickel-cadmium battery, light-sensitive battery, electric carbon brush, rubber, plastic filler, anti-static, electromagnetic shielding, anticorrosive coating, high-temperature lubricant base material, powder metallurgy carbon raw material, wireless electronics industry carbon film resistor raw material, electric contact point alloy, advanced metal alloy raw material, etc.
Hydraulic end assembly AH0501010500 AH35001-05.00 Hydraulic end assembly AH0801010500 AH34001-05.00 Hydraulic end assembly AH1001010500 AH33001-05.00 Exhaust filter assembly AH0501011400 AH35004-11.00 Exhaust filter assembly AH1001011900 AH33014-04.00 Cross head assembly AH0501010400 AH35001-04.00 Cross head assembly AH0801010400 AH34001-04.00 Cross head assembly AH1001010400 AH1001010400 Pinion shaft assembly AH0501010300 AH35001-03.00 Pinion shaft assembly AH0801010300 AH34001-03.00 Pinion shaft assembly AH1001010300 AH33001-03.00 Crankshaft assembly AH0501010200 AH35001-02.00 Crankshaft assembly AH0801010200 AH34001-03.00 Crankshaft assembly AH1001010200 AH33001-02.00 Power end lubrication assembly AH0501010600 AH35001-06B.00 Power end lubrication assembly AH0801010600 AH34001-06C.00 Power end lubrication assembly AH1001010600 AH33001-06C.00 Spray pump assembly AH0501010800 AH35001-08B.00 Spray pump assembly AH0801010800 AH34001-08B.00 Spray pump assembly AH1001010800 AH33001-08C.00 Random tool AH0501011500 AH35001-20.00A Random tool AH0801011400 AH34001-15.00A Random tool AH1001012100 AH33001-31.00A Sealing washer AH10010109 AH33001-09
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 3 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 808 (49) Maximum output hp(kW)/rpm at crankshaft 27hp/4500rpm (19.9kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Technical specifications Configuration 4-cycle, vertical, water cooled diesel engine Number of cylinders 2 Bore and stroke mm (in.) 70 x 70 (2.76 x 2.76) Displacement cc (cu. in.) 539 (33) Maximum output hp(kW)/rpm at crankshaft 18hp/4500rpm (13.2kW/4500rpm) Combustion system Direct injection Starting system Electric with emergency rope start Cooling system Direct seawater cooling by rubber impeller pump Lubrication system Forced lubrication with trochoid pump Generator AC dynamo built in flywheel Drive device Clutch type Dog type clutch Reduction ratio Ahead/Astern 1.846/1.846 Direction of rotation Clockwise viewed from propeller Lubrication system Oil bath Tilt up system AX-E manual AX-EP hydraulic Control device Engine speed control Remote control Clutch control Remote control Steering Remote control Transom installation Through bolts with nuts Fuel oil Diesel fuel with kerosene (Add lube oil, 30:1) Fuel oil capacity l(cu.in) 24 (1465)
Place of Origin Hubei, China Type Sleeper Drilling Machine Material Stainless Steel Dimensions (L x W x H) (mm) 420*500*1070mm Brand Name Linkage ENGINE 2 stroke petrol engine 1.42kW Max. drill diameter 20mm Drill speed â?¥350r/min Drill speed2 â?¤20s Weight 14kg NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits.
NZMZ-20 Portable Sleeper Drilling Machine This machine is light-weight and easy to use and has the purpose of quickly drilling wooden sleepers ensuring precision andmaximum safety for the operator. It is composed of: * 4-stroke petrol engine with valves at the top and special lubrication to work on 360�°; * High-strength speed reducer gears lubricated by special TK3 grease that guarantees excellent lubrication and long life; * Ergonomic handle with throttle lever and engine safety lock; * Safety system with centrifugal clutch; * Possibility of inserting a lever able to rotate the drill bit in case of blockage; * Quick coupling / uncoupling spindle of the drill bit. Optionally we can supply: * Drill bit protection and drilling depth regulator ; * Trolley with 3 wheels for different types of track gauge; * SleeperDrill Bits. Specification Modelï¼?NZMZ-20 Typeï¼?Sleeper Drilling Machine Materialï¼?Stainless Steel Dimensions (L x W x H)ï¼?420*500*1070mm ENGINEï¼?2 stroke petrol engine, 1.42kW Max. drill diameterï¼?20mm Drill speedï¼?â?¥350r/min Drill speedï¼?â?¤20s Weightï¼?14kg
Zig Zag Stitching Capability: The machine offers a wide range of zig zag stitch patterns, allowing you to add decorative touches, secure seams, and create unique designs. The zig zag stitch is ideal for finishing edges, appliqu�© work, and embellishments. Adjustable Stitch Width and Length: You have the flexibility to adjust the stitch width and length to suit your specific sewing requirements. This feature allows you to create precise and customized stitches, whether you are working on delicate fabrics or heavy materials. AutoLubrication System: The built-in automatic lubrication system ensures that the machine's moving parts are properly lubricated always. This promotes smooth operation, reduces friction, and extends the machine's life span. Regular lubrication also minimizes the need for manual maintenance. Flat Bed Design: The flat bed design provides a stable and spacious work surface, ensuring smooth fabric feeding and precise stitching. It offers a clear view of the sewing area, making it easier to guide the fabric and maintain accuracy. Speed Control: The machine comes with adjustable speed control, allowing you to set the sewing speed according to your preference and project needs. This feature ensures that you have full control over your stitching, even when working on intricate designs or delicate fabrics.
