Suitable for dragon fruit. Using specialized WFR spectrums to stimulate more flowering, increase yields by 2-3 times compared to not using a lamp in the off-season, and bear larger and sweeter dragon fruits. Save 55% energy compared to HQ Compact 20W lamps and up to 85% compared to incandescent lamps. Sealed structure, waterproof, and moisture-proof when installed outdoors; Power: 5W / 9W, saving-energy; Voltage: 100-277/120/220-240; Light Spectrum: White & Far Red; Power factor: 0.5 / 0.7 / 0.9; IP65 waterproof, dustproof; Life span: 20,000 hours (3 times longer than HQ Compact lamps, and 15 times longer than incandescent lamps); Comply with CE standard, can apply for other standards as requirements; Warranty: 2 years; OEM accepted;
Side/ Flap pasting Adhesives This grade is suitable for side flap sealing of mono-cartons in high speed machines like Bobst, Eureka, Yoko type of machines for bonding of laminated, UV Varnished and non -varnished surfaces etc. Also can be used for paper bag side & bottom pasting. Advantages : 1. The product is smooth flowing with good machine running characteristics. 2. Suitable for nozzle and cylinder application in high speed sealing machine. 3. Fast setting characteristics, gives undisturbed setting. 4. Retains paper tear of bond at -5°C & 70°C.
FKM, NBR, CR and other materials O-ring seals! The material size and color can be customized!
SKUs Available 180 Litre , 18 Litre Description: EP2 Grease NLGI2 is a premium, high performance extreme property grease, designed to deliver long lasting uniform lubrication under extreme thermal conditions. It increases the service life of lubricated parts as the EP additives provide a high degree of film stability to combat shock load fatigue & stresses. Specifications: Meets specification levels of NLGI2. Applications: Recommended for various heavy-duty greasing applications where heavy or shock loads are encountered. Product Benefits: Superior Anti-wear Properties Designed Especially for Extreme Pressure Conditions. Best for Protection Against Rust & Corrosion. Good Water Washout Characteristics. Increases the Service Life of Lubricated Parts as the EP Additives Provide a High Degree of Film Stability. It Crosses the Standards Set Under IS-7623 for Water Washout Characteristics.
Product: Iplex Grease 2/3 Description And Recommendation: Premium quality lithium based grease, specially formulated for use in a wide range of general & heavy duty applications in Industries. Viscometric / Consistency NLGI 2/3 Standards IS:7623 - 1993
Product: Bentex 2/2M Grease Description And Recommendation: Bentonite based non-melting type grease recommended for the high temperature applications in conveyer bearing, heat treating, autoclaves, kilns, tunnel ovens, plumber blades underground mining,etc. Viscometric / Consistency NLGI 2 Standards Proprietory
Product: Synthexx Grease 2 Description And Recommendation: Lithium-complex grease technology developed with the synthetic base stock, recommended for a wide range of automotive and industrial applications for extended drain intervals & longer bearing life. Viscometric / Consistency NLGI 2 Standards Proprietory
Product: MP Grease 2/3 Product Data Sheet Product Data Sheet. Description And Recommendation: Premium quality lithium based grease, especially formulated for use in a wide range of automotive applications. Viscometric / Consistency NLGI 2/3 Standards IS:12203
We can produce it according to the samples,customers'design and specification are accepted. We also can design and produce rubber mold and rubber products by ourselves.High quality and best price. We appreciate every customer and every order be it one piece or thousands.To get more details and any questions, please feel free to contact us .We are ready serve for you!
We specialise in providing a comprehensive range of auto parts & motor parts. Our commitment is to offer high-quality products that ensure optimal performance, safety, and reliability for all types of vehicles Here's a list of some of the auto parts we provide: 1. Engine Components: - Spark plugs - Oil filters - Air filters - Belts and hoses - Engine mounts - Timing belts/chains - Pistons & Rings 2. Braking System Parts: - Brake pads - Brake rotors/discs - Brake calipers - Brake lines - Master cylinders - Brake fluid 3. Suspension and Steering Parts: - Shock absorbers/struts - Control arms - Tie rod ends - Ball joints - Steering racks - Power steering pumps 4. Electrical Components: - Batteries - Alternators - Starters - Ignition coils - Wiring harnesses - Sensors (Oxygen sensors, ABS sensors, etc.) 5. Cooling System Parts: - Radiators - Water pumps - Thermostats - Radiator hoses - Cooling fans - Heater cores 6. Exhaust System Parts: - Exhaust manifolds - Catalytic converters - Mufflers - Exhaust pipes - Oxygen sensors - Gaskets and seals 7. **Transmission and Drivetrain Parts:** - Transmission fluid - Clutch kits - CV joints - Axles - Transmission mounts - Differential parts 8. Interior and Exterior Accessories: - Headlights - Tail lights - Mirrors - Wiper blades - Floor mats - Seat covers 9. Performance Upgrades: - Cold air intakes - Exhaust headers - Performance chips/tuners - Suspension lift kits - Turbochargers - High-performance brakes 10. Maintenance and Service Items: - Oil and lubricants - Filters (air, oil, fuel) - Sealants and adhesives - Cleaning and detailing products - Tools and equipment - Diagnostic scanners Our goal is to provide top-notch products, exceptional customer service, and competitive prices to ensure your satisfaction.
