Fire Blanket Using Instruction: 1. Place the product on the wall at a easily noticed and reached location or inside a drawer. 2. When fire accident occurs, quickly take out the product with both hands pulling the 2 black tapes. 3. Open up the product and hold it in your hand as if you are holding a shield. 4. Use the product to cover up the fire lightly and at the same time, cut off electricity or gas. 5. While the product is covering up the fire, use other measures to distinguish the fire until it is completely off. 6. After the fire has been completely distinguished, take off the product when it has been cooled down and treat it as an inflammable trash. 7. In case the clothes of a person are on fire, please wrap the person with the product to distinguish the fire and call #120 immediately. Important Notes: 1. Firmly fix the product in an easily noticed and easily reached location (e. G. Back of the entrance door, inside the cabinet of your bed head, inside the cabinet of your kitchen, trunk of your car etc. ). 2. Inspect the product every 12 months. 3. In case any damages or dirt observed on the product, please replace it immediately. We sale and export fire extinguishers, fire hose and fire safety devices from China.
Fire hose Water system Technical parameter 1)the lining of fire hose is pvc, rubber or copy rubber . And the jacket of fire fighting hose is woven by high intensity of polyester filament or polyester short-fiber( twill/plain ). 2)there are special adhesive ( solid or liquid)between the jacket and the hose. The canvas hose is soft and highly polished, reduce the flow resistance 3) the fire hose is thinner and softer, lighter and more convenient to use. 4) the fire hose is high pressure resistance, low temperature resistance, anti-corrosion, aging resistance, wear-resisting. 5) we supply different color lining of fire hose : blue, black, transparent, etc or according to your requirement
Our Eco friendly fire starters are made up of compressed sawdust and 100% pure natural paraffin wax. They are powerful enough to start any outdoor fire. It is a best alternative for matches and lighters to start fire.
We are a fire equipment distributor in China, we provide fire fighting hydraulic equipment; Water pumps and other fire-fighting equipment.
Fire RID is a scientifically advanced automated fire fighting solution highly effective in extinguishing fire it is filled with a Non-toxic and Eco friendly chemical solution that automatically activates at elevated temperature is case of a fire there by extinguisher hazardous fire immediately. what set Fire RID a part is that it is stylish,simple to install, requires no maintenance and is less spaces consuming as compared to other conventional fire extinguishers.
Product Origin : Vietnam Key Specifications/special Features : Specific Quotation According To Customers' Requirements
1. Fire Hose Lining: PVC/Rubber/PU/EPDM 2. Fire Hose Jacket: High Tenacity Polyester Yarn or Fiber 3. Fire Hose size: 1 Inch-10 Inch (25mm-250mm) 4. Working Pressure: 8-25 Bar 5. Bursting Pressure: 24-72 Bar 6. The length of fire hose: 10m-30m, Or Customized 7. The color of fire hose: White/Red/Customized 8. There are special adhesive ( solid or liquid)between the jacket and the hose. The fire hose is soft and highly polished, reduce the flow resistance. 9. The fire hose is thinner and softer, lighter and more convenient to use. 10. The certificate of fire hose: CCCF, ISO9001:2008, CE(EN14540) 11. The usage of fire hose: fire-fighting/ irrigation/agriculture
1. Fire Hose Lining: PVC/Rubber/PU/EPDM 2. Fire Hose Jacket: High Tenacity Polyester Yarn or Fiber 3. Fire Hose size: 1 Inch-10 Inch (25mm-250mm) 4. Working Pressure: 8-25 Bar 5. Bursting Pressure: 24-72 Bar 6. The length of fire hose: 10m-30m, Or Customized 7. The color of fire hose: White/Red/Customized 8. There are special adhesive ( solid or liquid)between the jacket and the hose. The fire hose is soft and highly polished, reduce the flow resistance. 9. The fire hose is thinner and softer, lighter and more convenient to use. 10. The certificate of fire hose: CCCF, ISO9001:2008, CE(EN14540) 11. The usage of fire hose: fire-fighting/ irrigation/agriculture
Name: Fire Sprinkler Norminal Diameter(mm): DN15 or DN20 Thread Standard: NPT/BSPT Material: Brass or Zinc Surface Finish: Chrome/Natural brass/White Temperature Rating: 57/68/79/93/141/182 Celsius Degree Response: Standard/Quick K-factor: 5.6(80)/8.0(115) Working Pressure: 1.2Mpa/175Psi
