Peristaltic pump, syringe pump, dosing pump, dispensing pump.
Product name: Flue Gas Desulfurization Pump Model: Flue Gas Desulfurization Pump Application: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas Product overview Flue gas desulfurization pump Overview: FGD pumps are sailed Pump Company in LC-T series slurry pump, the successful design manufactured on the basis of experience, in view of industrial flue gas desulfurization pump characteristics, absorb with similar products within and outside the advanced technology, well-developed The new generation of series desulfurization pumps. Dedicated to the absorption tower circulating pump PH: 2.5 to 13 chlorine ion concentration: ¹60000ppm weight concentration:¹60% Medium temperature: ¹100C. Absorber circulation pump is large FGD key equipment, means there is high demand for its reliability and service life. FGD means more than half of the power consumed for driving the absorber circulation pump. Therefore, the circulating pump should have a high efficiency. Hydraulic design of the pump design and selection of materials flow components directly related to the efficiency of the pump operation, reliability and service life. We developed the absorber circulation pump, pump, pump cover over-current parts are made of 2605N material, impeller, wear plate is used Cr30A material. Hydraulic design of the pump, drawing the French company J S phase flow pump design and manufacturing technology, and the use of modern CAD, CFD technical correction. Second, the flue gas desulfurization pumps structural features: (1) The pump is single-stage single-suction centrifugal pumps, which form in practice has proved to be particularly suitable for FGD absorber circulation pumping device abrasive, corrosive slurry. (2) The impeller, wear plate without using mouth ring seal in the form, set the port ring will be slurry rapid wear, leading to the rapid decline in the efficiency of the pump. (3) having an axial adjustment structure, the impeller can be easily adjusted to maintain an axial gap between the impeller and the wear plate and the front cover, so as to maintain the high efficiency of the pump. It is always easiest to maintain and the most effective and efficient way to pump operation. (4) is arranged in the form of pump is "pull" structure. This allows the pump impeller during disassembly, mechanical seals and shaft assembly without removing the inlet and outlet pipes. (5) bearing with thin oil lubrication. Bearing mounted on a rubber ring secondary seal removable bearing box, to prevent dirt and water from entering. (6) The shaft is a large diameter, short axis head can reduce shaft deflection at work, thus extending seal life. Third, the flue gas desulfurization pump design advantages: Overview: back pull-out design of the entire rotor assembly can be pulled from the motor, easy to maintain, the pump can remain in the pipeline, without removing the motor. 1. Front pull-out design wear plates, impellers, mechanical seal can be disassembled inlet end 2. bearing bracket can be adjusted to improve the wear resistance 3. The bearing lubrication oil immersion 4. Pump: pump pressure and wear of sufficient size, materials used 2605N, weldable, volute tongue wear some special treatment, tangential flow channel outlet, the body set foot supporting way. 5. Wear plates: the part is mounted between the pump and imported materials Cr30A, this material has excellent resistance to abrasion and erosion resistance, overall performance, thereby extending the life of the pump and impeller. 6. Impeller: material Cr30A, not welded, taking into account the long run is more economical, since the bearing holder can be adjusted when the situation abrasive wheel, the wheel can be re-processed and prolong life. Front blade structure prevents large particles rushed impeller and wear plate gap, the leading blade and wear plate gap, reducing the media (in impeller and wear plate) flow rate, reducing wear, special blades wear process design, back blade design, reduced axial force, but also to block large particles, high pressure bearing design (simulation without axial force hydraulic model back under the blade), the 7. impeller vent design, can be discharged within the gaseous medium, to prevent dry running mechanical seals. 