Hastelloy S is a nickel-chromium-molybdenum-tungsten alloy with excellent corrosion resistance in a wide range of aggressive media. It was developed by Haynes International, Inc. and is specifically designed for use in highly oxidizing environments. Hastelloy S offers superior resistance to oxidizing and reducing environments, including hot sulfuric acid, sulfurous acid compounds, and hydrogen chloride gas. It also exhibits excellent resistance to localized corrosion, such as pitting and crevice corrosion, and has good resistance to stress corrosion cracking. Due to its exceptional corrosion resistance, Hastelloy S is widely used in the chemical processing industry, especially for applications involving highly corrosive acids, such as sulfuric acid and phosphoric acid. It is also used in pollution control equipment and in the production of pulp and paper. Hastelloy S can be fabricated using a variety of methods, including welding, forging, and machining. However, it is important to use appropriate techniques and equipment to avoid damaging the material's corrosion resistance properties. Overall, Hastelloy S is a highly reliable and durable alloy that offers exceptional performance in highly corrosive environments. American Standards: ASTM B619: Standard specification for welded hastelloy S tubes ASTM B622: Standard specification for seamless hastelloy S tubes ASTM B626: Standard specification for hastelloy S welded and seamless pipe fittings ASTM B366: Standard specification for hastelloy S welded and seamless fittings ASTM B574: Standard specification for hastelloy S rods and bars ASTM B575: Standard specification for hastelloy S plates, sheets, and strips European Standards: EN 10095: Standard specification for hot rolled, forged, and cold worked hastelloy S plates, sheets, strips, rods, and wires EN 10216-5: Standard specification for seamless steel tubes for pressure purposes - technical delivery conditions - part 5: stainless steel tubes Japanese Standards: JIS NW 0276: Standard specification for hastelloy S plates, sheets, strips, rods, and seamless pipes JIS NW 625: Standard specification for hastelloy S welded pipes Chinese Standards: GB/T 14994: Standard specification for nickel-based hastelloy S welded seamless steel tubes GB/T 15007: Standard specification for nickel-based hastelloy S plates, sheets, and strips GB/T 15013: Standard specification for nickel-based hastelloy S welded and seamless pipe fittings GB/T 14995: Standard specification for nickel-based hastelloy S welded steel pipes GB/T 15014: Standard specification for nickel-based hastelloy S rods and bars. We can provide the following the products:Hastelloy S coil; Hastelloy S strip;Hastelloy S plate; Hastelloy S sheets; Hastelloy S tube; Hastelloy S pipe;Hastelloy S flat; Hastelloy S bar GB/JIS:NW0276/UNS:N06635/W.Nr:2.4687
Haynes 625 is a nickel-chromium-molybdenum alloy with niobium/tantalum added to enhance its corrosion resistance and strength at elevated temperatures. It is one of the most widely used superalloys due to its exceptional mechanical properties, high corrosion resistance, and ease of fabrication. Haynes 625 has excellent resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-containing environments, making it suitable for use in marine and chemical processing applications. It also exhibits high resistance to oxidation and scaling at elevated temperatures up to 1000â??, making it suitable for use in high-temperature applications such as gas turbines, furnace components, and heat exchangers. Haynes 625 can be easily fabricated by various methods including welding, forging, and machining. It can be used in both as-welded and annealed conditions. It is available in various forms such as plates, sheets, bars, and tubes, and is widely used in industries such as aerospace, chemical processing, oil and gas, and nuclear power. US standards: AMS 5599: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; AMS 5666: Specifies the standard specifications for Haynes 625 bars, wire, profiles, and forgings; AMS 5837: Specifies the standard specifications for Haynes 625 seamless or welded tubes; ASME SB 443: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; ASME SB 446: Specifies the standard specifications for Haynes 625 bars and forgings; ASME SB 444: Specifies the standard specifications for Haynes 625 seamless