Admiralty Brass Tubes For Evaporators &Amp; Coolers STANDARD: BS, ASTM, DIN, JIS, IS Product Application Areas: Heat Exchangers, Refineries, Power Plants, Desalination Plants, Ship Building & Ship Repairs, Condensers, Ferrules and Distillers. Characteristic: A Copper Zinc Alloy containing tin and small amount of Arsenic, which is added as an inhibitor against dezincification. The pressure of Tin imparts to the alloy good corrosion resistance in a moderately polluted river water and clean seawater, either stagnant or slow moving (up to about 2 meters/sec.). The most common and wrought form is tube for heat exchange equipment. Guide to the selection of tube material: Clear River, Lake or Canal Water. a. Dissolved salts more than 2000 ppm.b. Chloride less than 20 ppm.c. H2S and Ammonia is less than 1 ppm.d. Suspended solids less than 25 ppm.e. For temperature more than 2000C and less than 4500 C.Permissible average velocity of water 1.8-2.0 meters/sec.
A Copper and Zinc Alloy containing small amount of Arsenic. This is added as an inhibitor against dezincification. The alloy exhibits a good combination of strength and ductility and is commonly selected whenever excellent cold working properties, bright finish and relatively low cost are desirable. Severe environment must be considered to predict corrosion behaviour. The alloy is often used for variety of deep drawn components.
Cupro Nickel Rods 95/5, 90/10 & 70/30
Product description: An elbow is a type of plumbing or piping fitting intended to join a piece of pipe and another fitting at an angle. When we have to change the direction of the pipe, copper elbows comes handy which have a close radius to fit in the tightest possible space.
Level Wound Coil by Ruby Copper was designed for manufacturers of air-conditioners and freezers. Widely approved by industry leaders of HVAC, both domestically and internationally.
Brass Rectangular Tubes Abc Tube Company is one of the leading manufacturers, exporters and suppliers of a complete line of Brass Square Tubes. These are manufactured by adept technicians in accordance to the set domain guidelines & norms to ensure excellent performance, durability, rugged construction, reliable operation and corrosion resistance. Available in both standard & customized forms, our Brass Square Tubes are affordable in prices and find usage in diverse industries across the globe. Application Utilities Water Chemical Handling Food Products Gas Handling Drinking Water General Engineering
Rods They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%). Dimensions Rod Size (Dia x Length) Actual Rod Dia "S" Thread Dia "T" Cat No. 9.5 x 1200 (Un-Threaded) 9.5 - HBR-012 9.5 x 1800 (Un-Threaded) 9.5 - HBR-018 14 x 1200 12 14 HBR-1412 14 x 1500 12 14 HBR-1415 14 x 1800 12 14 HBR-1418 14 x 2000 12 14 HBR-1420 14 x 2400 12 14 HBR-1424 5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-112 5/8 x 5'' OR 16mm x 1500 14.2 5/8" HBR-115 5/8 x 6'' OR 16mm x 1800 14.2 5/8" HBR-118 5/8 x 8'' OR 16mm x 2400 14.2 5/8" HBR-124 5/8 x 10'' OR 16mm x 3000 14.2 5/8" HBR-130 5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-312 5/8 x 5'' OR 16mm x 1500 16 5/8" HBR-315 5/8 x 6'' OR 16mm x 1800 16 5/8" HBR-318 3/4 x 4'' OR 19mm x 1200 17.2 5/8" HBR-212 3/4 x 5'' OR 19mm x 1500 17.2 3/4" HBR-215 3/4 x 6'' OR 19mm x 1800 17.2 3/4" HBR-218 3/4 x 8'' OR 19mm x 2400 17.2 3/4" HBR-224 3/4 x 10'' OR 19mm x 3000 17.2 3/4" HBR-230
Copper Tubes (Air Conditioning Systems And Refrigeration Systems) The Copper tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years. This is in large measure due to the inherent properties of the copper metals and their unique abilities to meet the needs of the ACR industry. Stringent new requirements, including demands for increased operating efficiency and the reduction or elimination of harmful emissions, have led to a new appreciation for copper tube''s role in product enhancement.