8. After the pump cover: materials used 2605N, weldable, wear usually occurs in the back of the blade area, the pump head is mounted on the bearing bracket, release stress and allow greater wear and prolong the service life of the pump cover bolts fixed bearing frame for easy disassembly without the card and damage to the pump when dismantling the mechanical seal. 9. A bearing body: the bearing body consists of two parts, the carrier and the bearing housing, the bearing housing and the adjusting screw can be adjusted by means of bolts, move horizontally within the carriage. This has the advantage: in the bearing housing to move the carriage (reprocessing size according impeller), but the inner and outer bearing ring without relative displacement, since no relative displacement, seals fully functional. When removing the lower part of the reservation on the base for easy removal, position accuracy, the installation will not occur mutual jamming of parts. 10. Mechanical seal: The mechanical seal is designed to Single seal cartridge structure, easy disassembly. Wash design there are two options: one, loaded wash water pipe fixed wash water; of the two, without a fixed wash water line, segmental wash. In the mechanical seal the work area, if the medium containing gas, mechanical seals would run dry, so the impeller is designed with vents, you can avoid large, dirty particle contact mechanical seal. Easy emptying drainage pump seal cavity volume, full lubrication, cooling sufficiently. Flue Gas Desulfurization Pump
Product name THM-3C slurry pump Type THM pump size 4/3 Capacity 86.4-198m3/h Head 9-52m Allowable Max. Power 30kw Speed 1000-2200r/min NPSH 4-6m Introduction Model Explanation and Performance Chart: THM-3C T: Tower pump H: High Concentration M: Metal lined 3: Discharge size (inch) C: Frame type with maximum power Introduction of Slurry Pump ---- THM Series THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc. The features of this kind of slurry pump The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only. Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication. The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance. Main application of this kind of slurry pump This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc. Pump Model THM Series Impeller Dia. Allowable Max.Power Clear Water Performance Capacity Q Head H(m) Speed n(r/min) Max.Eff. ¦Ç% NPSH (m) m3/h l/s THM-1B 15 12.6-28.8 3.5-8 6-68 1200-3800 40 2-4 152 THM-1.5B 15 32.4-72 9-20 6-58 1200-3200 45 3.5-8 184 THM-2C 30 39.6-86.4 11-24 12-64 1300-2700 55 4-6 214 THM-3C 30 86.4-198 24-55 9-52 1000-2200 71 4-6 245 THM-3D 60 THM-4D 60 162-360 45-100 12-56 800-1550 65 5-8 365 THM-4E 120 THM-6E 120 360-828 100-230 10-61 500-1140 72 2-9 510 THM-6R 300 THM-8ST 560 612-1368 170-380 11-61 400-850 71 4-10 686 THM-10ST 560 936-1980 260-550 7-68 300-800 82 6 762 THM-12ST 560 1260-2772 350-770 13-63 300-600 77 3-10 965 THM-14ST 1200 1368-3060 380-850 11-63 250-550 79 4-10 1067 exported wooden crate
Specifications Top quolity diesel water irrigation pump 1.high suction head 3.stainless steel, cast iron impeller 4.sewage pump pass 76mm 1.Beautiful shape and fine structure,reliable performance. 2.With strong capacity of delf priming, no need to equip with flap valve. 3.Non-clog, and with powerful capacity of passing big solid.. 4.The hole can make sure that stronger sewage can be cleaned quickly when pump is jammed. 5.The unique lubrication oil mechanical seal cavity makes the performance more reliable. 6.Special check valve structure can make the pump working quickly. 7. When working, the gas and liquid works together . 8. Low rotary speed,reliable operation,long time usage, easy to maintenance. 9.Advanced pressure protector make pump the pump work safe. 1.Inlet/Outlet 2''(50mm), 3''(75mm), 4''(100mm), 6''(150mm), 8''(200mm), 10''(250mm), 12''(300mm) 2.Impeller Diameter 158.74mm-457.2mm 3.Rotary Speed 550RPM-2150 RPM 4.Flow Rates 8m3/h-1275m3/h 20GPM-5500GPM 5.Head 6m-63m 6.Horsepower 1HP-125HP 7.N.W 92KG-998KG 8.G.W 114KG-1066KG 9.Solid Passing 20.63mm-76.2mm 10.Material Cast Iron, ADI, CD4MCU, 316 SS, Alloy 20, C276. 11.Diesel Driving Water cooled or air cooled 12.Method of Connection Self-priming pumps are available as basic units or may be flex-coupled, V-belt driven or engine mounted. 13.Drive Variation Cummins, Deutz, Ricardo, Perkins or Chinese Diesel, Electric Motor 14.Skid Mounted on Trailer 2 or 4 wheels Trailer/Trailor,Cart 15.Package Exporting plywood case 16.Certification CE , ISO9001:2000 Standard export wooden