and welded tubes. European standards: EN 2.4856: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and wire; EN 10216-5: Specifies the standard specifications for Haynes 625 seamless steel tubes. Japanese standards: JIS NW 625: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and seamless tubes; JIS NW 6692: Specifies the standard specifications for Haynes 625 welded tubes. Chinese standards: GB/T 14992: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; GB/T 14994: Specifies the standard specifications for Haynes 625 welded seamless steel tubes; GB/T 15008: Specifies the standard specifications for Haynes 625 bars and forgings; GB/T 15010: Specifies the standard specifications for Haynes 625 seamless and welded tubes. We can provide the following the products:Haynes 625 alloy coil; Haynes 625 alloy strip;Haynes 625 alloy plate; Haynes 625 alloy sheets; Haynes 625 alloy tube; Haynes 625 alloy pipe;Haynes 625 alloy flat; Haynes 625 alloy bar GB/JIS:G4903/UNS:N06625/W.Nr:2.4856
Haynes 617 is a nickel-chromium-cobalt-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and excellent resistance to carburization and sulfidation. It is commonly used in gas turbine engine components, industrial furnace applications, and other high-temperature applications. Haynes 617 has a nominal composition of 44.5% nickel, 20-24% chromium, 8-10% molybdenum, 0.5% maximum copper, 0.15% maximum carbon, 1.0% maximum cobalt, 0.5% maximum silicon, 1.0% maximum manganese, 0.015% maximum sulfur, 0.015% maximum phosphorus, and the balance iron. Haynes 617 offers excellent mechanical properties at high temperatures, making it ideal for use in gas turbine engine components such as combustion liners, transition ducts, and exhaust systems. Its high-temperature strength and resistance to carburization and sulfidation make it suitable for use in industrial furnace applications such as radiant tubes, muffles, and retorts. In addition to its high-temperature strength and resistance to oxidation and carburization, Haynes 617 also offers good resistance to thermal shock and thermal fatigue. This makes it ideal for use in applications that require resistance to cyclic heating and cooling, such as gas turbine engine components and industrial furnace applications. Overall, Haynes 617 is a versatile high-temperature alloy that offers excellent mechanical properties and resistance to corrosion and oxidation in high-temperature environments. Its use in gas turbine engine components and industrial furnace applications has been well-established, and it continues to be an important material in these industries. US standards: AMS 5887: Standard specification for Haynes 617 plate, sheet, and strip; AMS 5888: Standard specification for Haynes 617 rod, wire, and bar; AMS 5889: Standard specification for Haynes 617 seamless or welded pipe; ASME SB 166: Standard specification for Haynes 617 rod, wire, and bar; ASME SB 167: Standard specification for Haynes 617 seamless pipe; ASME SB 168: Standard specification for Haynes 617 plate, sheet, and strip; ASME SB 564: Standard specification for Haynes 617 forgings. We can provide the following the products:Haynes 617 alloy coil; Haynes 617 alloy strip;Haynes 617 alloy plate; Haynes 617 alloy sheets; Haynes 617 alloy tube; Haynes 617 alloy pipe;Haynes 617 alloy flat; Haynes 617 alloy bar GB/JIS:NW 6617/UNS:N06617/W.Nr:2.4663
Haynes 718 alloy is a precipitation-hardening nickel-chromium alloy that offers high strength, toughness, and resistance to corrosion and high-temperature environments. It was developed in the 1950s for use in gas turbine engine components, and has since found a wide range of applications in other high-stress industries such as aerospace, nuclear, and chemical processing. The alloy is characterized by its excellent mechanical properties, including high tensile and yield strength, good ductility and toughness, and resistance to fatigue, creep, and stress-corrosion cracking. These properties are achieved through a combination of precipitation hardening and solid-solution strengthening, which involve heat treatment processes that cause the formation of fine, uniform precipitates within the metal matrix. Haynes 718 alloy also has good resistance to oxidation and other forms of corrosion, particularly in high-temperature environments. It is capable of maintaining its properties at