Coils: As stockist of stainless steel products, we also provide steel coils for various industrial and other usages. They are available in various dimensions as required for the end purpose. Pipes: Apart from other things, we also provide steel pipes according to the technology like seamless and ERW. They are used in a number of industries like sewage and water and any other use. Strips: Stainless steel stripes are useful in manufacturing industries where steel strips are required to join hinges. These stripes have also found way in packaging of heavy industries. Rods: We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant. Tubes: We offer stainless steel tubes in variety of requirements like stainless steel tubes and stainless steel pipes as proposed by the clients. The tubes are choices in shapes like, round, oval, rectangular and square tubes. Tubes are also available according to finish and usage.
Produced specifically for the industrial air conditioning system, the industrial copper tube Class 0 is a superior product line of Abc Tube Company which is suitable for the R410A, R32, withstand high working pressure. The industrial copper tube Class 0 is in conformity with the American standard ASTM B280 for Air Conditioning and Refrigeration Field. The minimum thickness of the product is 0.81mm for the tube with OD: 6.35mm, 9.52mm v 12.70mm and is 1.00mm for the tube with OD: 15.88mm, 19.05mm. Packing: Each coil is packed in one single bag with grain moisture inside. The copper tube is printed with the companys name: along with the size and ASTM B280 standard.
We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant.
We understand the technicalities of working with copper, a softer metal than steel, and one that requires some extra skill in fabricating busbars. With our prototyping capability, we can usually provide samples of busbar, copper busbars and electrical busbar for evaluation. Our copper also finds numerous uses in electrical industries. Some of the properties of copper used in this application are listed below - Copper Alloy No. Temper Desi. Thickness Tensile Stren. (N/ mm2) Hard ness HV Bend Test Over Upto & incl. Transverse Longitudinal C-1100 Annealed 0.5 mm 10 mm 210 Angle Radius Angle Radius Half Hard 0.5 mm 2.0 mm 240 55max 180 Close 180 Close Half Hard 2.0 mm 10.0 mm 240 70-95 180 - 180 - Hard 0.5 mm 2.0 mm 310 70-95 180 - 180 - Hard 2.0 mm 10.0 mm 290 90min 90 - 90 - 90min 90 - 90 Chamfering Radius Thickness Chamfering Radius 2mm (min) / 5mm (max) 0.8 5mm (min) / 8mm (max) 1.2 8mm (min) / 30mm (max) 1.6 Physical Properties No. Temper Description. Conductivity % (20C) C1100 0 C1100BB-0 100% (min) 1/4H C1100BB-1/4H 95% (min) 1/2H C1100BB-1/2H 98% (min) H C1100BB-H 97.16% (min) Chemical Properties No. Purity Oxygen Content. Cu PPM C11000 99.90 (min) Upto 250 ppm
We are dealing in the finest quality of copper tubes, which are used in the installation of medical gas pipeline systems. As we all know the medical gas pipeline system is the most crucial system of a hospital, keeping this in consideration, it should be well planned and designed following the proper international standards. Our piping products are one of the finest quality in the nation including the latest technology, we can assure a lifetime hassle free copper piping solutions to our users. Moreover we also ensure better pricing and at the same time zero room for error. So we rightly say, "Where quality matters the most, we care atmost." To ensure a double check on our quality we have a various unique standards for its compliance. Each and every pipe has a unique marking on every 500mm of the pipe length. This usually consists of the size, thethickness, the length and EN certified unique code, which is EN13348. To offer a safe provision of medical gases, we bring forth high efficiency Medical Gas Pipeline System. Our Medical Gas Pipeline is perfect to transfer the gases from one place to another, as it overcomes the problems pertaining to the use of cylinders. Only high quality materials are used for the manufacturing of pipes of our Medical Gas Pipeline System. We are counted among the dominant Gas Pipeline Suppliers based in India. Material Quality Solid drawn Seamless Deoxidized Non-arsenical Half hard Tempered Degreased Conforming to HTM 2022 standards Specifications Fittings used for connecting copper tubing are made of Copper and brazed type Connection as per BS: 864: Part 2:1983 All pipe-jointing fittings are made of Copper as per BS 864 Standards and suitable for a steam of working pressure of 17 bars and especially made for brazed socket type connections. Shut off valves suitable for the pipe diameter are of non lubricated 90�° turn lever & having stainless steel hard chrome brass body with PTFE seat and S.S. ball. Sizes will be appropriate for copper pipes with screw threaded ends and brass adapter.All valves are pneumatically tested for twice the working pressure and degreased for medical gas service before supply. Features Cost effective Convenient Alarm system for timely detection Endurance against high pressure Easy to maintain
Brass round pipe, brass square tube, brass rectangular tube, naval brass tubes, brass admiralty tube and pipes. copper tubes, copper fittings, copper medical gas pipe, copper sheets, ceiling fans, heaters, immersion rods, heating elements, geysers..