Detailed product description Model: qwb, qzb Discharge: 5 to 6000 m3/h (1.4-1666.7l/s) Lift head: 6 to 80 m (19.7- 262.5 feet) Max. Rotary speed: 2900 r/min Pump outlet diameter: 50-600mm (2-23.6 inch) Temperature: -5 to +50 deg. C Maximum system pressure:
1. All in one design,install and maintain conveniently. 2. water and electricity system is completely separated, assure using safely 3.the water temperature is set freely within 30-55 4.with magnesium nod inside. 5.Intelligent control 6.Compact design with 200L/250L/300L available for option 7. Stainless steel tank inside, plus 50mm insulation 8. Refrigerant R407c and R410a are available for option 9.Automatic defrosting function included. 10.Electrical heating element inside as back up for emergent request 11 Stainless steel or other colors cabinet for option 12.50HZ and 60HZ are both available 13. The tank is available to have pipe coil inside for the external heating source, such as heat pump, boiler or solar system. Heating Capacity 2.6KW COP 3.4 Certificates CE,CCC, ISO9001. Carton box or plywood
More than 750,000 submersibles have been successfully installed using Sudarshan uPVC Submersible Pipe upto depths of 1150 feet. Sudarshan uPVC Submersible Pipe is manufactured in different Dia – 1” to 4” in various ranges suitable for different depths and different pump delivery pressure. We manufacture Sudarshan Submersible Pipe using double stage bi-axial orientation technology & thread using CNC machines to ensure high precision. Stringent on-line quality checks, rigorous testing in our laboratory and continuous R&D activities over a decade helps us provide our customers with unmatched quality. Sudarshan uPVC Submersible Pipe unique feature is that it can sustain submersible pump high hydrostatic pressure, which is maximum in the bottom most pipes connected to the pump and can withstand the high tensile load of pump and entire submersible filled with water, which is maximum in the top most pipes. Sudarshan uPVC Submersible Pipe is most suitable for submersible pump and a perfect alternative to conventional G.I pipes. SEPL is marketing its submersible pipe all over India through a 240 distributor network and successfully exporting to GCC and Africa. Features: Square threads – Made on CNC Machines for high precision. They enable tension free grip & easy fitment. These are high friction threads on load which do not open even on constant forward and reverse torque of the pump. Rubber Gasket & Profile ‘O’ Ring – Permanent side is fitted with rubber gasket & temporary side with profile ‘O’ Ring to absorb pump vibration & to make it leak proof. ‘O’ Ring Locking System – Provides permanent lock between coupler and pipe as well as absorbs tension from torque generated by pump, providing incredible grip. Thick & Thin – Ends of the pipe are thicker than the barrel of the pipe so that even after threading there is maximum strength in the pipe. Biaxial Orientation Technology – Provides higher tensile strength and impact resistance Comparative Performance of uPVC Submersible Submersible Pipes. Criteria SEPL uPVC Submersible Pipe G.I. / M.S Pipe HDPE Pipe Life Span Long Life-Estimated life designed for 30 years; Pipes & its square threads do not deteriorate due to corrosion or rusting; and are designed to have high load capacity 5 to 10 years Pipes and its threads get damaged due to rusting and corrosion. Very Limited life Low strength, gets damaged under high pressure in span of 2 – 3 years Energy & Fuel Consumption; & Flow of Water Smooth Inner Surface leads to low frictional loss, providing higher output & Low energy and fuel consumption Rough inner surface leads to higher frictional loss; Hence consumes more energy and fuel, & gives higher water output Relatively Rough inner surface – lower output, higher energy consuption. Maintenance : Low Maintenance Very high