Specifications Model 55125 End Handle 1200 Watts Double Insulated 5" Angle Grinder Anti Vibration Side Handle Ergonomically Designed Weld Dressing In Fabrication Industry Capacity 125 22 6 Mm Watts Input (full Load) 1200 Watts No Load Speed 10000 R.p.m. Approx Net Weight 3 Kg.
The cultivated plant is about 1 metre (3 feet) tall and has stalks with finely divided leaves composed of many linear or awl-shaped segments. The grayish compound umbels bear small yellow flowers. The small dry fruits are greenish brown to yellowish brown oblong ovals about 6 mm (0.25 inch) long with five
Type: wpc hollow decking with round holes Dimension: 140*23*2900 (mm) Color: Yellow, Brown, Red, Coffee, Grey Use: 1. Swimming pool decking. 2. Balcony decking 3. Terace decking 4. Garden decking 5. Harbor and dock decking 6. Park decking 7. Decking for cafes, hotels, restaurants, etc.
Made from 100% food-grade Aluminium with 3 mm thickness.Can cook a variety of food items like vegetables,different types of meats,Pickles,Sweets like payasam,halwa and more Since the uruli is made with appreciable thickness,the food will not get stuck to the bottom and not get burnt inside the cookware which is perfect for deep fry. Consumes less oil and Saves more fuel.
The parameters of the fully automatic cup sealing machine are as follows Type: Packaging and sealing machine Attribute: Fully automatic sealing machine Power 360w) Weight 45 (kg) External dimensions 360x250x580cm (mm) Packaging type: plastic film Production capacity: 10 (times/minute) Voltage: 220V 110V Sealing speed of 3 seconds Film thickness: 0.2mm Power consumption: 0.8kw Temperature control range: 0 to 200 degrees
The tuning fork crystal oscillator 32.768 khz 12.5pF features: 1 Description: Tuning Fork Quartz Crystal 2ã??Nominal Frequency: 32.768KHz 3ã??Oscillation Mode: Fundamental 4ã??Cutting Mode: x +2�° cut 5ã??Measurement Instrument: S&A 250B(Calculated FL) Tuning fork crystal oscillator Electrical Characteristics: Operation Conditions:3*8 mm 32.768khz watch crystal , cylinder type
Compression Fitting Thin Wall Pipe Bridge stainless steel pipe compression fittings, usually referred to as pipe connection fittings made of stainless steel, are used in piping systems to achieve pipe transitions, branching, or change of flow direction. Specification of compression fittings for stainless steel tubing NO. Size External Dia.(mmÃ??in.) Thickness(mm) 1 1/2'' 18 1.5 2 3/4'' 22 1.5 3 1'' 28 1.5 We provide compression fittings for steel pipe, compression fittings on stainless steel pipe, compression fittings stainless steel, etc. For more information, please feel free to contact us!
Compression Fitting Thin Wall Pipe Bridge stainless steel pipe compression fittings, usually referred to as pipe connection fittings made of stainless steel, are used in piping systems to achieve pipe transitions, branching, or change of flow direction. Specification of compression fittings for stainless steel tubing NO. Size External Dia.(mmÃ??in.) Thickness(mm) 1 1/2'' 18 1.5 2 3/4'' 22 1.5 3 1'' 28 1.5 We provide compression fittings for steel pipe, compression fittings on stainless steel pipe, compression fittings stainless steel, etc. For more information, please feel free to contact us!
Ecological fertilizer NPK 4:3:3 + 1 MgO and 7 CaO. Weed-free fertilizer obtained from mature chicken manure. Suitable for all purposes, from vineyards, gardens to farming. It is in the form of pellets with a size of 4-5 mm. LARGER quantities available in the form of 25 kg bags and BIG BAG bags of 650 kg. (the possibility of larger or smaller big bags) It has an eco certificate! In order not to think that this is another boring ad from overbuyers, we use fertilizer ourselves on our two companies on all our organic arable land!
WPC Pergola 1. Material: - 100% wood powder -100% virgin HDPE plastic powder - Adhesives HCDWOOD WPC Pergola are a popular decorative material in recent years. The product has beautiful design, natural wood grain, which creates a feeling of familiarity with nature while increasing the elegance of architectural works. 2. Specifications: 1. Code: LT40x60ID 2. Specifications: 40x60x2900 mm 3. Color: Red brown, Yellow, Coffee, Dark grey, Wood brown. 4. Surface: Smooth, Rough. 3. Application: WPC Pergola is used to decorate walls, ceilings, stair partitions, create highlights for interior and exterior spaces of houses, offices, restaurants, hotels, etc
Screw oil press is the most commonly used equipment for oil extraction,different oil extractors have different functional characteristics,the following will be detailed about the characteristics of screw press. 1.High oil yield: THE use of directional pressure, multistage propulsion, one squeeze, residual oil rate within 6.5%. 2.Large pruduction capacity: strengthen feeding system, increase speed, work efficiency increased by more than 30%. 3.Automatic control: automatic control of pressing temperature; Built-in vacuum shunt, oil, slag effective separation; 4.Safe and convenient: compact structure, less space occupation; Fully enclosed protection, safe and convenient operation; 5.Durable: The body is made of high quality wear-resistant steel and anti-fatigue casting, stable performance, can work continuously for a long time; Machine table is made of new material electrostatic spraying, strong adhesion, greasy, high temperature resistance, beautiful and generous, and clean health.
