Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Customized co-extrusion medical grade cable, wire and tube/catheter.
corrugated silicone tube is widely used in medical industry, it is able to withstand high temperature like autoclave sterilization. silicone is a good material to pass the medical test like bio-compatibility test.
High quality silicone foam tube for medical, consumer and industrial application. It has outstanding heat-resistant air aging performance, strong sealing, ozone resistance, and is moisture-proof.
Whole Blood Collection Tube Golden Vac whole blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test, does not require separation of plasma or cells. It includes 2 kinds of tubes: EDTA Tube with Purple cap, ESR Tube with black cap. EDTA Tube is widely used for clinical haematology test, especially for routine blood examination. Our automatic sampling instrument finely and accurately spray additives onto the interior tube wall, to ensure the mixing speed and the anticoagulation effect. EDTA Tube is very convenient to use for it can be directly put on the analyzer to detect without openning the cap. Item GD020EK3 , Specification Purple cap, EDTA K3, 13*75mm, 2ml, Item GD030EK3 , Specification Purple cap, EDTA K3, 13*75mm, 3ml, Item GD040EK3 , Specification Purple cap, EDTA K3, 13*75mm, 4ml, Item GD050EK3 , Specification Purple cap, EDTA K3, 13*75mm, 5ml, Item GD060EK3 , Specification Purple cap, EDTA K3, 13*100mm, 6ml, Item GD070EK3 , Specification Purple cap, EDTA K3, 13*100mm, 7ml, Item GD080EK3 , Specification Purple cap, EDTA K3, 16*100mm, 8ml, Item GD090EK3 , Specification Purple cap, EDTA K3, 16*100mm, 9ml, Item GD0100EK3 , Specification Purple cap, EDTA K3, 16*100mm, 10ml, Item GD080EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 8ml, Item GD090EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 9ml, Item GD0100EK3R , Specification Rubber stopper, EDTA K3, 16*100mm, 10ml, Item GD020EK2 , Specification Purple cap, EDTA K2, 13*75mm, 2ml, Item GD030EK2 , Specification Purple cap, EDTA K2, 13*75mm, 3ml, Item GD040EK2 , Specification Purple cap, EDTA K2, 13*75mm, 4ml, Item GD050EK2 , Specification Purple cap, EDTA K2, 13*75mm, 5ml, Item GD060EK2 , Specification Purple cap, EDTA K2, 13*100mm, 6ml, Item GD070EK2 , Specification Purple cap, EDTA K2, 13*100mm, 7ml, Item GD080EK2 , Specification Purple cap, EDTA K2, 16*100mm, 8ml, Item GD090EK2 , Specification Purple cap, EDTA K2, 16*100mm, 9ml, Item GD0100EK2 , Specification Purple cap, EDTA K2, 16*100mm, 10ml, Item GD080EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 8ml, Item GD090EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 9ml, Item GD0100EK2R , Specification Rubber stopper, EDTA K2, 16*100mm, 10ml, Item GD035EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 13*75mm, 3.5ml, Item GD060EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 13*100mm, 6ml, Item GD085EK3RG , Specification Rubber stopper, EDTA K3 + Separate Gel , 16*100mm, 8.5ml, Item GD085EK3G , Specification Purple cap, EDTA K3 + Separate Gel , 16*100mm, 8.5ml,
Golden Vac plasma blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test. After centrifugation, plasma can be separated from blood cells effectively. Plasma tube includes 5 kinds of tubes: Clotting Tube with blue cap, Heparin Tube and Gel & Heparin Tube with green cap, Compound of Sodium Fluoride and Anticoagulant Tube with grey cap, Gel& EDTA Tube with lavender cap. Coagulation Tube Coagulation Tube aims to obtain plasma specimen for coagulation function test, it contains buffered Sodium Citrate solution with the concentration of 3.2% ï¼?0.109 mol/Lï¼?. The mixing ratio of blood to Sodium Citrate is 9:1. This