maintenance; Rusting of threads needs periodic removal for rethreading of pipes and cleaning rust deposits Relatively High Maintenance Leakage Rubber ‘O Ring Locking System’ and rubber seals at the joints makes it completely leak proof Always Leaks – Pipe joints are not pressure tight, rusting of joint threads Pressure can cause leakage in pipes Installation: Light weight 3 metres length pipes are easy to install & remove Pipes are very heavy and difficult to handle, requiring great efforts in installation & removal Easy to install Advantages of Sudarshan uPVC Submersible/Submersible Pipe: Long life span upto 30 years Lower investment - 30% cheaper than GI Pipe 30% Lower operational cost – smooth inner walls give higher output and save power Suitable for Food Grade – GI pipe is unfit as it contaminates water due to rusting No corrosion or rusting No maintenance required Easy to install and uninstall No bacterial growth Physical & Mechanical Properties: Property Unit Standard Specific Gravity 1.4gms/cm3 - Vicat Softening Temperature 87.3 C as per ASTM D 1525 Technical Specifications of Sudarshan Submersible / Riser Pipe for Submersible Pump : Sl Size & Type OD - Outside Dia ND - Nominal Dia Ultimate Breaking Load (Kgf) Suitable Load (Kgf) safe allowable hydrostatic Pressure (Kgf/Cm2) Maximum Installation depth (Feet) Maximum Installation depth (Meters) OD: 33mm (1") ND:25 mm 1 Deluxe 1200 720 21 700 210 2 Super Deluxe 1800 1080 30 950 300 OD: 42mm (1.25") ND:32 mm 3 Deluxe 1800 1080 21 700 210 4 Super Deluxe 2500 1500 27 900 270 5 Heavy 3000 1800 35 1100 350 OD: 48mm (1 1/2") ND:40 mm 6 Deluxe 2500 1500 21 700 210 7 Super Deluxe 3000 1800 27 900 270 8 Heavy 4000 2400 35 1100 350 OD: 60mm (2") ND:50 mm 9 Super Deluxe 3750 2250 21 700 210 10 Gold 4500 2700 27 900 270 11 Heavy 4800 2880 27 900 270 12 Super Heavy 5700 3420 35 1150 350 OD: 75mm (2 1/2") ND:65 mm 13 Super Deluxe 4800 2880 17 550 170 14 Gold 6000 3600 21 700 210 15 Heavy 7200 4320 27 900 270 16 Super Heavy 9000 5400 35 1150 350 OD: 88mm (3") ND:80 mm 17 Super Deluxe 6900 4140 17 550 170 18 Gold 8100 4860 21 700 210 19 Heavy 9600 5760 27 900 270 20 Super Heavy 12600 7560 35 1150 350 OD: 113mm (4") ND:100 mm 21 Super Deluxe 9900 5940 17 550 170 22 Gold 12600 7560 21 700 210 23 Heavy 16000 9600 27 900 270 24 Super Heavy 20500 12300 35 1150 350 NOTE: We manufacture other pressure rating pipes & pipes of OD: 140mm (5") ND: 125mm on request WEIGHT CARRYING CAPACITY OF SUDARSHAN UPVC SUBMERSIBLE PIPE WITH PRESSURE RATING OF 21KGF/CM2, SUITABLE FOR SUBMERSIBLE PUMP INSTALLATIONS UPTO 210 METRES (700 FT) DEPTH Size & Type PIPE WEIGHT (Kg) For 210m Length Submersible Water Weight (Kg) For 210m Length Pump Set Weight (Kg) Approx. Cable Weight (Kg) Approx Total Weight (Kg) Max Load Capacity (Kg) For Pulling with Chain Pully Or Crane Ultimate Breaking Load (Kg) 1'' Deluxe 123 105 65 55 348 720 1200 1.25'' Deluxe 140 193 85 55 473 1080 1800 1.5'' Deluxe 182 266 130 55 633 1500 2500 2'' Super Deluxe 273 455 200 75 1003 2280 3800 2.5'' Gold 483 711 270 75 1539 3600 6000 3'' Gold 647 1022 350 95 2114 4860 8100 4'' Gold 1015 1733 500 145 3393 8100 13500 Selection of Pipes The pipe should be selected such that the pump delivery pressure does not exceed the hydrostatic allowable pressure of the pipe. Example: Pump Delivery pressure: 24kg/cm2 Pipe outlet Size & Pipe Size: 2’’ (50mm) Nominal Diameter 2’’ Super Delux recommended permissible pressure: 21kg/cm2 2’’ Heavy recommended permissible pressure: 27kg/cm2 In such case, 2’’ Heavy pipe should be selected. INSTALLATION PROCEDURE 1. First connect the male end of C.I/ M.S/ S.S bottom adaptor to submersible borewell pump using chain wrench. 2. Join the Sudarshan Pump Guard to the bottom Adaptor along with M.S/ S.S flange rod. 3. Now connect the first pipe to the female end of the pump guard. 4. Before connecting the pipes and pump guard, clean the threads with clean water and check for proper fitment of rubber sealing. 5. While fitting of pipe hold the coupler by hand / wrench. 6. Tighten the pipes by hand, until the rubber sealing in the pipe end completely enters into the coupling. However for better grip strap wrench can be used to hold/ tighten the pipes. 