canvas fire hose fire hose pipe/fire hydrant. 1)PVC/ Rubber/ PU Lining 2)Working pressure:0.8MPa,1.0MPa,1.3MPa,1.6MPa 3)Bursting Pressure:24Bar,30Bar,39Bar,48Bar,60Bar or according to your requirement 4)Colors of Outside Jacket and Inner Lining: As per Customers' Requirements 5) Thinner and more soft, lighter and more convenient to use. 6) High pressure resistance, low temperature resistance, anti-corrosion. aging resistance.wear-resisting 7) We can provide different color lining: blue, black, transparent, etc or according to your requirement 8) We can provide length: 10m - 30m or according to your requirement
fire sprinkler 68 degree 1/2'' bsp and npt threads
fire sprinkler 68 degree 1/2'' bsp and npt threads
fire sprinkler 68 degree 1/2'' bsp and npt threads
Material of rope: high-strength polypropylene (nylon) Material of rung: epoxy resin Diameter of rope: 18mm-20mm Diameter of rung: 23mm Length of rung: 33cm Span: 36-37cm Length of ladder: 5m, 10m, 15m, 20m, etc Static load ¡¨¹ 450kg 20m rope ladder weights about 15kg. 15m rope ladder weights about 11kg. 10m rope ladder weights about 8kg.
1: Optimal Sealing by O-Ring Highly durable Teflon O-Ring was used and special coating was done at the contacting point of O-Ring to ensure perfect Sealing and secured operation at fire detecting. 2: Shock proof structure with steel ball support method With 8 steel ball support structure for shock esistance, it Is reliably safe from external impact and free from damage And leakage 3: Low Assembly Load By minimizing the assembly load with o-Ring Sealing Method, safety is secured with low pressure inside the Head. 4: Excellent Design As the head is installed in the building, aesthetic design By minimizing heat detecting with small head was made.
metal fire pit size:68*68*51cm carton size:70*15.5*70cm
Looking For Bulk Buyers For The American Product, Fire Fighting Foam Afff 3% Alcoholic And Non Alcoholic Resistance
Fireproof and explosion-proof stove decoration glass, make your stove more beautiful, let you enjoy the flame dancing. Special tempered glass for fireplace, factory direct, your first choice
china coal0001 18660760281 .Fire-fighting Infrared Thermal Imager Keywords:thermal imager, infrared thermal imager, hand held thermal imager, china made thermal imager, thermal camera, handheld infrared thermal imaging camera Introduction of Fire-fighting Infrared Thermal Imager Infrared thermal imaging system can be the human eye can not see the infrared radiation energy converted to electrical signals, and to prepare a different color to express different temperature distribution of visual images show. These visual data signals can assist you in finding the abnormal temperature, which can be found the potential problems of the equipment or system. 1.160*120 uncool FPA detector 2.With temperature measurement function 3.Unique fire-control color palette 4.Apply to fire rescue 5.We are the manufacturer,the price is competitive 6.Portable,small size,lightweight 7.Finding people and identify location in fire place 8.Best after sales service 9.We are the manufacturer,we have price advantage Parameter of Fire-fighting Infrared Thermal Imager Items Technical Specification CC-2 Detector characteristics Detector type Un-cooled FPA micro-bolometer Array size/format 160x120 Image characteristics Field of view/min focus distance 30°22.5° Spatial resolution(IFOV) 3.3mrad Thermal sensitivity 0.1°C@30°C Frame frequency 50Hz Focus Fixed effective distance 50m Spectral range 8-14um Start-up time 25s@30°C Image display LCD 260,000 color 3.5" TFT LCD, 640x480 Measurement Temperature ranges -20°C-+ 600°C Measurement type Fixed spot Emissivity correction Fixed palettes 6palettes changeable(black and white, grey and grey inverted, 3 pseudo-color) Power source Battery type (NIMH) battery, rechargeable Battery operating time 2 hours continuous operation Battery recharge time 2 hours Battery recharge times More than 500 times Battery charging mode Intelligent charger Environment Operating temperature -15°C-- +50°C Short time operating temperature +50°C-+260°C Storage temperature -40°C- +70°C Encapsulation IP67(1 meter under water) flame retardant rating UL94-V0 Drop test 1m Physical characteristics Weight 1.3kg Dimension 190*128*273mm