80% New Zealand Wool 20% Nylon Fire Resistant Carpet Detailed Product Description Shape : in rolls Material : 80% New Zealand Wool 20% Nylon Style : Jacquard , plain Technics: Machine Woven Use: Bedroom, Commercial, Home, Hotel, Theme Restaurant Size: 3.66/4m Color : Max. 16 Colors Customized : Yes Sample : For Free Advantage : More Than Ten Years Experience Backing: PP, Jute Ect Pile Height : 7mm Feature : Anti-Bacteria Port : Shanghai Place of Origin : Shanghai, China (Mainland) Payment & Shipping Terms: Minimum Order Quantity : 100 Square Meter/Square Packaging Details : Roll up to woven bag Supply Ability: 4000 Square Meter/Square Meters per Week
Rug, Carpet Store, Oriental Rug, Oriental Carpet, Oushak Rug, Oushak Carpet, Persian Rug, Moroccan Rug, Modern Rugs, Blue Rug, Antique Rugs, Vintage Rugs, Contemporary Rugs, Square Rugs, Mid Century Modern Rugs, Persian Carpet, Art Deco Rug, Indian Rugs, Scandinavian Rugs, Tabriz Rug, Antique Oriental Rugs, Oversized Area Rugs, Khotan, Extra Large Rugs.
Name: Commercial grade tufted Nylon wall to wall Carpet Detailed Product Description Material : 100% Nylon yarn Dyeing method : solution dyed Technic: machine tufted Style : Plain , Jacquard Pattern : Multi-structure like cut pile , Loop Pile , textured loop pile Technics : Machine Tufted Face weight: 1000-1300 gsm Height: 6.5-7 mm Use: Bedroom, Home, Hotel, Toilet, Office Usage : Reception,Corridor, bedroom ,hallways , Sample :Available Advantage : Non-fading,Comfortable Feature : Corrosion-Resistant Color : in stock Port : China main port Minimum Order Quantity : 300 Square Meter/Square
Machine made tufted Nylon solution dyed wall to wall Carpet For commercial areas Detailed Product Description Material : 100% Nylon Style : Plain , Jacquard Pattern : Multi-structure like cut pile , Loop Pile , textured loop pile Technics : Machine Tufted Face weight: 1000-1300 gsm Height: 6.5-7 mm Use: Bedroom, Home, Hotel, Toilet, Office Usage : Reception,Corridor, bedroom ,hallways , Sample : Available Advantage : Non-fading,Comfortable Feature : Corrosion-Resistant Color : in stock Port : China main port Minimum Order Quantity : 100 Square Meter/Square
Plant Type:Grass Material: PP +PE Gauge:3/16,3/4",3/8", Pile height:10-40mm Density:14700 tufts/square Meter Backing:PP+ Net+ SBR Latex Size:4*25m/2*25m Application:Garden,Outdoor,Leisure,landscape, Usage:Multi-use like Hotel, Restaurant, Playground, Soccer, Backyard, Porch, Tennis, Terrace, Residential Material:Plastic
Machine Woven Wool Axminster Carpet Description of goods Material: 80% wool / 20% nylon yarn , 100% nylon yarn Technics: Axminster gripper Construction:Cut pile Design: plain , Jacquard style Color frame: up to 16 Pile height :7 mm, 8 mm, 9 mm, 10 mm, Density : pitch by rows 7*7, 7*8, 7*9, 7*10, 7*11, 7*12 Backing: warp by polyester /coloton and wweft by Jute or pp Colors: ARS Color system and customized color is also ok Width:3.66m(12ft) or 4m (13.12ft) OEM : YES Fire Rating: Passed Bf1-s1, t1 Using areas:Suite, Room, Corridor, Meeting Room, Casino, Restaurant, Public Areas Mock -up room policy: We accept orders for mock up room with a quantity of less than 100 square meters per design , and the price terms are negotiable. Similarly, a single design drawing and the qt'y of carpets within 100 square meters are equivalent to the policy of ordering a mock up room .