7. At the time of lowering the pump into submersible, the clamp must be fastened only to the portion marked as “Clamp Here”, i.e. just below the coupler. 8. Then all the other Sudarshan Submersible pipes can be connected the same way. Pipe wrench should not be used for support. 9. Once the top submersible pipe reaches the ground level, connect the top adaptor with male end connection. 10. Finally from the ground level regular plumbing accessories can be used to transfer water to required delivery point. Do not use oil on square threads of Sudarshan Submersible Pipes. Clean the threads with normal water and check the proper fitment of rubber sealing element INSTALLATION CONDITIONS: Full casing of bore well is recommended for long life of bore and pump. It prevents the pump from getting stuck due to lose boulders and stones. It also reduces chances of accident due to protruding stones and boulders at the time of removing the pump and pipe. In areas with loose soil & silt, Bore collapse problem may be more than in rocky areas. However, even rocky areas may have loose boulders. Hence, it is advisable to use full casing. PRECAUTIONS: Avoid Dry Run of Pump During dry run the submersible pump gets heated up and may damage or deform only the first pipe connected with the pump. Ways to avoid the dry running/ damage or deformation of the pipe: - Use timer switch to turn on or off the pump automatically as per the pre-set time. Pre-set time must be determined after assessing the bore yield to ensure pump does not run in dry condition. - Use of 3 metres of Steel Pipe between pump and SEPL uPVC Submersible Pipe will help dissipate the heat, preventing any damage or deformation. However, if the deformation is happening in any pipe other than the one connected to the pump, it is due to high pump pressure and wrong pipe selection. Prevention of Water Hammer At the time of pump stoppage, water recedes/falls at tremendous speed from a height. Especially in deep bore wells of about 500 ft & above, this creates enormous pressure and load on the pump and bottom most pipe called as water hammering. For such deep bore wells, it is recommended to make a 3mm hole in the pump NRV to protect the pump and pipe from water hammering. Handling & Storage of Pipes - Check for any visible damage to pipes during transit and inform immediately. - Avoid contact of pipe with any sharp objects. - Do not throw or drop the pipes from truck to the ground. - Store it in covered areas to avoid exposure to sunlight & UV rays - Stack pipes on even grounds with stack height not more than 7feet - Place alternate layers of pipes/bundles perpendicularly, with each layer forming a square. - Stack lighter pipes above the heavier ones, if pipes are of same diameter - Keep the stacking surface dry.
“Sabar” 10"Submesible Pumpset - Water Filled are in Three Phase suitable for 10" & above bore well size. The Head range is from 4 Mtrs. to 264 Mtrs. & Discharge Range is from 50 LPM to 4000 LPM. Motor HP Range is from 15 HP to 125 HP. Pump Stage range is from 1 Stage to 13 Stages. The Salient Features of 10" Submersible Pumpset - Water Filled are as under : 1) Wet type, Water Cooled Rewindable Motors 2) Withstands wide voltage fluctuations 3) Most of the models have ISI marks 4) Available with Stainless Steel & bronze MOC 5) Long life due to study construction. The Applications of 10" Submersible Pumpset - Water Filled are as under : 1) Field Irrigation 2) Private / Public Water Supply 3) Fow / Drip / Sprinkler Irrigation 4) High Rise building water supply 5) Fire Fighting. Standard Export Wooden Box Packing.
High quality electro spinning multi-needle Laboratory Syringe Pump ZS100 is an injection pump with high precision and dual channel , it supports for a variety of work mode. The 4.3-inch color LCD tou-ch screen can set parameter quickly. Many instruction light confirm working condition accurately.This product support for multiple syringe to choose,to meet the needs of different experimental flow quantity, high precision control, and has the hard and soft protection agencies and alarm mechanism.Supporting for injection and extraction four working modes. Built-in RS-485 communication,Supporting the Modbus agreements, wide range power input, adapt to various occasions.