clumps in seconds, strong clumps, strong water absorption, 100% deodorizing effect, no dust, and low dosage. 1. Clumping Cat Litter: made by Pea dregs, the cat litter pellets are unbeatable Odor Control, They Can quickly absorb moisture and form a mass for easy handling cat litter; 2. Natural Cat Litter biodegradable cat litter: Easily soluble in water and degradable in water, eliminating the trouble of handling cat litter, can be flushed into the toilet or used as a garden fertilizer; 3. Vacuum Package: 6LB of tofu cat litter can satisfy a kitten for half a month or even longer; 4. Dust-Free Cat Litter: low-tracking cat litter no dust, non-tracking granules for less mess so you and your cat can breathe easily. Give the less chance to be allergic than other cat litter. And because it doesn't stick to your cat's paws, it won't be tracked throughout your house. 5. High-Quality Service: If you have any questions, please feel free to contact us. We will try our best to solve them for you. Thank you for being so supportive of Lepaixing.
ZM-R5860 Hot Air BGA Rework Station ZM R5860C Hot Air BGA Rework Station is a kind of rework station provided by Zhuomao, which has three temperature zone Independently control, convection hot air heating, lower temperature zone height-adjustable, high-precision autonomous control system, high-precision K-type thermocouple with accuracy up to ± 3, dynamic APR multi-loop closed-loop control selective reflow process. Imported high power constant current integrated cooling fan. As one of the most reputable BGA Rework Station suppliers, Seamark ZM provides the best BGA Rework Station with good quality. If you want to know seamark ZM R5860 price, please contact us now! Functions of Zhuomao ZMR5860 Smart BGA Rework Equipment 01 Temperature Curve Setting High-definition touch screen operation, real-time display and, editing of temperature curves, each group of temperature curves can be set to 8 segments, 100 groups of temperature curves can be stored, with temperature self-organizing function. 02 Laser Red-dot Positioning Guide Laser indicator for PCB and component positioning. 03 Vacuum Adsorption The external vacuum suction pen is convenient for taking BGA. Specification Of Seamark Zhuomao BGA Rework Station Power Supply AC220V±10% 50/60HZ Power 5.0KW(Max), Top heater(0.8KW) Bottom heater (1.2KW), IR Preheater (2.7KW),Other(0.3KW) PCB Size 410*370mm(Max); 10*10mm(Min) BGA Chip Size 40*40mm(Max); 10*10mm(Min) IR Heater Size 375*285mm Temperature Sensor 1 pcs Operation Method 7" HD touch screen Control System Autonomous heating control system V1 software copyright Alignment System Laser dot Vacuum Adsorption Manual Temperature Control K-type thermocouple closed-loop control with accuracy up to ±3 Positioning V-groove with universal fixture Dimensions L635*W620*H655mm Weight 43.5KG Principle And Operation Mode Of Seamark ZM R5860 BGA Machine The Seamark ZM R5860 BGA Machine is a rework station used for soldering and desoldering ball grid array (BGA) components on printed circuit boards(PCBs).BGA components are a type of surface-mount packaging used for integrated circuits. Seamark Zhuomao ZM R5860 BGA Machine is based on the hot air rework technique. lt uses precisely controlled hot air to melt the solderballs of the BGA component allowing it to be removed or replaced without damaging the PCB or the component itself. The machine also uses a vision alignment system to accurately align the BGA component with the PCB. The Seamark ZM R5860 BGA Machine allows for precise control over the temperature and airflow, ensuring a reliable and high-quality soldering/desoldering process. lt is suitable for use with a wide range of BGA components and PCBs. The operation mode of the Seamark ZMR5860 BGA Machine involves several steps: Preheating: The PCB is preheated to a suitable temperature to prevent thermal shock to the board when the hot air is applied.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Mobile Screening & Sand Washing Plant is a single-chassis solution for stone, sand other mineral quarries where the product needs to be sorted out and washed to get clean and ready-for-usage construction aggregate. Being one of the developed solutions for the stone crushing field, all parts of the line are constructed on a single chassis, where attachments like additional bunker walls, walking platforms, and conveyor belt are of foldable design. DISTINCTIVE FEATURES OF THE MACHINE: 1. Compact design: loading hopper, vibrating screen, screw sand washer, conveyor belts, diesel generator & walking platforms are installed on a single mobile chassis. 