anticoagulant is sustained and stable, it strictly control the microbial limit, making sure the APTT test under the excellent condition. Item GD018SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 1.8ml Item GD027SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 2.7ml Item GD036SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 3.6ml Item GD045SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 4.5ml Item GD018SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 1.8ml Item GD027SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 2.7ml Coagulation Tube ( Glass Only) Item GD018SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 1.8ml Item GD027SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 2.7ml
Golden Vac plasma blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test. After centrifugation, plasma can be separated from blood cells effectively. Plasma tube includes 5 kinds of tubes: Clotting Tube with blue cap, Heparin Tube and Gel & Heparin Tube with green cap, Compound of Sodium Fluoride and Anticoagulant Tube with grey cap, Gel& EDTA Tube with lavender cap. Coagulation Tube Coagulation Tube aims to obtain plasma specimen for coagulation function test, it contains buffered Sodium Citrate solution with the concentration of 3.2% �¯�¼?0.109 mol/L�¯�¼?. The mixing ratio of blood to Sodium Citrate is 9:1. This anticoagulant is sustained and stable, it strictly control the microbial limit, making sure the APTT test under the excellent condition. Item GD018SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 1.8ml Item GD027SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 2.7ml Item GD036SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 3.6ml Item GD045SC , Specification Blue cap, Coagulation, 3.2% Sodium citrate 13*75mm, 4.5ml Item GD018SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 1.8ml Item GD027SCD , Specification Blue cap, Coagulation, 3.2% Double wall 13*75mm, 2.7ml Coagulation Tube ( Glass Only) Item GD018SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 1.8ml Item GD027SC-F , Specification Blue cap, Glass tube, Coagulation, 10.25*64mm ( flat bottom) , 2.7ml
Golden Vac plasma blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test. After centrifugation,Ã?? plasma can be separated from blood cells effectively. Plasma tube includes 5 kinds of tubes: Clotting Tube with blue cap, Heparin Tube and Gel & Heparin Tube with green cap, Compound of Sodium Fluoride and Anticoagulant Tube with grey cap, Gel& EDTA Tube with lavender cap. HEPARIN TUBE Heparin Tube aims to obtain plasma specimen, which is used not only for emergency biochemistry tests but also for blood rheology test. Inside the tube wall, where is well sprayed with lithium heparin or sodium heparin which is a kind of anticoagulant activating antithrombins to block the coagulation cascade reaction. Item GD030SH, Specification Green cap, Heparin Sodium, 13*75mm, 3ml Item GD040SH, Specification Green cap, Heparin Sodium, 13*75mm, 4ml Item GD050SH, Specification Green cap, Heparin Sodium, 13*75mm, 5ml Item GD060SH, Specification Green cap, Heparin Sodium, 13*100mm, 6ml Item GD070SH, Specification Green cap, Heparin Sodium, 13*100mm, 7ml Item GD0100SH, Specification Green cap, Heparin Sodium, 16*100mm, 10ml Item GD0100SHR, Specification Rubber stopper, Heparin Sodium, 16*100mm, 10ml Item GD030LH, Specification Green cap, Heparin Lithium, 13*75mm, 3ml Item GD040LH, Specification Green cap, Heparin Lithium, 13*75mm, 4ml Item GD050LH, Specification Green cap, Heparin Lithium, 13*75mm, 5ml Item GD060LH, Specification Green cap, Heparin Lithium, 13*100mm, 6ml Item GD070LH, Specification Green cap, Heparin Lithium, 13*100mm, 7ml Item GD0100LH, Specification Green cap, Heparin Lithium, 16*100mm, 10ml Item GD0100LHR, Specification Rubber stopper, Heparin Lithium, 16*100mm, 10ml
