Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) 40*15cm Weight 2kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name rail stopper Usage rail stopper Application rail stopper Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes rail shoe buffer Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches. The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Specification Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) (40*15cm Weight 2kg
Single-side rail chamfering device is a special tool for eliminating the stress concentration at the sharp corner after rail drilling operation. It has the advantages of compact structure, simple operation, small size, light weight and convenient carrying etc. It is an indispensable tool in rail drilling works. Specification Model LJ-DJQ-D Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 180* 50*190mm Max chamfer diameter �¦ 31~�¦32 Max chamfer cutting torque Tmax = 10N â?¢ m Max moving forceh of handle rod Fmax = 55N (L = 180) Working efficiency 1 piece /10 seconds Overall size 180* 50*190mm Machine weight 1KG
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control. Specification Model LJ-QD15 Type Rail Track Jack Material Stainless Steel Dimensions (L x W x H) 310*165*520mm Rated top lifting force 147HN (15T) Rated hook lifting force 78kN Lifting stroke â?¥270mm Initial height 60mm Weight â?¤25kg
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track Specification Model YBD-245A Type Hydraulic Railway Track Material Stainless Steel Rated lifing force/ Rated lining force(kN) 245/145 Maximm lifting Quantity/ lining quantity(mm) 135/95 Weight(kg) 23
NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 1300*510*760mm Main shaft rpm 780r/min Max. loosen torque â?¥300 Nâ?¢m Max. fasten torque â?¥150 Nâ?¢m Working efficiency â?¤10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
NLB-1800 Rail Bolt Wrench The NLB-1800 Rail bolt wrench is novel in design, compact in structure, small in volume, light in weight, strong in maneuverability, two-stage shock absorption of handle, portable in hand, convenient in getting on and off the track, especially suitable for the regional maintenance operation of track bed where turnout, tunnel, bridge and culvert and other large and medium-sized railway maintenance machinery cannot work. Specification Model NLB-1800 Type Rail Bolt Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380mm Petrol engine Two stroke petrol engine Rated Revolution 12000r / min Rated power 3.6kw Spindle speed 1130R / min Torque â?¥ 1800n. M
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification item NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
Place of Origin Hubei, China Type Electric Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1200*420*900mm Brand Name Linkage Engine 2.2kW, 380V or 220V electric motor Grinding stone speed 2860 r/min Grinding stone specification 150*55*70mm Grinding stone feeding stroke 50mm Turning angle of grinding stone 90�° Weight 80kg Electric Rail Grinding Machine The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90�°about the rail head by rotation of the machine using its turming device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Digital Rail Offset Ruler This digital railway offset ruler is special equipment which is used for railway turnout offset distance and frame size Measuring the distance between the working edge of straight stock rail and the closure rail working edge BENEFITS 1 Durable Adopt the high strength material not easy to wear out 2 High Accuracy Reach 005mm 3 Stable insulation performance The ruler body is equipped with insulating board which is made of epoxy glass fiber board FR4 It has high mechanical strength performance under the temperature of 40 120 The size of the mechanical ruler is stable and never degenerates and the electrical insulation performance is stable in high humidity environment 4 Accept customized 5 Digital displayeasy to read 6 Multifunctions with wide usagecould be used for measuring two kinds projectssuitable for different demands 1Measure the offset distance for the standard track gauge turnout 2Could be used as track square ruler for measuring the right alignment of rail tracks 7 High hardness Measure Heads Made of Rockwell 52 steel high hardness and not easy to rust Specification Model LJSZJCI Type Digital Rail Offset Scale Ruler Material Aluminum alloy Dimensions L x W x H 17103540cm Type Digital Measuring Rang 1001400mm or Customization Indication Error 04mm Accuracy 005mm Insulation Resistance 1M
Contact rail gauge for METRO measurement The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be customized according to customer requirments,detachable and easy to carry. the main ruler body use high strengthsquare tube aluminum alloy. advantages:precise measurement,new style,reasonable design. Model: LJ-JCG-I Vertical Measure range: customize Horizontal Measure range: customize Accuracy: 0.5mm
Railway Track Square Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track. Benefits 1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm 2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance 3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely. 4.Customizable 5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions 1ï¼?Measure the switch angle steel whether is square when installed 2ï¼?Measure the internal lock switch parts whether is square when installed 3ï¼?Measure the switch rail whether creeping 4ï¼? Measure the sleeper whether square when installed. Specification Model: LJFG-I Type: Railway Track Square Material: Aluminum alloy Size: 1760mm
Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Model: ZSH-50 Type: Versine Measuring Device Material: Plastic Dimensions (L x W x H): 133*66*26mm Measuring Range: 50m Weight: 210kg
Laser Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device .
Versine Measuring Device For easy checking and determination of versines in track track curves . It can be used for all common rail profiles, Magnet type . Benefits Curve versine measuring box, is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the worker to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model: ZSH-20 Type: Versine Measuring Device Material: Aluminum Dimensions (L x W x H): 100*20*50mm Measure range: 20M Weight: 157G
Rail Feeler Gauges is used for inspecting clearance BENEFITS Strong toughness, disassembly design, accurate measurement, not easy to rust Specification Model Number: LJ-SC1 Type: Feeler Gauges Material: Stainless Steel Dimensions (L x W x H): 30*15*5 cm Weight: 135g Blade thickness: 0.02mm, 0.03mm, 0.05mm, ,0.25mm, 0.30mm, 0.35mm ,0.40mm,0.45mm, 0.50mm, 0.55mm ,0.6mm ,0.7mm , 0.75mm, 0.8mm,0.85mm ,0.9mm, 0.95 mm,1.00mm.
aser Alignment Device Laser Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device,target positioning device and moving positioning target device . Specification Model: LJ-BXJG Type: Rail Laser Alignment Device Material: Alluminium Alloy Dimensions (L x W x H): 30*30*12mm Laser measure distance: 30m Laser center spot:﹤10mm (30m distance area) Vertical Point range: (-30~+60)mm Horizontal Point range: (-30~+60)mm Accuracy: 2mm Gross weight: 1.5KG Battery: 2000mAh (continuous using 5-6 hours)
