It is a ceramic rubber composite board, which can be fixed in the truck bucket because the hardness of the ceramic is higher than the metal, the rubber can play an excellent role in buffering.� It can� increase the life� of your transportation equipment by� 10 times. Ceramic mesterial 92% alumina Ceramic size �?20*8 mm cylinder ceramic liner Rubber wear liner size 500*500*20 mm Rubber wear liner size weight About 17.2 kg/piece Sample time 1-5 days 92 Alumina Ceramic Liners Al2O3:â?¥92% Density:â?¥3.6g/cm�³ Porosity:ï¼?0.25 compressive strength:â?¥1050Mpa Rockwell Harndess â?¥85.5HRA Vickers Hardness Hv20: â?¥1050Mpa Fracture Toughness(KIC): â?¥3.7MPa.m1/2 Bending strength: â?¥220Mpa Wear Volume:â?¤0.25cm3 Appearance: white Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Good Wear Resistance 1 Super wear-resistant alloy's hardness HRC 56, have good wear resistance and thermal stability. 2 Good shock resistance, metal bonding properties, thermal shock resistance 3 Good heat resistance and corrosion resistance 4 The composite of low cost and good quality 5 Transportation, installation and easy to use
Rubber wear liner size 500*500*32 mm Rubber Ceramic Wear Resistant Liner Supplier Ceramic mesterial 92% alumina With or without bolts Without Ceramic size Cylinder �?20*20 mm Rubber thickness 8 mm Steel plate thickness 6 mm Seam tolerance 3�±1mm Rubber wear liner size weight 29.6 kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Applications: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries. If you want to get a quick quote, please send us these details: 1.Sample quantity, bulk order quantity 2. Application industry 3.Target price 4. Sample shipping address 5. If you need customization, please send us the specific composition, size and drawing
Rubber wear liner size 500*500*32 mm Ceramic mesterial 92% alumina With or without bolts Without Ceramic size Cylinder �?20*20 mm Rubber thickness 8 mm Steel plate thickness 6 mm Seam tolerance 3�±1mm Rubber wear liner size weight 29.6 kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Applications: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries. Rubber wear liner size 500*500*10mm Ceramic mesterial 92% alumina Bolts Without Ceramic size 20*20*6mm Rubber thickness 4mm Seam tolerance 3�±1mm Rubber wear liner size weight 6.8kg/piece Sample time 1-5 days Other size for your reference: 300*300*8mm 515*515*8mm 500*500*10mm 400*200*14mm 302*302*15mm 300*300*10mm 500*500*15mm 291*288*18.5mm 500*500*20mm 500*500*29mm 500*500*50mm 300*300*63mm 500*250*95mm 500*500*28mm 500*400*30mm 500*100*30mm 500*500*50mm 500*500*20mm 390*190*25mm 300*300*33mm 415*240*32mm 292*444*32mm 500*500*32mm 390*190*63mm 390*390*63mm
Rubber wear liner size 500*500*10mm Ceramic mesterial 92% alumina Bolts Without Ceramic size 20*20*6mm Rubber thickness 4mm Seam tolerance 3�±1mm Rubber wear liner size weight 6.8kg/piece Sample time 1-5 days Product description: Also named wear cermaic parts, wear rubber ceramic plate, wear resistant ceramic pads. Ceramic rubber composite pads&plate is use of rubber vulcanization process, to embed the wear-resistant ceramic vulcanized into rubber, stick it on the inner all of equipment with the adhesice paste.As customers' requirment, it also can be vulcanized together with steel plate, with bolts or not. Features: It combines wear-resistance of ceramic of ceramic and impact-resistance of rubber, apply to conveying systems equipment work under normal temperture,and can bear some impact. Impact-resistant and wear-resistant ceramic rubber composite lining board (three-in-one lining board) is mainly used in the thermal power industry (falling coal pipe lining board), the steel industry (blast furnace hopper, cylindrical mixer), the cement building materials industry (clinker clinker) Chute), smelting industry (hopper), machinery industry (hopper), coal industry (transportation station chute), mining industry (initial break, medium and fine breakage, transfer chute hopper), chemical industry (chute), organic silicon industry (level two) Heavy-duty cyclone dust collector), coal chemical industry (falling coal pipe), port terminal (ship unloader hopper), commercial industry (mixer liner), automobile manufacturing and other heavy-wearing industries.
