We supply Kosso wood (Rosewood), roughly sawn with bark, and high quality clean sawn without bark from West Africa. Our current specification; Kosso Wood (Rosewood) 100 pcs in 20 ft container. 100 to 110 pcs in 20 ft container 110 to 120 pcs in 20 ft container 120 to 130 pcs in 20 ft container 130 to 140 pcs in 20 ft container 140 to 150 pcs in 20 ft container Rose Wood (Kosso), Rough Square Specification:: BOTANICAL NAME PTEROCARPUS ERINACEUS Length 2.1m & up Width 20cms & up Thickness 20cms & up No. of Pcs per 20ft Container: 80 to 100 pcs, 101 to 130 pcs & 131 to 160 pcs Weight per 20ft Container: Approx 20 - 21 MT & up Origin: Benin Delivery: 7 days for ready goods
Ceramic/Glass Material Hybrid Material Lamination Buried Capacitance/Resistance PTH/NPTH Step Slots Uneven/Segmented/Step Gold Finger Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
2-24 Layers Book/Air-gap/Fly-tail Unsymmetrical/Semi-Flex Width of Flexible Zone 3mm(min) Dimension Accuracy �±0.05mm(min) Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
Thermal Conductivity 1-398W/m.K Aluminum/Copper AC 500-4000V Post-bonding/Pre-bonding Sweat-Soldering/Conductive Adhesive Press-Fit/Embedded Coin(I, T U) Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
More than 85+ Types Rogers/Arlon/Taconic/Isola/ Nelco/F4B Serices,etc Materials can be Specified Impedance Tolerance �±5%(min) Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
Blind/Buried Via 5+N(N+M)+5 Structure Trace Width/Spacing 1.6/1.6mil Laser Hole Size(mm) 0.075 High Density Interconnector Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
Up to 64 Layers FR4 TG135/TG150/TG170 Halogen Free/CTI 600 Aspect Ratio (Finish Hole) 28:1 Sample Expedited 8 Hours(1-2Layer) Founded in 2007, PEAK Co.,Ltd is an electronic solutions company offering 1-64 layers PCB fabrication, assembly, testing & validation of rigid, rigid-flex, HDI, high frequency, high speed, metal core, IC substrate, substrate-like and other special PCB. Our modern 54,000 square foot manufacturing facility allows us to provide all rigid & rigid-flex services under one roof and offer quick-turn capabilities.PEAK has a professional reputation for developing high-performance solutions for technically advanced OEM's in a variety of markets including aerospace and defense, medical, computer, communication, server, semiconductor IC, automotives, industrial control, optoelectronics, LED and others.
High strength casting, high stiffness, high precision and long life. The guide rail and work table surface are quenched, tempered and hardened, and are ground. The guide rail is bonded with high wear-resisting Turcite-B plate. The enhanced Z-axis, X-direction dovetail guide and Y-direction square guide have stronger bearing capacity and higher accuracy. GM-4S Milling machine High precision and durable spindle.The axial runout of spindle pin gap is controlled at 0.002mm-0.005mm. high cycle hardening treatment of spindle tube surface, hard coating, precision grinding, spindle and housing. The bed column adopts double-layer reinforcement structure to ensure the high rigidity and no deformation of the Milling machine.
Anchor Grip an innovative composite plastic waterproofing membrane is made up of a flexible composite plastic membrane sheet with uniquely designed closely spaced L-shaped anchor grips. This serves to firmly bond the membrane with the concrete surface during the casting of concrete and leaves no gap for water penetration. They are made in a straight and square grid design to create locking extensions for the membrane. It is the most trustworthy and effective waterproofing membrane because even if the membrane is damaged, the water will be blocked between the L-shaped grips and won't allow to spread underneath the membrane. Also, an Innovative Anchor Grip basement waterproofing membrane is very affordable, simple, and quick to install. It provides 100% waterproofing guarantee with extended durability and can reduce waterproofing costs by almost 50% when compared to other conventional systems.