Hotmelt adhesive for Carton Sealing & Closing DescriptionSuitable for bonding on paper to paper / board especially for shipping carton sealing (Both varnished and unvarnished) in packaging industries. Advantages: 1. Quick bond formation result in higher production. 2. Strong bonding between paper to paper / corrugated board-especially for carton sealing. 3. Minimal fume//odor. 4. No string formation usage. 5. Suitable fo longer working without choking on filters in nozzle applications. 6. Designed for faster melting.
Number of passengers 2 Maximum load 200 kg Size 3450*1450*1300mm Net weight 615 kg Engine type 4-stroke twin engine Number of cylinders 4 Displacement 1500CC Compression ratio 9.5:1 Cooling system water cooling Starting System electric start Electrical System Battery :12V, 32A Starter motor: 380W Impeller Stainless steel / 4 pieces Fuel and oil Oil capacity :3.5L * 2 Fuel tank capacity :90 liters Recommended oil,:suitable for engine oil Recommended fuel:Gasoline 93 and above
A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom.[1][2][4] Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.[3] Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.
6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Description by Manufacturer ENGINE Engine Type V6 Bore x Stroke 3.63 x 3.00 in. (921 x 762 mm) Displacement 186 CID (3,046 cc) DIMENSIONS Shaft Length 25 in. (635 mm) Weight 528 lb. (240 kg) GENERAL Propshaft Horsepower 175 HP (131 kW) Full Throttle Operating Range 5000-6000 RPM Gear Ratio / Shift F-N-R Cooling Water-cooled with thermostat & pressure-controlled The Mercury Diesel Outboard is a diesel two-stroke designed for light duty commercial patrol boat applications. The EPA certified engine joins the U.S. Department of Defense spec diesel outboard Mercury Marine released in May 2015. The Mercury Diesel Outboard features exclusive spark ignition, direct fuel injected 2-stroke technology which enables it to run on readily available ultra-low sulfur diesel fuel. SPECIFICATIONS HP: 175 HP (131 kW) Engine type: V6 Displacement: 186 CID (3,046 cc) Displacement: 3.0 L Full throttle: 5000-6000 RPM Shaft length: 25 in. (635 mm) Gearcase ratio: 2.08:1 Dry weight *Lightest model available: 528 lbs (240 kg) Bore and stroke: 3.63 x 3.00 in (921 x 762 mm) Fuel system: 2-stage Direct Fuel Injection (DFI) Cooling system: Water-cooled with thermostat & pressure-controlled Gear shift: F-N-R Exhaust system: Through prop KEY FEATURES Available with a 25â?? (635 mm) center section and the 2:1 Fleet Master gearcase in both right-hand and left-hand rotation. Industry-exclusive spark ignition diesel engine. Glow plug ensures consistent, reliable cold starting. Commercial patrol boat models meet EPA emissions standards. Cylinder heads designed specifically for combusting diesel fuel. High performance cylinder liners for maximum horsepower and optimal engine running quality. Fuel/air mixture is injected into the combustion chamber at 95 psi for enhanced high rpm running quality.
Our commitment to blending / packing of lubricants and greases as per iso standards. All our products are blended at iso certified plants, at whichever location the products may be blended. Product range 1- petrol engine oils 2- tractor fluids 3- transmission fluids 4- marine engine oils 5- industrial fluids 6- diesel engine oils 7- coolant & anti freeze 8- brake fluids Packaging - ctn 12x1 l - ctn 4x4l - ctn 4x5l - pali 20l - drum 208l - iso tanks or flexi tanks Private labeling available Manufactured at iso certified plants Meet & exceed various api certifications Oem approvals Please don't hesitate to contact us.
Our commitment to blending / packing of Lubricants and Greases as per ISO Standards. All our products are blended at ISO certified plants, at whichever location the products may be blended. ----------------------------------------- PRODUCT RANGE 1- PETROL ENGINE OILS 2- TRACTOR FLUIDS 3- TRANSMISSION FLUIDS 4- MARINE ENGINE OILS 5- INDUSTRIAL FLUIDS 6- DIESEL ENGINE OILS 7- COOLANT & ANTI FREEZE 8- BRAKE FLUIDS ----------------------------------------- Packaging - CTN 12X1 L - CTN 4X4L - CTN 4X5L - Pali 20L - Drum 208L - ISO Tanks Or Flexi Tanks ----------------------------------------- Private Labeling Available ----------------------------------------- Manufactured at ISO certified plants Meet & exceed various API certifications OEM approvals ----------------------------------------- Please don't hesitate to contact us.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
