High density and elasticity foam Coolmax fabric Rides over 5 hours Wicking Antibacterial Packing with carton of size for : 40*70*80CM
Our main exporting brand of refractory bricks are: Direct bonded magnesia-chrome bricks ííííthe product is manufactured by taking high purity magnesia and high quality chrome as raw materials through the process of high pressure moulding and high temperature burning.It has a good thermal shock resistance and volume stability and is applied in the cement and glass industries. Main physiochemical property indexes of product Chemical composition and technical performance Product brand Lzmg-5 Lzmg-8 Lzmg-12 Lzmg-15 Mgo(%) í²70 í²65 í²60 í²55 Sio2(%) ín1.5 ín1.5 ín1.8 ín1.8 Cr2o3(%) í²5.0 í²8.0 í²12.0 í²15.0 Apparent porosity(%) ín18 ín18 ín18 ín18 Cold crushing strength(mpa) í²40 í²40 í²40 í²40 0.2mpa refractoriness under load t0.6(oc) í²1650 í²1650 í²1650 í²1650 Thermal shock resistance(1300oc air cooling) í²20 í²20 í²20 í²20 Also we specially in exporting submerged entry nozzle, sliding plate, ladle and tundish nozzles and well block, etc. Herewith please find some typical refractory material which we have been exported for your reference: Ladle, tundish nozzles and well blocks Item Chrome corundum nozzle Corundum nozzle Al2o3-sic-c nozzle Spinel-c nozzle Lt-70 nozzle Lt-85 nozzle Upper porous nozzle for Tundish Al2o3 (%)í² 90 93 65 55 70 85 80 Cr2o3 (%)í² 2.5 13(mgo) 2.5 C (%)í² 22 7 10 7 3 A.P. (%)ín 2.9 24 8(impre-gnated) 8(impre-gnated) 15 15 24 B.D. (g/cm3) í² 1790 2.95 2.7 2.7 2.7 2.9 Refractoriness (íµ) í² 1550íµx3h 1790 Linear change on reheating(%) +0.1-+0.3 1600íµx3h +/-0.5 Wooden pallets
Fused cast azs block has strong glass corrosion resistance and high thermal shack stability. The products are adopting superior material, with process by special arc furnace forming it. This fuse cast technology got nearly no suffers from electrode pollution. Application Can be used at parts where chemical erosion is serious and temperature changes frequently, such as fire spurting mouth and regenerator joints, end port of furnace etc Wooden pallets
Coco Peat Blocks and Bricks are used in growing plants without soil. We are coco peat block exporter from India certified by Coir Board Of India. Coir piths are mostly used to be for purpose of holding the water and feeding the roots of plants. Meanwhile, the coir pith contains rich minerals and nutrients. Coco Peat Specifications Material Coco Husk Electrical Conductivity Both Low and High Compression Ratio 5:1 Ph Value 5.5- 6.5-7 Type Blocks and Bricks Shape Square, Rectangle, Circular Ash 2.2% Washed yes (Elite) Color Dark Brown
The content of magnesium ramming material is above 84%, calcium oxide is controlled at 6%~8%, and ferric oxide is about 6%. Due to its high fire resistance, the service temperature reaches 1850~1950. With the use of superfine powder technology, make the material with high CaO magnesia and ultrafine iron oxide, can fully in the process of calcining synthetic reaction, generating distribution evenly throughout the material 2 calcium ferrite, and no obvious shrinkage phenomenon in the sintering process, ensuring the quality of the material of the sintering synthesis and improve the effect of the use of the material at the same time.After being sintered at 1600â?? for 3 hours, the compressive strength of the sample can reach 40~50MPa, which basically meets the compressive strength indexes required by nickel iron smelting.Therefore, after a certain temperature (not less than 1200â??), the material has high density, high compressive strength, good erosion resistance and volume stability. Magnesium ramming material is used in the bottom of the hot nickel iron furnace. Magnesium ramming material has good heat preservation and insulation property, which can reduce heat loss, improve furnace temperature, shorten smelting time and reduce smelting power consumption.The compactness of the forged furnace lining is good, which solves the local leakage phenomenon caused by the non-compactness of the formed magnesia brick masonry furnace lining. The use of magnesia ramming material to build the nickel-iron furnace has obviously improved the lining life cycle, reduced the consumption of refractory materials, and replaced the shaped materials with amorphous materials, which is over the water.
