Portable Rail Vertical Tamper a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout. SPECIFICATION Model ND-22 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 1077mm 448mm 362mm Engine G5LS Two-stroke petrol Power 2.2 KW Impact frequency 128Hz 138Hz Exciting force 5500N Weight 19 Kg
ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation. Specification Model ND-1 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 840*470*350 mm Engine Two- stroke petrol engine,1.6kW Rated RPM 4400 r.p.m Impact energy 30~40 J Impact frequency 22 Hz Fuel tank volume 0.95 L Weight 25 kg
NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x 25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail 0.30mm Deviation of bidirectional cutting interfaces 0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Inward tilting of rails by 1 in 20. The wheel-set was first assembled by mounting the wheels symmetrically on to the axle at a clear spacing of 1600 mm, in accordance with the specifications. The wheel-set was further mounted on to the rails, aligning the wheels to travel in the forward direction of the rails, as shown in figure 2. The movement of wheels were allowed only in the longitudinal direction of rails, and the movements in the lateral and vertical directions were constricted. The implementation of high speed railways in India are in their early phases and vast studies are being conducted for the effective implementation of the system. Maintaining the traction required for efficient operation of trains at high speeds requires the net minimum frictional coefficient to be maintained at the wheel-rail interface.
The device holds in position the rails during the welding operation and is adaptable to all rail types: vignole, crane rails and grooved rails. Specification Type Shoulders Material Alloy Steel Dimensions (L x W x H) (mm) 600*540*170mm Place of Origin LN, China Span 460mm Max. lifting force 15KN
The Rail Clamp is an innovative temporary rail joint clamp used prior to welding and to safeguard rail defects prior to repair. The Rail Clamp has been engineered to eliminate many of the disadvantages of other traditional rail clamp designs and provides enhanced performance under all conditions of use. The Rail Clamp design is radically different to the legacy design and guarantees a positive pre-torque angle so as the bolt is tightened the bolt holes remain aligned, eliminating the risk of bent bolts. We test have proved that bolts remain straight even at twice the recommended torque. · Allows suction jars to be attached to stand rail · One rail clamp holds one canister · Rail can hold up to four rail clamps and canisters
Brake Shoes braking is to place iron brake shoes on one or two rails, and the train rolling wheel slides along the rail after pressing the brake shoes. The rolling friction between the wheel and rail changes into sliding friction to prevent the wheel from moving forward and play the role of braking.
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation. Specification Model YD-22 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1300 * 750 * 1600mm Engine Diesel Engine SF190 Power 7kW Vibrating force 22kN Vibrating frequency 66.7Hz Hydraulic system working pressure 5~6MPa Max insert force 16kN Max clamping force 6.5kN * 2 Production efficiency â?¥ 270 pieces / (group â?¢ hour) Inserting depth 110mm ± 10mm (underneath the sleeper) Weight 439kg
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nâ?¢m Max. fasten torque 150 Nâ?¢m Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Portable Rolling Track Gauge is mainly used for railway track gauge and super-elevation (cant) . It can be used for track inspection and fine adjustment of rail gauge. This product has the advantages of fast measuring speed, stable pushing rod, easy to carry,and night-time and tunnel work,legible even in direct sunlight are supported.It is an ideal measuring tool for track fine-tuning, track construction,inspection and track laying.
Polyester, Nylon, PP, metalin yarn, high tensity yarn....
normal tipping film or eco film (phthalate free) transparent or color for shoelace/ garment strip or handbag
needle loom 8/30, 6/45, 8/45, 12/30..... Various brands of Spare parts available
Product Detail: The fully automatic plating line is improved on the basis of the traditional plating line. It realizes the centralized PLC or microcomputer program control in the whole line, which has high working efficiency, fewer operators and less floor space, stable quality, long service life and convenient maintenance. Product Characteristics: 1.Scientific design, reasonable structure: this machine combines designersâ?? more than ten years of design and use experience, so that the production line fully reflects the companys product concept of Economic, efficient, practical in the design and structure. 2.Machine Material SelectionChrome Machine: Storage tank, working tank are made of TA2 material with a long life and no leakage. Anode uses two forms of hanging and rotating column. And it is automatic positioning. Anode can adopt platinum titanium anode and lead-antimony alloys. The liquid feeding system adopts the titanium liquid feeding pump, which has long service life and no leakage.Copper Machine: ANODE can adopt two forms of hanging column and rotating column; its automatic positioning; the new type titanium filter improves the products filtering and sealing effects; titanium (TA2) heating pipe and temperature control system; Japanese Yiweiqi additive pump has high precision and long service life; the storage tank is supported by stiffening rib and sealed by fixing edge. 3.The electronic component adopts Japanese Omron inverter, which guarantees the current stability and the electric appliance service life. The operation adopts the programmable controller, which makes the machine achieve automation on feeding the liquid, anode automatic positioning and other operations.
Drip Tape 20X4X30 (0.4mm) - 1000 meter/roll Minimum Quantity:- 500 Rolls
Drip Tape 20X4X30 (0.2Mm) - 1000 meter/roll Minimum Quantity:- 500 Rolls
Drip Tape 16X4X30 (0.2Mm) - 1000 meter/roll Minimum Quantity:- 500 Rolls
Drip Tape 16x4x30 (0.2mm) - 1000 meter/roll. Minimum Quantity:- 500 rolls
Starting range from .10 usd to 10 usd More than 100 skus in lighter all types of peizo lighter to gas flame lighter