temperatures up to around 1300�°F (700�°C), making it suitable for use in hot sections of gas turbine engines, nuclear reactor components, and other high-temperature applications. In addition to its mechanical and corrosion resistance properties, Haynes 718 alloy also has good weldability and machinability. It can be readily welded using a range of methods, and can be easily machined using standard metalworking techniques. Overall, Haynes 718 alloy is a versatile and reliable material that has proven itself in a wide range of demanding applications. Its combination of high strength, toughness, and resistance to corrosion and high-temperature environments make it an ideal choice for use in critical components where reliability and performance are paramount. Haynes 718 alloy standards vary by country. Here are some of the common ones: United States Standards: AMS 5596: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, Haynes 718 AMS 5662: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 AMS 5663: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5664: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5832: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718 AMS 5962: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, Haynes 718 AMS 5838: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718SPF We can provide the following the prodcuts:Haynes 718 alloy coil; Haynes 718 alloy strip;Haynes 718 alloy plate; Haynes 718 alloy sheets; Haynes 718 alloy tube; Haynes 718 alloy pipe;Haynes 718 alloy flat; Haynes 718 alloy bar GB/JIS:NW7718/UNS:NW7718/W.Nr:2.4668
Hastelloy X is a high-temperature, corrosion-resistant nickel-chromium-iron-molybdenum alloy. It has excellent high-temperature strength and good oxidation resistance up to 1200�°C, making it suitable for use in a range of applications that require resistance to high temperatures and harsh environments. Hastelloy X is often used in gas turbine engine components such as combustor cans, flame holders, and transition ducts. It is also used in industrial furnace components such as muffles and radiant tubes, as well as in chemical processing equipment and heat exchangers. This alloy has a unique combination of mechanical properties that make it suitable for use in high-stress applications at elevated temperatures. It has good ductility, high strength, and excellent resistance to thermal fatigue and thermal shock. Additionally, it has good resistance to both oxidizing and reducing environments, including wet chlorine and sulfuric acid. Hastelloy X is typically supplied in the solution-annealed condition, which provides good ductility and toughness. It can be easily welded using common welding techniques, and can also be formed and machined using standard methods. Overall, Hastelloy X is a versatile and reliable alloy that offers excellent performance in high-temperature, corrosive environments. Its unique combination of properties makes it an ideal choice for a range of demanding applications in the aerospace, chemical processing, and industrial sectors. Here are the international standards for Hastelloy X: American Standards: AMS 5536: Standard Specification for Heat-Resistant Nickel Alloy Plate, Sheet, and Strip. AMS 5754: Standard Specification for Superstrength Alloy Wrought Nickel Alloys. AMS 5798: Standard Specification for Welding Wire, Corrosion Resistant, Nickel Alloy, Hastelloy X. ASTM B435: Standard Specification for UNS N06002 Alloy Plate, Sheet, and Strip. ASTM B572: Standard Specification for UNS N06002 Nickel Alloy Round Bar. European Standards: EN 2.4665: Nickel and nickel alloys - Plate, sheet, and strip. EN 2.4666: Nickel and nickel alloys - Bars and wire. EN 2.4667: Nickel and nickel alloys - Seamless tubes. EN 2.4694: Nickel and nickel alloys - Welded tubes. Japanese Standards: JIS NW 0675: Nickel and nickel alloys - Plate, sheet, and strip. JIS NW 0676: Nickel and nickel alloys - Bars and wire. JIS NW 0677: Nickel and nickel alloys - Seamless pipes and tubes. JIS NW 0678: Nickel and nickel alloys - Welded pipes and tubes. Chinese Standards: GB/T 14992: Nickel and nickel alloys - Plate, sheet, and strip. GB/T 14994: Nickel and nickel alloys - Bars and wire. GB/T 14996: Nickel and nickel alloys - Seamless tubes. GB/T 14997: Nickel and nickel alloys - Welded tubes. We can provide the following the products:Hastelloy X coil; Hastelloy X strip;Hastelloy X plate; Hastelloy X sheets; Hastelloy X tube; Hastelloy X pipe;Hastelloy X flat; Hastelloy X bar GB/JIS:HR505/UNSï¼?N06002/W.Nrï¼?2.4665
