Zamak
Ferro Molybdaen Specification: Mo=66-70%, Cu=0.3-0.6%, P=0.03-0.4%, S=0.08-0.12%, Si=0.6-1.1%, c=0.03-0.07% Iron flanks
Ferro molybdenum Mo: 60%min cu: 0.50%max c: 0.10%max P: 0.10%max si:1.5%max s:0.10%max Packing : 250kgs steel drums on pallets
Ferro silicon Specs: Si 75% min al 2.0%max C 0.2% max p 0.04%max S 0.02% max Size: 10-60mm 90%min In plastic woven bag, 1mt net each
Indium ingot Indium ingot, bismuth ingot In:99.9942% Pb:0.0007% Cu:0.0005% Cd:0.0007% Sn:0.0010% Fe:0.0006% Tl:0.0007% Al:0.0005% Zn:0.0006% As:0.0005% Indium ingot : packed in iron drums or packed in wooded cases
Ferrosilicon/Ferrosilicon Powder/Ferrosilicon Slag FeSi Ferrochrome FeCr Ferro Manganese FeMn Ferrosilicon manganase FeSi Mn
Garde: C276, B-2 Size : All
Baienwei Al-Si alloys(Si content from 27%70%) is a silicon particles reinforced aluminum matrix composites formed by improving Si supersaturation in aluminium matrix. AlSi controlled expansion alloys have the features such as low CTE, low density, high thermal conductivity, high electrical conductivity(excellent EMI/RF shielding performance), high hardness,good thermo-mechanical stability,hermeticity, machinability, platability and compatible with microelectronic assembly technology etc. Baienwei offers exclusive and customized services according to customers industry attributes.
We are manufacturer of beryllium metal, beryllium oxide, beryllium fluoride, aluminum beryllium master alloy, beryllium copper master alloy, beryllium copper alloy(C17000, 17200, 17300, 17410, C17500, C17510, JK520, JK38, etc).
Range: 3.17 MM TO 350 MM DIA Round BarsNickel Alloy ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ) ASTM / ASME SB 164 UNS 4400 (MONEL 400 ) ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ) ASTM / ASME SB 446UNS 6625 (INCONEL 625) ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
HASTELLOY B-2 alloy (UNS N010665/ W.Nr. 2.4858) is is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids. Hastelloy alloy b 2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media. Premature failure may occur if alloy B-2 is used where iron or copper is present in a system containing hydrochloric acid. Industry users like the resistance to a wide range of organic acids and the resistance to chloride-induced stress-corrosion cracking. Hastelloy B2 alloy resists the formation of grain boundary carbide precipitates in the weld heat-affected zone, making it suitable for most chemical process applications in the as-welded condition. The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance. Alloy B-2 also has excellent resistance to pitting and stress corrosion cracking. Application Superior resistance to hydrochloric acid, aluminum chloride catalysts and other strongly reducing chemicals. Excellent high-temperature strength in inert and vacuum atmospheres. Hastelloy B-2 alloy is a nickel-molybdenum alloy particularly suited for equipment handling reducing chemical environments . Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid. Temperature uses vary from ambient temperature to 1500 F depending on the environments
We, AUBERIT, a trading company incorporated under the laws of Brazil, with full corporate responsibility, declare our firm intention to sell to you the commodity described below, under the following terms and conditions: 1. COMMODITY, ORIGIN Niobium, Rondônia State, Brazil 2. TOTAL QUANTITY SPOT 50 metric tonnes 3. TOTAL QUANTITY AGREEMENT 20 metric tonnes, 12 months 4. PRICE USD 25.000 per tonne 5. LOADING PORT Porto Velho Port, Brazil 6. INCOMTERMS FOB 7. DESTINATION TBD 8. DELIVERY Immediate 9. YEAR OF PRODUCTION 2018 10. PACKING Plastic bags 11. INSPECTION According to buyerâ??s needs
heat resisting alloy series: GH2132; GH3030; GH 3128; GH4145; GH4169; GH 4080
Advantages of Aluminum Titanium Carbon (Al-Ti-C ) (AlTi5C0.20, AlTi3C0.15) 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy: 1. High fluidity allowing faster casting speeds 2. Better Homogeneity of the alloy and uniformity of the structure 3. Reduction of the crack tendency during solidification 4. Improvement of the surface quality 5. Enhancement of mechanical properties 6. Increase of the strength and toughness of aluminum alloy Chemical Composition AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Fengyue Aluminum Titanium Boron will provide the following advantages to Aluminum Alloy: 1.Improve the strength and toughness of aluminum alloy. 2.Eliminate columnar grains and feathery grains. 3. Improve the intrinsic quality of aluminum products by reducing the internal shrinkage cavities, porosity, hot cracking and segregation. 4. Increase more flexibility during the plastic deformation of the subsequent processing in the casting by improving its ductility 5. Reduce surface defects of aluminum product by improving its ductility. 6. Improve calendering rate and productivity on the premise of ensuring the quality of products. 7. Increase the using time of the calendering molds and auxiliary equipments on the premise of ensuring the quality of products. 8.Make the surface of aluminum more beautiful by improving the surface treatment of aluminum products Chemical Composition AlTi5B1: Ti:4.5-5.5% B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi3B1: Ti:2.5-3.5 B:0.8-1.2% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.2: Ti:4.5-5.5% B:0.15-0.25% Fe:0.3%Max Si:0.2%Max V:0.1%Max AlTi5B0.6 Ti:4.5-5.5% B:0.55-0.65% Fe:0.3%Max Si:0.2%Max V:0.1%Max Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Advantages of Aluminum Titanium Carbon(Al-Ti-C ) - AlTi5C0.20 1. Nucleation rate of Titanium Carbon Aluminum Grain Refiners is Five Times as quick as Aluminum Titanium Boron. The desired modification effect will be seen in three minutes after Al-Ti-C is added. Refining effect of aluminum is very significant and the refining time could keep 45-60 minutes. 2. Effectively reduce the pinholes of aluminum foil as sizes of heterogeneous grain Tic is sub-micron, widely dispersed and disaggregated, so it's perfect for the process of aluminum foil. 3. Titanium Carbon Aluminum master alloys is much purer than Al-Ti-B, as potassium fluoridate isn't added during the production of AlTiC Grain Refiner 4. Reduce the inclusion content and eliminate the oxide layer and defects on the surface because of no TiB2 agglomeration in Al-Ti-C master alloys. 5. Al-Ti-C alloy can bring A356 Aluminum alloy wheels better mechanical property and higher elongation rate when used as grain refiner than the best Aluminum Titanium Boron. 6. Al-Ti-C alloys have more advantages for the casting production of aluminum alloy for nuclear industry which cannot include boron. Shape and Packages Cut Rod: 9.5-10MM in diameter, 500-1000MM in length, 1000KGS / pallet or wooden case Coil: 9.5-10MM in diameter, 180-220 KGS /coil, 3 coils/ pallet Small Ingot: 25KGS/carton, 1000KGS/pallet Cast cut bar: According to the length of the bar Customer-made products for accurate and easy use could also be supplied.
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Star products: mainly produces products that forms a complete set for products as oil filter, plumbing, fire fighting etc., including various series hydraulic filter casting housings, oil and gas separator housings, marine copper valves, meter boxes, marine navigation bridge frames, as well as other aluminum alloy & copper castings ect., which is characterized with high pressure resistance, anti-corrosion and anti-wear, therefore has acquired world wide good reputation with excellent quality.
Hard Alloys can replace tablets completely ,user can enjoy lower costs ,less wastage,and higher aluminium product quality.