Fine blanking steel strip Cold rolled steel strip suitable for high volume component manufacture and presswork Pallets, crates or boxes 1 metre square
Case hardening steel strip Cold rolled mild steel strip suitable for subsequent casehardening. Supplied to all internationally recognised standards: british standard, euronorm, nfa, din, aisi, jis etc... Pallets, crates or boxes
Mild steel strip Previously manufactured to British standard we can supply this product to all internationally recognized specifications: euro norm, nfa, din, aisi, jis etc.. Pallets, crates or boxes normally 1 metre square
1. Regarding of stainless strip in coil, we are very specializing in csp, b/a (cold strip for spring - hard tempered) -1.4310(aisi301), 1.4301(aisi304), 1.4307(aisi304l) and ep11(1% nickel). ** thickness : 0.07mm ~1.50mm ** width : 7mm ~ 400mm 2. Now, we would like to introduce our new substitute item of aisi 301. Our new item is a sk-5 (t/s 2000 ~ 2400n/mm2 - for power spring) for seat belt, clock and vacuum cleaner spring. We already developed and tested the item with posco We are sure that you will be satisfied with our quality. ** thickness for power spring : 0.10mm ~0.40mm ** width : 7mm ~ 290mm ** t/s : min 2, 000n/mm2 ** thickness for gerneral application : 0.50mm ~ 1.70mm ** width : 30mm ~ 400mm ** soft tempered : hv190 max, hard tempered : hv260 max
Hot Rolled Steel Strip Specifications: 1) Thickness:1.5-5mm 2) Width: less than 720mm 3) Steel Grade: Q195, Q215, Q235, SPHC, SPHD, 08AL, SS300, SS400, SAE1006, SAE1008, S235JR 4) Internal Diameter: 508mm, or 610mm 5) Coil Weight: usually 2~8 tons per roll, we can produce as per customer's requests 6) Thickness tolerance: +/- 0.18mm 7) Width tolerance: +/- 0.5mm 8) Packaging: Standard export packing Standard Export Seaworthy Packing
Hot rolled steel strips:material:q195.Q195l.Q215.Q235 width:145mm-355mm, thickness:2.5mm-4.0mm, output:1200000mt per year, standard:gb/t 3524-2005. Cold roll steel strip :material:q195.Q195l Width:27mm-520mm Thickness:0.3mm-2.0mm Output:300000mt per year Tolerance:width +/-0.2mm thickness +/- 0.015mm
Item Specification Materials: Cold rolled steel strips slit edge, non-skinpassed Size: 0.6-1.5 mmf-323 mm max Grade: Q195 black surface finish or bright surface finish Coil weight: 400kgs min each coil. 2 - 4mt per pallet Coil id: 500-580 mm Thickness tolerance: +/-0.02 mm Mill's standard export packing by pallets
Plastic clad steel strip
Spring steel strips We make this strips in c55, c65, c75, c80 grades Surface finish we can offer is grey, bright, blue, golden Edges we can offer is slitted , deburred, rounded Depends on size
Hot rolled steel strip 1.Specification Commodity Steel strip StandardAISI, ASTM, BS, DIN, GB, JIS width 30-700mm Thickness 0.15-4mm Technique Hot and Cold Rolled Price Terms FOB,CFR,CIF Payment terms 30%TT in advance+70% TT or irrevocable 70%L/C at sight delivery time within 15days delivery place Tianjin xingang port Surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
1.Specification Commodity steel strip Standardaisi, astm, bs, din, gb, jis width 30-700mm thickness 0.15-4mm technique hot and cold rolled price terms fob, cfr, cif payment terms 30%tt in advance+70% tt or irrevocable 70%l/c at sight delivery time within 15days delivery place tianjin xingang port surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
Sell Cold Rolled Steel Strip Specification Commodity Steel strip StandardAISI, ASTM, BS, DIN, GB, JIS width 30-700mm Thickness 0.15-4mm Technique Hot and Cold Rolled Price Terms FOB,CFR,CIF Payment terms 30%TT in advance+70% TT or irrevocable 70%L/C at sight delivery time within 15days delivery place Tianjin xingang port Surface treatment chromed / skinpass/ oiled/slightly oiled/ dry/ anti-fingerprin
Sell Galvanized Steel Strip Product Application 1) Buildings and constructions: roofing, ceilings, gutters, venting lines, indoor decorations, window frames, etc. 2) Electrical appliances: computer shells, washing machines, refrigerators, dehumidifiers, video recorders, water heaters, etc. 3) Agricultural equipments: troughs, feeding tools, agricultural driers, irrigation channels, etc 4) Vehicle parts: back-seat plates of buses and trucks, conveying systems, oil tanks, etc. Name Color coated steel coil/ Prime prepainted galvanized steel coil/ PPGI coil z275 Description Prepainted Galvanized Steel Coil Model Number TongYing Steel Type Cold rolled steel sheet, hot dipped zinc coated steel sheet, hot dipped A-Z coated steel sheet Paint Color Based on RAL No. or customers' color sample Paint Polyester , and your special requirement to be discussed Paint Thickness 1 Top side: 25+/-5 micron 2 Back side: 5-7micron Or based on customers' requirement Steel Grade Base material SGCC or your requirement Thickness Range 0.16mm-1.2mm Width 1000mm,1200mm,1250mm,1500mm Zinc Coating Z40-Z275 Coil ID 508mm or 610mm Coil Weight 3-5MT, or as per customers' requests Technique Cold Rolled Surface Protection PE,PVDF,SMP,HDP,etc Surface Treatment Galvanized,Chromated,Unoiled/Oiled,Bright Finished,Spangle,Fingerprint Resistance.