Advangtage 1. 2.8 inch tft lcd screen 2. 4-8 hours battery support 3. User friendly, easy and customized operation with numeric keypads 4. Customized drug library according to clinical use 5. Record of last setting for all parameters 6. Automatic antibolus to ensure higher safety 7. Standard rs232 for internal & external communication 8. Multiple infusion mode for different infusion requirement 9. Special designed extension line clamp to ?x the line 10. Ideally suitable for ot, iccu, nicu, picu, and normal wards infusion etc 11. International units more than 10 group, .Mg/kg/min, mg/kg/h, ug/kg/min, ug/kg/h, etc 12. Night mode to decrease the lightness and voice of pumps for patient's good rest at night. Specifications 1.Channel:single 2.Syringe size:5, 10, 20, 30, 50/60ml 3.Drug library:default 9-12 drugs, can be updated&added to 2000 4.Infusion modes:rate mode, time mode, body weight mode, night mode, sequential mode(optional), pause mode(optional) 5.Accuracy:+/-2% 6.Volume range:0.1-9999.9ml 7.Flow rate step by:increments at 0.1ml/h 8.Flow rate range/purge/bolus rate/top flow rate:5 ml syringe 0.1ml/h-150ml/h; 10ml syringe 0.1ml/h-300ml/h; 20ml syringe 0.1ml/h-600ml/h; 30ml syringe 0.1ml/h-900ml/h; 50/60ml syringe 0.1ml/h-1500ml/h 9.Audible&visible alarms:self test failure, syringe dislocation, occlusion, near end, low battery, battery exausted, vtbi completion, syringe empty, motor malfunction, incorrect syringe specification, circuit malfunction, internal communication malfunction, master cpu malfunction, monitoring cpu malfunction 10.Kvo:1ml/h 11.Power supply:ac 100-240v, 50hz/60hz; dc 11.1v lithium battery 12.Battery: 8 hours 13.Power consumption:25va 14.Dimension&weight: 315mm*120mm*140mm, 2.4kg 15.Classification:class ii, type cf, ipx4 16.Optional function:event log with at least 2000 history records
Motor is wet type submersible motor, simple structure High strength water resistant insulation nails, winding wires, strong water resistance, insulation performance is good Pumps installed directly on the motor shaft, compact structure small volume, light weight, high efficiency and reliable operation Bearing with high wear-resistant copper alloy sliding bearing and stainless steel shaft sleeve, and guarantee the motor run smoothly without noise, long service life 7QS10-120-7.5101207.51.5" 8QS10-144-7.5101447.51.5" 9QS15-26-2.215262.21.5" 10QS15-52-4155241.5" 11QS20-30-3203032" 12QS20-45-4204542" 13QS20-54-5.520545.52" 14QS20-67-7.520677.52" 15QS20-81-7.520817.52" 16QS25-17-2.225172.22" 17QS25-26-3252632" 18QS25-34-4253442" 19QS25-45-5.525455.52" 20QS32-26-4322643" 21QS32-39-5.532395.53" 22QS32-52-7.532527.53" 23QS40-16-3401633" 24QS40-21-4402143" 25QS40-25-5.540255.53" 26QS40-30-5.540305.53" 27QS40-40-7.540407.54" 28QS65-7-2.26572.24" 29QS65-10-3651034" 30QS65-18-5.565185.54" 31QS65-25-7.565257.54" 32QS80-13-4801344" 33QS80-16-5.580165.54" 34QS80-22-7.580227.54" 35QS100-4.5-2.21004.52.24" 36QS100-9-4100944" 37QS100-12-5.5100125.54" 38QS100-17-7.5100177.54" 39QS120-10-5.5120105.55" 40QS125-12-7.5125127.55" 41QS150-10-7.5150107.55" 42QS160-4-3160435" 43QS250-5-5.525055.55"
Membrane Filters, Syringe Filters , Filter Paper, Glass Vials, Septa And Caps, Vacuum Filtration Manifolds & Diaphragm Vacuum Pump, Flash, Hplc Column And Spe Cartridge, Pipette & Tips For Pipette And Bottle Top Dispenser, Quechers And Extraction Thimbles.
Medical infusion pump, medical iv infusinp pump, veterinary infusion pump, medical syringe pump, syringe infusion pump, veterinary syringe pump, medical enteral feeding pump, tube feeding pump, nutrition pump, fluid infusioin warmer, blood warmer.
Defibrillators syringe and infusions pumps dializers ventilator.