Name Email Address Message Submit SEND US MESSAGE CO2 laser machine STL1309A Contact Us å?¾ç??æ??è¿° å?¾ç??æ ?é¢? å?¾ç??æ??è¿° CO2 laser machine STL1309A â?¹ CO2 laser machine STL1309ACO2 laser machine STL1309ACO2 laser machine STL1309A â?º Machine Featuresï¼? CO2 laser machine 1300x900mm working size. EFR F6 CO2 laser tube (Options power: F2,F4,F8; Options brand: Reci, Weiju) Square guide Red dot location Ruida 6442S control system Blade worktable+Honeycomb worktable Application: Acrylic, Plexiglas, Double color plate, Wood, Bamboo, MDF, leather, fabric, Paper, Cardboard, Chipboard, Press Board, Stone, Ceramic, Granite, Marble, Rubber, etc
Name Email Address Message Submit SEND US MESSAGE CO2 laser machine STL1309A Contact Us å?¾ç??æ??è¿° å?¾ç??æ ?é¢? å?¾ç??æ??è¿° CO2 laser machine STL1309A â?¹ CO2 laser machine STL1309ACO2 laser machine STL1309ACO2 laser machine STL1309A â?º Machine Featuresï¼? CO2 laser machine 1300x900mm working size. EFR F6 CO2 laser tube (Options power: F2,F4,F8; Options brand: Reci, Weiju) Square guide Red dot location Ruida 6442S control system Blade worktable+Honeycomb worktable Application: Acrylic, Plexiglas, Double color plate, Wood, Bamboo, MDF, leather, fabric, Paper, Cardboard, Chipboard, Press Board, Stone, Ceramic, Granite, Marble, Rubber, etc
Name Email Address Message Submit SEND US MESSAGE CO2 laser machine STL1309A Contact Us å?¾ç??æ??è¿° å?¾ç??æ ?é¢? å?¾ç??æ??è¿° CO2 laser machine STL1309A â?¹ CO2 laser machine STL1309ACO2 laser machine STL1309ACO2 laser machine STL1309A â?º Machine Featuresï¼? CO2 laser machine 1300x900mm working size. EFR F6 CO2 laser tube (Options power: F2,F4,F8; Options brand: Reci, Weiju) Square guide Red dot location Ruida 6442S control system Blade worktable+Honeycomb worktable Application: Acrylic, Plexiglas, Double color plate, Wood, Bamboo, MDF, leather, fabric, Paper, Cardboard, Chipboard, Press Board, Stone, Ceramic, Granite, Marble, Rubber, etc
Overall Dimension(L*W*H): 7500*2500*1496mm ( or customize ) Loading Weight: 60t Axle :13T 2/3/4 pcs, BPW or FUWA or Yonglitai or Huajin etc. Suspension system: Mechanical / air / single point suspension Main Beam: Q345 Carbon Steel. Beam height is 500mm,upper plate 14mm,down plate is 16mm,middle plate is 6/8 mm Side Beam: 16#/18# channel steel (Q235) Platform plate: 3mm checker Plate Turntable: 1 pcs, Diameter is 1100mm Traction hook: DN50 Traction bar: 4*4 or 4*6mm square tube Container Twist Locks: 4 / 8 /12pcs (Lifting type or Twist Screw Type)
Copper, Brass & Bronze Wire Mesh Applications: Pharmacy, metal power filtration and separation; ceramic printing and shielding etc. Raw material: Copper Brass: H65, H80, Phorsphor Bronze Csn6.50.4. Weaving Patten: Square mesh, Plain Weave, Twill Weave. Copper Wire Mesh Copper Wire Mesh has a high percent of copper. It is normally used in a corrosion application where brass is not suitable. Phosphor Bronze Wire Mesh Due to its physical properties phosphorous bronze wire mesh is ideal for weaving. It has a wide range of applications including filtration, to screening. Phosphorous Bronze Wire Mesh is stronger than brass and can withstand a great deal of cold working. Brass Wire Mesh This is a non-rusting material and is used in some industrial and architectural applications
Copper, Brass & Bronze Wire Mesh Applications: Pharmacy, metal power filtration and separation; ceramic printing and shielding etc. Raw material: Copper Brass: H65, H80, Phorsphor Bronze Csn6.50.4. Weaving Patten: Square mesh, Plain Weave, Twill Weave. Copper Wire Mesh Copper Wire Mesh has a high percent of copper. It is normally used in a corrosion application where brass is not suitable. Phosphor Bronze Wire Mesh Due to its physical properties phosphorous bronze wire mesh is ideal for weaving. It has a wide range of applications including filtration, to screening. Phosphorous Bronze Wire Mesh is stronger than brass and can withstand a great deal of cold working. Brass Wire Mesh This is a non-rusting material and is used in some industrial and architectural applications