Golden Vac plasma blood collection tube promises to provide non-polluting and non-differential original blood specimen for medical test. After centrifugation, plasma can be separated from blood cells effectively. Plasma tube includes 5 kinds of tubes: Clotting Tube with blue cap, Heparin Tube and Gel & Heparin Tube with green cap, Compound of Sodium Fluoride and Anticoagulant Tube with grey cap, Gel& EDTA Tube with lavender cap. GLUCOSE TUBE Compound of Sodium Fluoride and Anticoagulant Tube aims to obtain highly stable plasma for blood glucose testing. Sodium Fluoride is a kind of inhibitor of glucose degradation, it has the function of repressing glucose metabolism and degradation. Optional Anticoagulant are Potassium Oxalate, EDTA and Heparin, they could prevent blood coagulation and avoid blood hemolysis. This particular compound additive realise that blood glucose specimen could be cold storage for a long time. Item GD020SFH, Specification Gray cap, Sodium Fluoride + Heparin Sodium , 13*75mm, 2ml, Item GD030SFH, Specification Gray cap, Sodium Fluoride + Heparin Sodium , 13*75mm, 3ml, Item GD040SFH, Specification Gray cap, Sodium Fluoride + Heparin Sodium , 13*75mm, 4ml, Item GD050SFH, Specification Gray cap, Sodium Fluoride + Heparin Sodium , 13*75mm, 5ml, Item GD020SNA, Specification Gray cap, Sodium Fluoride + EDTA Na2 , 13*75mm, 2ml, Item GD030SNA, Specification Gray cap, Sodium Fluoride + EDTA Na2 , 13*75mm, 3ml, Item GD050SNA, Specification Gray cap, Sodium Fluoride + EDTA Na2 , 13*75mm, 5ml, Item GD020SP, Specification Gray cap, Sodium Fluoride + Potassium Oxalate , 13*75mm, 2ml, Item GD030SP, Specification Gray cap, Sodium Fluoride + Potassium Oxalate , 13*75mm, 3ml, Item GD040SP, Specification Gray cap, Sodium Fluoride + Potassium Oxalate , 13*75mm, 4ml, Item GD050SP, Specification Gray cap, Sodium Fluoride + Potassium Oxalate , 13*75mm, 5ml, Item GD6001, Disposable ESR Pipette with prefilled (3.2% Trisodium Citrate and capped filling tube 100pcs / box *10 boxes
Capillary Blood Collection Tube Item GDC005A , Specification: Capillary Blood Collection Tube, Plain, 0.5ml Item GDC005CA , Specification: Capillary Blood Collection Tube, Clot Activator, 0.5ml Item GDC005EK3 , Specification: Capillary Blood Collection Tube, EDTA K3, 0.5ml Item GDC005EK2 , Specification: Capillary Blood Collection Tube, EDTA K2, 0.5ml Item GDC005LH , Specification: Capillary Blood Collection Tube, Heparin Lithium, 0.5ml Item GDC005SH , Specification: Capillary Blood Collection Tube, Heparin Sodium, 0.5ml Item GDC005SFH , Specification: Capillary Blood Collection Tube, Heparin Sodium + Sodium Fluoride, 0.5ml Item GDC005SGC , Specification: Capillary Blood Collection Tube, Gel + Clot Activator, 0.5ml
Vacuum blood collection tube Type: Clot activators Gel separator / Clot activator K3-EDTA Anticoagulant K2-EDTA Anticoagulant Sodium Citrate 3,8% Anticoagulant Sodium Citrate 3,2% Anticoagulant Sodium Flouride/ Potassium Oxalate Lithium Heparin Anticoagulant ESR - Sodium Citrate 3,8% Granules & Clot Activator Vacuum Tube for Urine Collection. Most blood collection tubes contain an additive that either accelerates clotting of the blood (clot activator) or prevents the blood from clotting (anticoagulant). A tube that contains a clot activator will produce a serum sample when the blood is separated by centrifugation and a tube that contains an anticoagulant will produce a plasma sample after centrifugation. Some tests require the use of serum, some require plasma, and other tests require anticoagulated whole blood.