Size: 300*300*8mm,515*515*8mm,300*300*10mm,500*500*63mm,390*190*25mm, 495*435*30mm 146*300*32mm, 240*240*32mm etc. The wear-resistant ceramic plate is special corundum ceramic with AL2O3 as the main raw material, rare metal oxide as the flux, and a high-temperature roasting of 1,700 Baidu. Therefore, the wear-resistant ceramic plate has the characteristics of high-temperature resistance, acid and alkali corrosion resistance, and good wear resistance. It is widely used for anti-wear of mechanical equipment and is also widely used for anti-wear of steel pipes, power plants, chemical industry, cement building materials industry and other systems. The following is a detailed introduction to the application of wear-resistant ceramic plates in steel mills: Raw material feeding system: belt head hopper, belt head hopper, trolley tee bucket, and feed hopper. Batching system: mixing silo, primary mixing cylinder, secondary mixing cylinder, mixing disc, pelletizing disc. Sintering material conveying system: beneficiation hopper under the vibrating screen, long-distance beneficiation hopper, silo. Dust removal and ash discharge system: dust removal pipe, elbow, tee, dust falling pipe, and tail dust removal pipe. Coking system: coke hopper. Iron-spraying coal injection system, medium speed mill: cone bucket, separation baffle, outlet pipe, pulverized coal pipe, and burner cone. Steel ball mill: outlet pipe, coarse powder separator, fine powder separator, coal powder pipe, elbow, inner shell of powder discharge machine. Steel rolling workshop: slag flushing pipeline.
Vulcanized rubber parameters- No Item Unit Test result 1 Hardness Shore A 57 2 Adhesion of ceramic rubber kN/m 3.8 3 Steering strength MPa 10.6 4 Elongation at break % 468 5 Permanent Deformation % 17.8 - Square tile: 10x10x3~10mm, 17.5x17.5x3~15mm, 20x20x3~15mm, etc. - Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc. - Hexagonal tile: S12.5xT3~20mm, S23.5xT6-25mm - Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples) - Ceramic Block: 40x40x40mm, 45x45x50mm,32x32x22mm, 38x38x38mm,etc. - Ceramic Cylinder/rod: 6x6mm,15x15mm,20x20mm, 31x31mm,40x40mm, 45x50mm, 50x50mm etc.
Activated Alumina Ball For Air Dry , H2o2 Production,desiccant 100% Original Material, No Recycle
Category CH90 CH92 CH95 Density 3.50 3.60 3.65 Al2O3 90% 92% 95% ZrO2+Y2O3 / / BendingStrengthMPa 180 220 250 CompressionstrengthMPa 970 1050 1300 FractureToughnessMPam1/2 3.5 3.7 3.8 HVHardnessN/mm2(MPa) 900 950 1000 WearVolume 0.28 0.25 0.20 Different kinds of products: Ceramic Mosaic Pieces, Ceramic Pipe Tiles, Ceramic Curved Tiled(with or without holes), Ceramic Tapered Tiles, Ceramic Cylinders, Stell Lined with Ceramic Tiles, Irregular Shaped Tile, Clipping Ceramic Tiles Interlocking Bricks. We have so many kinds of sizes. And we are also accept customized. Mineral Processing equipment operates in some of the harshest and remote locations. It is crucial to the Mineral Processing industries that this equipment continues to operate efficiently and its lifecycle is maximized to minimize downtime. By appropriately protecting equipment from the extreme wear caused by the high speed and flow rates of ore when processed as a slurry ensures better equipment longevity. The slurry is highly abrasive and can not only cause wear damage to wet processing equipment but also with the inclusion of chemicals and heat, there is a constant risk of corrosion and dangerous leakage. Wear Protection ceramic Linings are used throughout Mineral Processing to protect the steel surfaces of equipment from wear and corrosion. They are used on a range of equipment including pipes, tanks, chutes, pumps, flotation cells, thickeners, launders, and feed spouts or chutes 92% 95% Abrasive Alumina Ceramic Wear Liner
Nano Ceramic Universal Restorative Magma NT Nano Ceramic restorative is visible light curing composite designed for use in anterior and posterior restorations. Magma NT is a low shrinkage composite with filters in combination of nano silica and zirconia filter Indications Direct anterior and posterior restorations Core build-ups Splinting Indirect restorations Product Benefits Easy handling due to high viscosity Very high wear resistance High polishability
1.HC series wear-resistant ceramic liners, 92 / T95 / ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate) Main products : 1.HC series wear-resistant ceramic liners, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate) 2. Alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball. 3.Three-in-one, Two-in-one vulcanized ceramic runner sheet, ceramic mending compound, ceramic lining cyclone, ceramic lining pipe. 4.Silicon Carbide Brick, Silicon Carbide Plate, Silicon Carbide Nozzle. 5.Dry grinding ball mill, wet grinding ball mill, circulating stirring mill, ceramic ball grinding tank, etc.
The alumina ceramic tiles for vulcanization including: - Square tile: 10x10x2~10mm, 17.5x17.5x2~15mm, 20x20x2~15mm, 33x33x7~25mm, etc. - Ceramic Plate: 100x100x6~50mm, 150x100x6~50mm, etc. - Hexagonal tile: S12xT3~20mm, S19xT6-25mm - Dimple tiles: 20x20x4-10+1(with 5 dimples), 20x30x5~15+1(with 18 dimples), 20x20x5-10mm( with 13 dimples) - Ceramic Block: 40x40x40mm, 32x32x22mm, 38x38x38mm,etc. - Ceramic Cylinder/rod: 6x6mm,13x13mm,20x20mm, 31x31mm,50x50mm etc.