In 23 * 11 * 8 cm/piece of floral foam quality standards: 1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements. 2.Foliage green in color. 3.Density: 25KG/M³ 4.Water absorption time: ABT. 1 minute (60 secs) 5.Dry brick weight: 45g(+/- 3g) 6.Wet brick weight: 2000g (+/- 15g) 7.Water drainage / leakage: 0g 8.Cell Structure: Fine 9.Brown water: No 10.PH level: PH 5.8-6.5 11.Water retain period: 7 days & above (Depend on the local climate)
In 23 * 11 * 8 cm/piece of floral foam quality standards: 1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements. 2.Foliage green in color. 3.Density: 25KG/M³ 4.Water absorption time: ABT. 1 minute (60 secs) 5.Dry brick weight: 45g(+/- 3g) 6.Wet brick weight: 2000g (+/- 15g) 7.Water drainage / leakage: 0g 8.Cell Structure: Fine 9.Brown water: No 10.PH level: PH 5.8-6.5 11.Water retain period: 7 days & above (Depend on the local climate)
In 23 * 11 * 8 cm/piece of floral foam quality standards: 1. An open-celled phenol foam that readily absorbs water and is used as a base for flower arrangements. 2.Foliage green in color. 3.Density: 25KG/M³ 4.Water absorption time: ABT. 1 minute (60 secs) 5.Dry brick weight: 45g(+/- 3g) 6.Wet brick weight: 2000g (+/- 15g) 7.Water drainage / leakage: 0g 8.Cell Structure: Fine 9.Brown water: No 10.PH level: PH 5.8-6.5 11.Water retain period: 7 days & above (Depend on the local climate)
nductivity 4.Good heat insulating effect and energy-efficient 5.Good thermal shock stability. 6.Corrosion and erosion resistance 7.Long service life 3.Application Fire clay insulating brick can not be in direct contact with the flame, this insulating brick can be used as inner lining brick of industry kilns wall and industry furnance.Such as blast furnace, hot blast stoves , electric arc furnace, cement kiln, melting furnace, ignition furnace, flue, refining equipment, heating equipment and piping, regeneration device, gas furnace, soaking furnace, annealing furnace, heat reaction chamber and other thermal industrial equipment. On wooden pallets with plastic cover Pallite size:1.05*1.05m
Soft inside but hard outside with a special multi-layered high-density foam core for maximum protection and shock absorbency. *Features an adjustable lace-up on top and a adjustable padded back hook and loop closure for a secure fit. As well as a curved chin protector and a wind shield on the ear protector to simulate real competition
* This is ever best and high quality PU leather boxing also available in cow hide leather in regular colors. * Molding: Handmade mold padded of multi layers of different density standard sheets as Laytex sheet Eva Sheet sponge/foam gel and soft linear lining. * Molding: High density machine injected mold. * This give fighter expected grip with its closing system
* This is ever best and high quality boxing also available in cow hide leather in regular colors. * Molding: Handmade mold padded of multi layers of different density standard sheets as Laytex sheet Eva Sheet sponge/foam gel and soft linear lining. * Molding: High density machine injected mold. * This give fighter expected grip with its closing system
* This is ever best and high quality cow hide leather in regular colors. * Molding: Handmade mold padded of multi layers of different density standard sheets as Laytex sheet Eva Sheet sponge/foam gel and soft linear lining. * Molding: High density machine injected mold. * This give fighter expected grip with its closing system
Model: X150 Thermal Conductivity W/(m.K):0.028 Compressive strength (kPa): 200 Nominal Density (kg/m3): 26-28 Fire behavior: Class C Oxygen Index (%): 27.4 Applicable temperature: 227;C Size (mm): 1200*600*50 Surface: Smooth planing Edge: Flat Key Features: 1; Able to resist repeated freeze/thaw cycles 2; High density, tough and durable, not easily damaged 3; Dimensionally stable, cryogenic secondary foaming 4; Flame-retarded, light weight, thermal bridge breaker, easy to install 5; ECO, ODP, GWP: zero Ozone Depletion Potential, low global warming potential, the 1st manufacturer which uses CO₂ foaming technology in China, each piece of insulation board dedicates love for global environmental protection causes. Application: Insulation & Energy-saving for roof, floor and walls.
Feature: - Oversized, curved design and attached thumb. - Designed to withstand the intense, daily training sessions of the serious martial artist - High-density, rubber latex foam ensures maximum impact absorption and minimizes impact to your hands and your opponent - Specialized nylon lining keeps your hands cool and comfortable - These gloves are easy to put on and take off while wearing full-size handwraps - Made from full-grain, premium leather Style: Indoor Sports, Outdoor Sports
Feature: - Oversized, curved design and attached thumb. - Designed to withstand the intense, daily training sessions of the serious martial artist - High-density, rubber latex foam ensures maximum impact absorption and minimizes impact to your hands and your opponent - Specialized nylon lining keeps your hands cool and comfortable - These gloves are easy to put on and take off while wearing full-size handwraps
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Fiberglass rebar area of application Fittings made of composite materials are a product of new technologies, the technical characteristics of which make it possible to successfully use it as an alternative to traditional steel fittings in construction of: Foundation; Marine and port facilities; Reinforcement of concrete tanks; Repair and strengthening of bearing capacity of brick and reinforced concrete structures; Road slabs, airfield slabs; For the production of small architectural forms; For the road paving and decking of highway bridges; The implementation of the infrastructure elements in the chemical industries; Repair of damaged brick and reinforced concrete structures; Fittings are used for constructions based on gypsum binders; Construction of swimming pools and industrial pools; The application of fiberglass fittings in civil and industrial construction is caused by many variables: Low specific gravity; High corrosion resistance; Low thermal conductivity of composite materials; High strength, several times the strength of steel fittings; Is a dielectric; Durability; As known, the main drawback of traditional low-carbon steel fittings is a low index of corrosion resistance, which limits their use in the construction of marine facilities and constructions located in the zone of variable water level.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Properties: Model: X250 Thermal Conductivity W/(m•K): 0.023-0.028 Compressive strength (kPa): 250 Nominal Density (kg/m3): 31-32 Fire behavior: Class E Oxygen Index (%): 27-33 Applicable temperature: Minus 50¡ãC-Positive 75¡ãC Max. Size (mm): 2400*1200*150 Surface: Smooth planing, embossing & slotting, peel removal Edge: Flat, lap joint, tenon, rain gutter Key Features: Ø Able to resist repeated freeze/thaw cycles. Ø High density, tough and durable, not easily damaged. Ø Dimensionally stable, cryogenic secondary foaming. Ø Flame-retarded, light weight, thermal bridge breaker, easy to install. Ø ECO, ODP, GWP: zero Ozone Depletion Potential, low global warming potential, the 1st manufacturer which uses CO₂ foaming technology in China, each piece of insulation board dedicates love for global environmental protection causes. Application: Heat preservation & insulation for building, floors, parking platforms, and other moisture-proof insulation etc. As required.