Vacuum Blood Collection Tube introduced by us promises to live up the expectations of the buyers. It is manufactured completely in clean room environment by using the best of the quality materials and assembled on a 100% Automatic assembly Line. We believe in quality and the same has been inculcated in our products. We produce the tubes in two volumes 13 75 mm and 13 100 mm. Variants : K2 EDTA (2 ml - 6 ml) K3 EDTA (2 ml - 6 ml) Clot Activator (2 ml - 6 ml) Sodium Heparin (2 ml - 6 ml) Lithium Heparin (2 ml - 6 ml) Sodium Fluoride (2 ml - 6 ml) Sodium Citrate (2 ml - 6 ml) Gel with Clot Activator (3.5 ml - 5 ml) We follow the colour codes of ISO 6710:2016 for the manufacturing process of the tube.
Product name:Vacuum blood collection tube Cap color : Red, blue, yellow, green, black, purple, gray Draw volume:1-10ml Specifications:12x75mm,12x100mm,13x75mm,13x100mm,16x100mm Material:plastic,glass
Product name:Vacuum blood collection tube Cap color : Red, blue, yellow, green, black, purple, gray Draw volume:1-10ml Specifications:12x75mm,12x100mm,13x75mm,13x100mm,16x100mm Material:plastic,glass
Available in Vacuum and Non-vacuum types
CE&ISO certified professional manufacturer of medical supplies lab consumables vacutainer since2009-Hebei Vacuum blood collection tubes are applicable to the clinical blood test and the blood cells analysis The internal walls of the tubes are coated with different additives designed to stabilize and preserve the specimen prior to analytical testing *Red: Non-additive - Serum *Red: Clot Activator-Serum *Yellow: Gel & Clot Activator -Serum *Purple: ETDA K2 / ETDA K3 - Whole blood *Black: 3.8% Sodium Citrate (1:4)- Whole blood *Blue: 3.2% Sodium Citrate (1:9)- Whole blood or Plasma *Green: Lithium Heparin / Sodium Heparin-Plasma *Grey: Glucose - Plasma
Product name:vacuum blood collection tube Type:Vacuum or non vacuum,micro blood collection tube Spec:Gel+clot activator tube,plain tube ,no additive tube, clot activator,tube,sodium heparin tube,lithium heparin tube,pt tube,3.2% sodium citrate tube,edta k3 tube,edta k2 tube,edta tube,ESR tube,3.8% sodium citrate tube,glucose tube sodium fluride tube,fluoride tube Cap Color:purple/Lavender/Red/Yellow/Blue/Green/Gray/Black Material:PET plastic or Glass Tube size :13*75mmï¼?13*100mm Volume:1ml,2ml,3ml,4ml,5ml,6ml,7ml Etc Shelf Life:2years Disinfecting Type:gamma ray Sterilized:yes Band:Chaoran Sample:Availible OEM:Available Certificate:CE/ISO
Aluminium Extruded 2024 Tubing Aluminium Extruded 5083 Tubing Aluminium Extruded 5086 Tubing Aluminium Extruded 6061 Tubing Aluminium Extruded 6063 Tubing Aluminium Extruded 7075 Tubing Suppliers nbsp ProductAluminium tubes BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating4 based on 3 reviews priceStart from 20 USD Stock Size Range OD 1 through 16 Walls 065 through 200 Shapes Rounds squares and rectangles Specifications Transportation industry Marine industry Solar and renewable Energy Building and construction both commercial and residential Military and Defense Electrical bus conductors Compressed gas storage Alloy designations The aluminium industry has created a system using a fourdigit numerical designation to identify wrought aluminium alloys The first digit indicates the major alloying element The second digit indicates whether there was a modification in the basic alloy The third and fourth digit indicates the specific alloy Grades 2024 5083 5086 6061 6063 7075