Spring dial scale 100 kg Bimetal steel. As you know, spring dial scale is a kind of metal (spring in specific) that shrinks at low temperature and stretches at high temperature. This characteristic of metal makes the scale become less precise. To counter this effect, BenThanh Scale mounted Bimetal steel leaf in the transmission lever to keep the scale operating precisely even under harsh temperature condition. At transmission lever joints, brass bushes are fitted up in addition to the use of lubricant help to prevent rust and minimize abrasion, thus enhance life-span of scale especially when scale is used in high humid environment. Protective pipes are also used to conserve lubricant and limit water and dust from getting into the joints. Inox Plate. Scale plate is made of inox (stainless steel). Loading frame. Loading frame is made of 5mm thickness steel to enhance longevity of the scale.
Product Description The TiborLight Fly Fishing Reels series was launched in 1999, to the delight of trout, bass and other light fly anglers. This series now features the ConstaLube System, an innovative drag design composed of a special felt and lubricant, producing constant lubrication for a totally smooth drag throughout the entire range of resistance. The Tibor Light Spring Creek CL, Tail Water CL, and Back Country CL Wide are designed with the same uncompromising standards as our time-tested Billy Pate and Tibor series. Suitable for 3 to 8 weight rods in both fresh and saltwater conditions, even the most fragile tippet can be fished with complete confidence. Their quality and construction, watch-like precision, and superb drag system will deliver unmatched performance against anything fron an 8 inch brook trout to a 30 lb. tarpon. Branch Office Shop Fishing Tackles Jl. Jend. Sudirman kav. 112 - 114 Jakarta - 12190 Indonesia
Spices, dehdrated onion, dehydrated garlic, dehydrated onion flakes, dehydrated garlic flakes, garlic powder, onion powder, turmeric finger, turmeric powder, teja chilli, bedgi chilli, 334 chilli, chilli powder, black pepper, black pepper grounded, black pepper powder, nutmeg, green cardamom, black cardamom, big cardamom, dry ginger, ginger powder, ginger cut, cumin, coriander, coriander powder, cumin powder, fennel powder, fennel, tamarind, seed less tamarind, chia seeds, quinoa seed, flax seed, sesame seed, mustard seed, pomegranate seed, basil seed, water melon seed, spices oils, essential oils, ajwain oil, rose oil, black seed oil, jojoba oil, castor oil, borage oil, camphor oil, clove oil, eucalyptus oil, lemon grass oil, and aloe very extract, ashwagandha extract, fenugreek extract, grape seed extract, curcumin extract, and many more , corn flakes, oats, muesli, mix fruit muesli, frosted flakes, cereals, and many more..
SiSiB® PC9270 Heptamethyldisilazane SiSiB® PC9270 is a colorless, corrosive and flammable liquid with ammonia like odor. Technical Data CAS No. 920-68-3 EINECS No. 213-061-5 Formula C7H21N2Si2 Molecular Weight 175.42 Boiling Point 148°C [760mmHg] Flash Point 27°C Color and Appearance Clear liquid with amine odor Density 25/25°C 0.739 Refractive Index 1.418 [25°C] Min.Purity 99.00% Applications SiSiB® PC9270 translucent silicone can be used as a Protective Agent in production of agriculture chemicals. Packing and Storage SiSiB® PC9270 heptamethyldisilazane silazane is supplied in net weight 140Kg steel drum. In the unopened original container SiSiB® PC9270 heptamethyldisilazane has a shelf life of one year in a dry and cool place. As one of food grade silicone manufacturers, we will provide kinds of related products for sale, anything you need, please contact us.
Description: 100% Export ---- Baby Rompers Fabric Name, Composition, Density, Weight: Fabric 100% Cotton 100% Katoen 100% Baumwolle 100% Bawe�?na 100% Bavina 100% Cotone 100% Algod�³n 100% Bavlna 100% Algod�£o 100%� Bumbac(See K-Label) Made For Country Name: Bangladesh Mane Label Picture: See Image Care Label Picture: See Image Price & Hang Tag Picture: See image Measurement Sheet: See Image Summary Sheet for Size & Colours: See Image Final Packing List: See Image Carton Picture: See Image Total Colors Name: 10 Size Range:62/68, 74/80/86/92 Total Quantity: 197,760Pcs FOB Price USD $ : $1.10 1pcs Payment Type: LC 2pcs pack shipment cancel Super intact goods