2. Easy transportation: machine can be transported with a single truck head. 3. Fast assembly and dismantling work: assembly work of the machine takes only 2 days. 4. Screening & Washing of the product: a combination of screening & sand washing processes can be performed with a single machine in place. 5. Stocking: foldable design conveyor belts are supplied with hydraulic pistons, which allow for the assembly of conveyor belts from a control panel to easily. Mobile Screening & Washing plant models are: SMSW 1240 600x6300 mm Single Helix / 1200x4000 mm screen / 60-100 T/H SMSW 1650 600x6300 mm Double Helix / 1600x5000 mm screen / 150-200 T/H SMSW 2250 800x8000 mm Double Helix / 2200x5000 mm screen / 250-320 T/H
Welded Wire Concrete Reinforcement Welded wire concrete reinforcement is made of steel bars arranged in two mutually perpendicular directions and connected by resistance spot welding. Reinforcing mesh is used to add structural strength to reinforced concrete structures and asphalt. Creating internal frame reinforcement for concrete structures can provide a high level of performance. Applications Construction. Welded reinforcing mesh is widely used for the reinforcement of concrete structures. In this case, welded reinforcing mesh is laid inside the poured concrete formwork (under the slab, poured frame foundation slab) and is used to increase the strength of the formed concrete structure. Fabrication of frames. Reinforcement of road surfaces or parking lots, so welded reinforcing mesh is called road reinforcing mesh (5-6 mm). Manufacture of various fences. Used as masonry mesh (3-4 mm wire). Used as coal mine support mesh for coal mine tunnel support.
Features: Easy to install Good expansibility Electro-galvanizing is not easy to rust. Large contact area and high pullout strength Technical data: Thread *Thread *Drill hole(mm) *Length(mm) *Pull out load( KGS) M6 * 8 * 6 * 25 * 980 M8 * 8 * 10 * 30 * 1350 M10 *10 *12 *40 * 1950 M12 *12 * 16 * 50 * 2900 M14 *14 * 18 * 55 * -- M16 * 16 * 20 * 65 * 4850 M20 * 20 * 25 * 80 * 5900 Application: Fixing suspended ceilings, sprinklers and ventilation systems, structural fixing, inner and outer ironworks, fixing threaded bars. Installation 1. Use straight hole drills to drill holes of corresponding diameter and depth, 2. use the soot blower to sweep ash until the hole has no dust overflow, 3. Put the anchor in the hole, 4. Use a hammer to hit the inner core with a rod to expand the expansion sheet
---------Description--------- ! We provide installation work and operational training for all of our equipment! Vertical Shaft Impact Crushing-Screening Line is a tertiary stage plant, which is used to finalize crushing process to receive much amount of sand size product, which is mostly used in concrete and asphalt batching plants. This line consists of primary loading hopper, which receives and sends the product to the crusher, where crushed product is sent to the vibrating screen, sorted into fractions, and the oversize product sent back to the hopper via feedback conveyor. Feeding bunker 10 m3 Vertical Shaft Impact Crusher 800 mm Vibrating screen 2000x6000 mm (3 deck) Feel Free To Contact Us For Any Additional Information!
Introduction The ARTB series filter cartridge uses high-purity titanium powder as the raw material, processed through high-temperature vacuum sintering. It features high porosity, uniform pore size distribution, and unique capabilities to withstand temperatures up to 300 degrees Celsius (in wet conditions) as well as strong acids and alkalis. This product is easy to backwash, enabling effective regeneration, and is suitable for separating and purifying various gases or liquid media. Specification Filter material: High-purity titanium Pore size: 0.22 ~ 100 micron Length: 5" ~ 40" Diameter: 60 ~ 100 mm Physical regeneration methods: a. Pure water backwashing b. Steam blowback c. Ultrasonic cleaning Chemical treatment methods: a. Alkaline washing b. Acid washing Interface type: 222, 226, 215, DOE, M20, M30, M36, M42 Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical industry: Decarbonization and impurity removal filtration in the production of raw pharmaceutical materials. Chemical industry: Filtration of strong acidic and alkaline chemical solvents. Water treatment industry: Pre-filtration for reverse osmosis systems, seawater desalination, wastewater treatment systems, etc. Gas industry: Purification of compressed air and catalytic gases, filtration in ozone sterilization systems. Food industry: Clarification filtration for food and beverages, edible oils, soy sauce, vinegar, and other products.