Overall Dimension(L*W*H): 7500*2500*1496mm ( or customize ) Loading Weight: 60t Axle :13T 2/3/4 pcs, BPW or FUWA or Yonglitai or Huajin etc. Suspension system: Mechanical / air / single point suspension Main Beam: Q345 Carbon Steel. Beam height is 500mm,upper plate 14mm,down plate is 16mm,middle plate is 6/8 mm Side Beam: 16#/18# channel steel (Q235) Platform plate: 3mm checker Plate Turntable: 1 pcs, Diameter is 1100mm Traction hook: DN50 Traction bar: 4*4 or 4*6mm square tube Container Twist Locks: 4 / 8 /12pcs (Lifting type or Twist Screw Type)
Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter) is widely used in industry of Ship Building, Construction Equipment, Transport Equipment, Aerospace Industry, Bridge Building, military industrial, wind power, Structural Steel, Boiler containers, Agriculture Machinery, Chassis electrical cabinets, Elevator manufacturers, Textile Machinery and so on. Features of Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter): 1. Three torch: plasma torch , gas/flame torch, marking torch for different materials. 2. TORCH HEIGHT CONTROLLER--The numerical control system with high disposes, the automatic striking arc, the performance is stable. STARFIRE cutting system panel, Auto Initial Height Sensing, Arc Voltage Divide etc, can cut different thickness, automatic height control, easy operation, high efficiency. 3. Blade and saw working table for choose, support heavy metal with high stability. 4. High precision square rail, and rack gear. 5. HUAYUAN plasma power supply(USA HYPERTHERM for optional),excellently performance, low failure rate, more secure. 6. Stepper motor (servo for optional) cooperate with precision machinery transmission system, faster and more stable, higher cutting efficiency. Affordable 5*10 feet CNC plasma and gas/flame cutting machine (CNC plasma cutter): Working area 1300*2500mm, 1500*3000mm, 1500*6000mm (can be customized) Transmission High precision Rack Gears, Ball Screw X, Y, Z Rail Square Rail Cutting Thickness 0-30mm, plasma cutting 8-200mm,gas /flame cutting Cutting Speed 0-12000m/min Plasma Generator 63A (more optional 120A,160A ,200A) Motor Stepper motor(servo motor optional) Control system STARFIRE, FANGLING, Document transmission form USB interface Working voltage 3 phase 380V 220V 50HZ/60HZ Software CAD, FASTCAM,ARTCAM
Cooling Tower Spray Nozzles The nozzle of cooling tower is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method, hot water evenly distributed to the top of packing, can achieve full heat dissipation effect, can be widely used in circular and square counter flow tower. As a professional cooling tower spray nozzle manufacturer, we offer different types of water distribution spray nozzles for cooling towers. You can choose what you need from the following products. WHAT IS A COOLING TOWER NOZZLE? Cooling tower nozzles direct the hot water in need of cooling to the tower fill. These provide the water sprays to wet the fill. Uniform water distribution at the top of the fill is essential to achieve proper wetting of the entire fill surface. Nozzles can either be fixed in place and have either round or square spray patterns, or can be part of a rotating assembly as found in some circular cross-section towers. Cooling tower nozzles disperse water across the heat exchanger. They are usually made of PVC, glass or ceramic. Some nozzles are high-temperature resistant and have a non-clogging design. Cooling tower nozzles come in both cross flow and counter flow designs. SOME BENEFITS OF COOLING TOWER NOZZLES Non-Clogging Low Pressure Design Operational Adaptability Efficient Performance Virtually Maintenance-Free Unique Solid Cone Spray Ensures Consistent Distribution Easy Installation & Very Reliable Evenly Distributes Water Comes In Both Spray And Target, With Or Without Grommets