1) Grade: Ordinary carbon steel: Q195, Q235 SPCC, SPCD, SPCE, DC01-06, St12, etc. Improved carbon structural steel: 2) Thickness: 0.10mm - 3.0mm 3) Width: 10mm and above 4) Coil ID: 250mm/400mm/508mm or per customer's request Strapped with min three strapping strips, covered by anti-water paper and plastic film, fixed on the iron or wooden pallets by strapping strips and covered by plastic bag to prevent damage from transportation.
Material: M42, D6A, X32, M51 Technical process: cold rolling, laser welding,teeth punching(per request). Thickness:0.635/0.889/0.9/1.07/1.21/1.35/1.47 Width:12/27/29/34/38/42/45/51/63/80 Hardness: per request MOQ:500kgs Delivery time: 35-45days Package: Standard sea worthy packages Factory: yes
Matereials: SAE1045,SAE1050,SAE1055,CK75 Technical process: Annealing, hot rolled, cold rolled, heat treatment Hardness: Per customer request Thickness: 0.5-4.0mm Widthness: 4-400mm(For over 400mm, need check per case) Tolerance:+/-5% Package:Sea standard worthy package. Delivery time: 25-35days MOQ:2000KGS
Color: Black/Bright/Blue/Yellow Metrial: 50#,65Mn Specification: Thickness:0.3-2.5mm Width:30-270mm HRC:43-49
W steel belt is a new type of mining support material, W/M steel belt use the rolled steel sheet that the thickness is 3-5mm, width is 180-320mm, after the cold bending to W type, in W steel belt, the steel strip with the bolt is equal to the bolt hole. W steel belt can combine to the anchor plate bracket with all kinds of bolt, W steel belt combine many bolts to a monocoque structure, W steel belt is widely used in coal mine underground roadway, working face cutting, chamber and other areas of roadway support, it is better to deal with unstable surrounding rock.
T-shape steel belt is a kind of roof steel belt, the T steel belt is named for the same section as the letter T, it is mainly applied to mechanical and industrial mining industry, which is made of cold pressing of high strength alloy plate. The T-shape steel has the characteristics of high bearing strength, reliable anchorage, good elongation and suitable for quick installation, the bolt support can be combined with various anchors, significantly improve the overall effect of the bolt, in the incomplete roof strata, it is best to deal with unstable surrounding rock.
Product Overview Wiper blade steel strip GuangWeiYouLiang is professional in manufacturing steel strip for wiper blade. this special kinds of material grade, For match customer's expections of providing the best quality including straightness, smooth surface,capable for anti-rust, and good service on after sales, we adopt advanced facilites to assist production, so accurate degree, mechanical properties can be controlled. Annual output over 20,000 tonnes, we have abosolutely advantage on price, meantime quality is guarranteed. Details below for reference: 1. steel coils for wiper blade materials 2. 0.8mmX14mm 0.9mm X14mm 0.8x15mm Meter/KG Width 14mm 15mm Thickness inch 0.55" 0.590" 0.8mm 0.031" 11.3 10.6 0.9mm 0.035" 10.1 - 7 0.7 7 0.8 7 0.9 7 1.0 12 0.5 12 0.6 12 0.7 12 0.8 12 0.9 12 1.0 12 1.2 14 0.7 14 0.8 14 0.9 14 1.0 16 0.7 16 0.8 16 0.9 Unit: mm Application: 3. materials grade: prime steel 4. edge: slitted/ burr-free 5. surface: smooth without rust.
