Peripheral Iv Catheter 22 Gauge 1 Inch Suppliers and Manufacturers

Our 20G IV Cannula sets the standard for secure and efficient intravenous access. This medical device boasts a finely-calibrated 20-gauge size, offering a delicate balance between patient comfort and rapid fluid delivery. Crafted from biocompatible materials, it reduces the likelihood of allergic reactions or infections. The cannula's sharp, beveled tip ensures minimal pain during insertion, enhancing patient comfort. Equipped with secure wings for stability during placement and a color-coded hub for quick size identification, it simplifies the medical process. Packaged sterile for aseptic handling, our 20G IV Cannula is the trusted choice of healthcare professionals, guaranteeing reliable and precise vascular access for a wide range of medical needs.

Product Features: 1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 1 Small size and light weight, Maintenance-free 2 Environmental protection and pollution-free materials, no heavy 3 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 4 Built-in BMS management system with comprehensive protection and monitoring control functions 5 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 6 Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

1 All-in-one design, high integration and space saving installation 2 Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years 3 Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability 4 Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage 5 BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range 6 CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability 7 System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell 8 Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; 9 Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed Performance characteristics 10 Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range 11 Built-in BMS management system with comprehensive protection and monitoring control functions 12 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells 13 Main control MCU can be centrally controlled and manage peripheral settings (AC charger, inverter, solar charger) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable

Handcrafted beaded handbag, clutch, shoulder bag. Material = cotton fabric,beads Size = L= 11 inch, h = 7inch (1 inch = 2.5 cm) size = L = 10inch, H = 7 inch Customized design are available as per your requirement.

Origin: Vietnam Color: natural brown. Moisture: 8% max. Made from medium to long fiber. 100% natural, well cut, smooth surface.

Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)

Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface

Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface

can provide some general information based on the components mentioned. HAKKO SONOGUIDE: HAKKO is a company that produces a range of medical products, including medical devices and equipment. PTC Needle (PTCB:18G*200mm): "PTC" likely refers to a percutaneous transluminal catheter or a similar medical device used for procedures like angioplasty. "18G*200mm" indicates the gauge and length of the needle. In this case, it suggests an 18-gauge needle with a length of 200mm.

IV Cannula without Injection Port & without Wings Product Code: MED 161 Specifications: Sterile, Individually Packed in Peelable Blister Pack Size/Strength: 14G, 16G, 17G, 18G, (45mm), 20FG(32mm), 22FG(25mm), 24FG, 26G (19mm) Description Siliconised stainless steel back cut needle for easy and painless vein puncture. Made of Biocompatible FEP material has smooth outer surface. It allows quick visualization of venous return. Soft and Transparent Needle Cover to prevent accidental damage to needle or catheter

PRICE - Negotiable PRODUCT ORIGIN - Bulgaria / European Union Key Specifications/Special Features - Purity: 99,0% Admixture: 1% Moisture: max 8% Harmonization System (HS) Code - 120400000 Minimum Order Size - 22 MT Packaging details - In bulk or 25kg PP bags

Coriander Whole Seeds Crop: 2015 Origin: Bulgaria Quantity - 100 Mt. Specification: Purity : 99% Admixture (plant Origin) : Max.1% Broken Seeds : Max.3% Humidity : Max.10% Color: Melange (yellow To Light Brown) Packing: 25kg Pp Bags Shipment: 1 X 40’ Hc Fcl Container X 22-23mt Loading: 3-5 Business Days After Signing A Contract

Safety IV Cannula Product Code: MED 159 Specifications: Sterile, individually packed in peelable blister pack Size/Strength: 14 G, 16 G, 17 G, 18 G, (45 mm), 20 FG(32 mm), 22 FG (25mm), 24FG, 26G (19mm) Description Passive, irreversible activation of safety mechanism Needle sharp tip is enclosed inside a plastic cage after pulling out. The Plastic cage is designed as such that once needle sharp is fully enclosed inside it cannot come out of the cage hence prevent the healthcare professionals from the risk of accident due to needle stick injury of injection. Injection port with one way silicone injection valve

Price - Rs 800/ pair Minimum Order Quantity: 36 pair Footwear Type : Heels Sandal Type : Wedge Sandal Material : Faux Leather Pattern : Plain Occasion / usage : Formal Wear Sole Material : TPR Upper Material : PU Heel Height : 1 inch Packaging Type : Pair Flexibility : Not Flexible Toe Shape : Open Toe Fastening Slip : On Country of Origin : Made in India Women's Casual Sandals Size: UK 4 to UK 9, UK 3 to UK8 Color: Grey and Golden MOQ: 48 pairs Ocassion: Casual Upper Material: PU leather Sole Material: TPR (Material of the sole can be customised if quantity is higher than MOQ) Additional Information: Delivery Time: Depends on the Country Packaging Details: Pair of footwear packed in box and further packed in Master Carton.