Hangzhou Yanpa Cosmetics Co.,Ltd is a subsidiary company of zhejiang cosmetics manufacturer in China which supply OEM and ODM for makeup brands. We have been specializing in the R&D and production of cosmetics for 14 years. The production base covers an area of more than 32,500 square meters, the first phase has been put into use more than 12,500 square meters, the factory has more than ten modern production lines, 10,000 class dust-free purification laboratory, 100,000 class dust-free purification workshop, imported test and manufacturing equipment, international standardized production management. Our factory has 14 modern production lines, 10W class super purification production workshop, 1W class dust-free purification laboratory, 10W class dust-free purification filling workshop, full central air conditioning system, imported testing and manufacturing equipment. R&D database already has tens of thousands of proven formulas. It also has three independent workshops for skin care, color cosmetics wax base and color cosmetics powder. The factory adopts international excellent management standards to achieve precise, efficient and process-oriented management; perfect quality management and strict testing system ensure the quality of final products, improve product quality while reducing unit energy consumption,achieve energy saving and emission reduction, and implement the company's environmental protection concept to build a green enterprise. With GMPC and ISO22716 certifications, and welcome new formula manufacturing for your beauty industry. Our OEM & ODM Color Cosmetics Products are mainly following: eyeshadow palette, liquid eyeshadow, eyeliner, mascara, eyebrow, lipstick, lip gloss, lip balm, lip liner, lip scrub, foundation, concealer, contour and bronzer, blush and highlighter, powder, nail polish and make up tools etc.
3. Main technical parameters 3.1. Y-axis movement range: 130mm 3.2. X-axis movement range: 150mm 3.3. Spacing between two marking columns: 270mm 3.4. XY axis drive method: electric drive 3.5. Z-axis click method: motor driven 3.6. Click power: 500gf or customize weights according to customer requirements. 3.7. Striking force: 500gf or customized weights according to customer requirements. 3.8 Click speed: 10-100 times/minute 3.9. Scratch speed: 30-2000mm/min 3.10. XY torque: 8.0Nm 3.11 Testing station (linkage): 2 3.12 Control functions: A. Digitally set running speed (X/Y/Z axis) B. Digitally set running displacement (X/Y axis) C. Counting value display setting: 0~999999, any setting, power off memory D. Line drawing method: long (square), straight line. 3.13. Shutdown method: automatic shutdown by counting values 3.14. Working voltage: 220VAC 50HZ 3A 3.15. W780 * D570 * H520mm 2ã?? Instrument Introduction 2.1 Product Usage Click marking tester is a special testing device for small consumer electronic products such as e-books, tablet computers, mobile phones, walkie-talkies and Electronic dictionary. It mainly performs durability tests on hand written screens and touch screens, such as grid drawing, clicking, and rubbing. 2.2 Equipment characteristics Using PLC control, simply select a starting point on the screen of the product to be tested, and then set the testing stroke in the device to run. This machine can perform four modes of testing: X-line, Y-axis line, XY axis square or rectangular, and Z-axis click. And it uses a stepper motor combined with a ball screw as the motion mechanism, with accurate positioning, high accuracy, and low noise; Long lasting and durable.