ID tolerances of +.010/ -.000 - Surface finish of 4 - 8 RMS - Hardness is HV 0.3 kg/mm 1100/1200 ( 92 - 94 Rc) - Good performance on the high temperature application - Liner sizes are available from 4½ to 7 for all popular mud pumps
Main products : 1.HC series wear-resistant ceramic liners, 92/T95/ZTA wear-resistant ceramic liner (alumina liner, zirconium toughed aluminum composite liner, zirconia plate) 2.Alumina ball, zirconium silicate ball, zirconia toughed alumina ball, zirconium ball), agate ball, polyurethane ball. 3.Three-in-one,Two-in-one vulcanized ceramic runner sheet,ceramic mending compound, ceramic lining cyclone, ceramic lining pipe. 4.Silicon Carbide Brick, Silicon Carbide Plate, Silicon Carbide Nozzle. 5.Dry grinding ball mill, wet grinding ball mill, circulating stirring mill, ceramic ball grinding tank, etc.
New wear resistant lining-ceramic rubber wear liner made by ZTA ceramic 300*300mm liner ceramic is Zirconia toughened alumina based ceramic ,six pcs 150*100*50mm Zirconia toughened alumina based ceramic This Zirconia toughened alumina based ceramic contains 20% Zirconia,other 80% is alumina ceramic is vulcanizated into 6mm rubber,6mm steel back is vulcanizated with rubber ZTA ceramic has better function than alumina ceramic which has competitive price as technical ceramic Support customized.
About our grinding ball : Alumina grinding ball 0.1-70mm (Rolled and Pressed) Zirconia alumina ball 0.5-13 mm Zirconium silicate ball 0.5-13 mm Cerium zirconium ball 0.4-3.4 mm Yttrium zirconium ball 0.1-30 mm Some questions need to be confirm with you: 1.May I know which kind of ball do you need? 2.How many in total do you need? 2.Are you buy for sell or self use? What industry do you use this product forï¼? 3.Do you have target price? 4.May I know your door address? Then we could send samples to you. Then our quotation will be send to you in 24 hours. Amy email:About our grinding ball : Alumina grinding ball 0.1-70mm (Rolled and Pressed) Zirconia alumina ball 0.5-13 mm Zirconium silicate ball 0.5-13 mm Cerium zirconium ball 0.4-3.4 mm Yttrium zirconium ball 0.1-30 mm Some questions need to be confirm with you: 1.May I know which kind of ball do you need? 2.How many in total do you need? 2.Are you buy for sell or self use? What industry do you use this product forï¼? 3.Do you have target price? 4.May I know your door address? Then we could send samples to you. Then our quotation will be send to you in 24 hours.
100*100*6-25mm etc. Support customzied. Wear resistant ceramic which are mainly composed of at least 90% Al2O3 are the most widely used in the world today. Our products are made from strictly selected alumina powder with uniform particle sizes and low CaO content.Wear resistant ceramics can be made through common dry press or isostatic pressing process and then sintering them at high temperature in the kiln. They are desirable lining materials for high wear equipment due to precise dimensions, high density,high alumina content,good flatness and stable quality.
BN Boron Nitride is often referred to as white graphite because it has a microstructure similar to that of graphite. However, unlike graphite, boron nitride is an excellent electrical insulator that has a higher oxidation temperature. It offers high thermal conductivity and good thermal shock resistance and can be easily machined to close tolerances in virtually any shape. After machining, it is ready for use without additional heat treating or firing operations. In inert and reducing atmospheres, BN will withstand temperatures over 2,000°C. It is commonly used as an insulator in contact with tungsten and graphite electrodes at those temperatures. All Boron Nitride grades can be used in oxidizing atmospheres up to 750°C. It is not wet by most molten metals and slags and can be used in contact with most molten metals including aluminum, sodium, lithium, silicon, boron, tin, germanium, and copper. Boron Nitride is available in a variety of solid grades, differentiated by binder and composite: BN-2000, BN-2300, BN-2800, BN-3000...
Hexagonal Boron Nitride has the same type of layer structure as graphite and provides a very good lubrication/mold-release characteristic. BN is stable up to approximately 2000°C in the inert atmosphere.Besides, Boron Nitride is stable against most organic solvents and corrosive chemicals, and unwettable by most molten metals and glasses. Boron Nitride has high electrical insulation and voltage resistance at high temperature and no changes in permittivity and dielectric loss up to high-frequency area. As for its lubricity and mold-release efficiency, friction coefficient of Boron Nitride does not change up to considerably high temperature in nitrogen atomosphere, which enables use up to approximately 950°C in the air. What's more, because of high thermal conductivity and high heat radiation, BN can be applied to various kind of heat radiators.