Price - Rs 500/ pair Minimum Order Quantity: 100 pair Footwear Type : Ladies Flat Sandal Material : TPR Size( UK / India ) : All Sizes Color : All Colors Occasion / usage : Casual Wear Pattern : Plain Sole Material : EVA Upper Material : PU Heel Height : 1 inch Country of Origin : Made in India Women's Casual flat Sandals These sandals can also be used as daily wear by using orthopedic sole. Size: UK 4 to UK 9, UK 3 to UK8 Color: Brown, white MOQ: 36 pairs Ocassion: Casual and Semi Formal Upper Material: PU leather Sole Material: PU Slip Resistant (Material of the sole can be customised if quantity is higher than MOQ)

Size: 0.7m - 1.5m. Color: natural brown Moisture: 5% max. Loading: 1*20ft = 12 tons, 1*40ft = 22 tons Production time: 20 days

Offer HSM 1& 2 we can offer Grade: Steel Heavy Melting Scrap Metal HMS-1 as defined in the US ISRI Scrap specification circular 2020, predominantly composed of un-used / surplus oil pipes, disincorporated assets, sold as scrap metal and in the following proportions: Minimum 100% HMS 1 according to ISRI 200/201/202 with a minimum thickness of 6mm each lot. Specifications: Max. Dimension: 1.2 MTS. Thickness: 6 mm. Diameter: 2 7/8 Inches - 20 Inches. Impurities Tolerance: 0.75% Max. Oversize Tolerance: 1.5% Max. Max. Weight per Piece: 300 Kg Max. Stowage Factor: The oil pipes / tubes in a manner, to guarantee a stowage factor of Max of 65 cubic feet per ton. SELLER warrants making best efforts to avoid the inclusion of any of the following items: - Impurities such as but are not limited to dirt, dust, soil, oil, grease, rubber, sponge, concrete, stones, rocks, excessive rust, or other waste products such as wood, plastic, foam, and fabric. Off-Grades such as but are not limited to non-ferrous metal in a free state, enameled and all other metallically coated materials, alloyed material, incinerated scrap, mill scales, slags, skulls, turnings, borings, punching, drillings, bundle scrap, wires, and tin cans. Inclusions of the above elements shall be negligible and limited to amounts that are unavoidable in the customary preparation of the grade. SELLER guarantees that the oil pipes is free from any radioactive material, explosives, and other hazardous material: Radioactive Material measured as above local background level, Explosives such as but not limited to arms, weapons, bombs, mines, hand grenades, explosive material in any form, cartridges, whether charged, empty or un-spent, as well as parts thereof - shock absorbers, gas cylinders, improperly cut/opened hollow vessels or containers, Hazardous Material such as but not limited to asbestos or asbestos-containing material, flammable material, chemicals not limited to free toxic chemicals, organic matters originated from animals or plants with the danger of epidemic diseases, medical waste and any Origin: South Am�?�¯ï¿½?�¿ï¿½?�½?�¯�¿�½?�?�©rica Country Xxxxx Quantity: 25,000 Metric Tons +/- 5 % as the first delivery and after this delivery an agreement will be made for the next loads of more than 25,000 MT for a total of 300,000MT per year, each latest shipment date must be adequately and precisely defined in the agreement. Sales Unit Price: USD ($) Xxx per Metric Ton CIF Port Packing: in Bulk. Materiel should be loaded safely, and proper care should be taken to ensure that the material can be unloaded in a safe manner.

Product name: Bamboo Half Pole Material: Natural bamboo Original of place: Vietnam Dimension: 20 inch â?? 51 cm 22 nich â?? 56 cm 24 inch â?? 60 cm 26 inch â?? 66 cm 28 inch â?? 76 cm 32 nich â?? 81 cm 34 inch â?? 86 cm 36 inch â?? 91 cm 38 inch â?? 96 cm 40 inch 101 cm Packing: in bag or without bag Loading: 28 MT/ cont 40ft MOQ: 1 cont 40ft

Product name: Bamboo Half Pole Material: Natural bamboo Original of place: Vietnam Dimension: 20 inch -51 cm 22 nich - 56 cm 24 inch - 60 cm 26 inch - 66 cm 28 inch - 76 cm 32 nich - 81 cm 34 inch - 86 cm 36 inch - 91 cm 38 inch - 96 cm 40 inch 101 cm Packing: in bag or without bag Loading: 28 MT/ cont 40ft MOQ: 1 cont 40ft