Color touch LCD display Multiple infusion modes High water proof level Long battery time Detailed parameters 4.3ã?? color touch LCD display with text and image ±2% high accuracy to make sure safe infusion 7 infusion modes to satisfy different infusion requirements Use 2, 5, 10, 20, 30, 50/60ml syringes Easy calibration and automatic recognition of syringe size Programmable and support change rate during infusion Automatic and manual bolus DERS (Drug error reduction system) DPS (Dynamic pressure system) Big storage for history records and drug library Waterproof level IP34 Up to 11 hours battery life Inter-lockable and free combination between syringe pump and infusion pump
Medical disposable, infusion pump, syringe pump.
410 stainless steel is a stainless steel grade produced in accordance with American ASTM standards, which is equivalent to 1Cr13 stainless steel, S41000 (American AISI, ASTM). 0.15% carbon, 13% chromium, 410 stainless steel: good corrosion resistance, machinability, general purpose blades, valves. 410 stainless steel heat treatment: solution treatment (�¢??) 800-900 slow cooling or 750 fast cooling.Features: high strength; excellent machinability; hardening after heat treatment; magnetic; not suitable for harsh corrosive environments. 410 stainless steel is a type of martensitic stainless steel that contains 11.5-13.5% chromium and has excellent corrosion resistance, high strength, and hardness. It is a magnetic material and can be hardened through heat treatment, making it suitable for use in various applications that require high strength and corrosion resistance. Some of the key properties of 410 stainless steel include: Corrosion resistance: 410 stainless steel is highly resistant to corrosion, including water, steam, and chemical environments. However, it is not suitable for use in highly acidic or alkaline environments. Hardness: 410 stainless steel has high hardness and strength, making it suitable for use in applications that require wear and abrasion resistance. Heat treatability: 410 stainless steel can be hardened through heat treatment, allowing for improved strength and hardness. Magnetic properties: 410 stainless steel is magnetic and can be used in applications that require magnetic properties. Some of the common applications for 410 stainless steel include: Cutlery and kitchen utensils Valve components and pump parts Bolts, nuts, and screws Springs and bearings Medical instruments and dental tools Oil and gas equipment Overall, 410 stainless steel is a highly versatile material that is well-suited for use in various applications where high strength, corrosion resistance, and hardness are required. Here are some of the most common international standards for 410 stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276: Standard Specification for Stainless Steel Bars and Shapes ASTM A479/A479M: Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels EN 10088-3: Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes JIS G4303: Stainless steel bars GB/T 1220: Stainless steel bars We can provide the following the form:410 stainless steel coil; 410 stainless stee strip;410 stainless stee plate; 410 stainless steel sheets; 410 stainless steel tubes; 410 stainless steel pipe;410 stainless steel flat; 410 stainless steel bar General blades, mechanical parts, tableware class 1 (spoon, fork, knife, etc.).
Syringe filters, membrane filters, stirrers, pumps, mixers, baths circulators, solvent filtration apparatus, ultrasonic cleaners, column heaters, shakes, stainless steel manifold systems.
infusion pump and syringe pump.OEM, ODM, export
(1)main technical parameters 1.Length / width/ height(mm) 8274/2400/3276 2.Total weight(kg) 19/18 3.Control mode of working arm remote control 4.Distance between support legs(m) width/length 2.65/6.22 5.Bearing force (kn) front/back 110/110 6.Noise criteria (db) 110 7. Spraying capacity (m3) 5-30 8. Max vertical spraying distance (m) 16.8 9. Max horizontal spraying distance (m) 14.5 10. Arm telescopic range (m) 2 11. Forearm travel range (m) 2 12. Disel power (kw/hp) 82/110 Velocity (1/min) 2500 Brand: cummins 13. Concrete pump Hydraulic pump velocity (1/min) 1480 S type pipe valve working pressure (bar) 190 Theoretical flew capacity (min/max) 4/30 m3/h (2)technical background Wet type concrete sprayer is construction equipment which is widely used in fields such as underground engineering, geotechnical engineering and municipal engineering. Due to various reasons in the past, dry type spraying machine is main spraying equipment. However, more and more wet type concrete sprayers are put into market because of people¡¯s increasing environmental awareness and great requirements on quality of gunite concrete. At present, it is demanded to use wet type concrete sprayer in design of railway tunnel and underground engineering construction. The wet type concrete sprayer meets users demands on concrete spraying supporting work in tunnel construction process and realizes intelligent control of shotcreting homework Hzsp30 wet type concrete sprayer is made up of chassis system, work device system, hydraulic system, electrical system and cab Packing: container or nude packing Length / width/ height(mm) 8274/2400/3276