Hastelloy C is a nickel-chromium-molybdenum alloy that provides excellent corrosion resistance in a variety of harsh environments. It is commonly used in the chemical processing, petrochemical, and power generation industries for its high resistance to a wide range of corrosive media, including strong oxidizing agents, reducing environments, and hot contaminated solutions. Hastelloy C also exhibits good thermal stability, making it suitable for use in high-temperature environments. Its thermal conductivity is 67 Btu�·in/(hr�·ft�²�·�°F) (9.7 W/(m�·K)), and its coefficient of thermal expansion is 7.7 �? 10^-6 in/in/�°F (13.9 �? 10^-6 m/m/�°C). In addition to its excellent corrosion resistance and mechanical properties, Hastelloy C is also weldable and easily fabricated into a variety of shapes and forms. It can be cold worked, hot worked, and annealed for optimal performance. Overall, Hastelloy C is a versatile alloy that offers exceptional performance in a wide range of harsh environments. Its combination of corrosion resistance, mechanical properties, and thermal stability make it a popular choice for demanding applications in the chemical processing, petrochemical, and power generation industries. US Standards: AMS 5750: Standard specification for Hastelloy C steel bars and shapes; AMS 5786: Standard specification for Hastelloy C welding wire; AMS 5771: Standard specification for Hastelloy C plate, sheet, and strip; AMS 5757: Standard specification for Hastelloy C seamless pipe and tube; ASME SB 574: Standard specification for Hastelloy C forged fittings. European Standards: EN 2.4819: Standard specification for Hastelloy C steel bars, wire, and forgings; EN 10095: Standard specification for Hastelloy C plate, sheet, and strip; EN 10216-5: Standard specification for Hastelloy C seamless steel tubes; EN 10217-5: Standard specification for Hastelloy C welded steel tubes. Japanese Standards: JIS NW 6222: Standard specification for Hastelloy C plate, sheet, and strip; JIS NW 6022: Standard specification for Hastelloy C rods and wires; JIS NW 6220: Standard specification for Hastelloy C seamless pipes and tubes; JIS NW 6221: Standard specification for Hastelloy C welded pipes and tubes. Chinese Standards: GB/T 15006: Standard specification for Hastelloy C bars, wires, and profiles; GB/T 15008: Standard specification for Hastelloy C plate, sheet, and strip; GB/T 15011: Standard specification for Hastelloy C seamless pipes and tubes; GB/T 15012: Standard specification for Hastelloy C welded pipes and tubes. We can provide the following the products:Hastelloy C coil; Hastelloy C strip;Hastelloy C plate; Hastelloy C sheets; Hastelloy C tube; Hastelloy C pipe;Hastelloy N flat; Hastelloy C bar GBï¼?NA1002/JIS ï¼?NW6022/UNSï¼?N06455/W.Nrï¼?2.4819
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
Forged Pipe Fittings offered comprise high pressure forged steel pipe fitting in different choices like elbow, street elbow, coupling, cap, bushing, swage nipple, reducer insert, pipe nipple and others with thread options of NPT/BSP and others as demanded by the customers. Some of the materials these can be offered in include carbon steel, stainless steel and others in size range of up to 4 or others with use in industry sectors like power station, nuclear power plants, natural gas, petrochemical, ship buildings, engineering fields and others
GOOD GRADE OCC WASTE PAPER SCRAP MADE IN USA GRADE 11 AND 12 Place of Origin : JAPAN, US, EUROPE Materials : Waste Paper Type : OCC, ONP, OMG, YELLOW PAGES, A3, A4 WASTE PAPER Color : Mixed & NOT MIXED Unit : Ton/Tons Minimum Order : 20 Tons Payment Term : T/T 50/50 and L/C 100% at sight Shipping Lines : Ocean shipping Estimate Lead Time : 15 - 20 days Shipping Origin : Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Bale (1.2-1.4 Tons/Bale), 20-25 Tons loading 40FT container
Product Range Design Code ASME Section VIII, Div I, PD 5500, AD Merkblatter, PED 97/23/EC, IS 2825 or any other international standard. Capacity Upto 500 M3 ( 5,00,000 Liters water volume) Diameter Upto 6 meters Shell & Dished End Thickness Upto 100 mm or more Weight Upto 250 tons Length Upto 60 meters, with suitable field joints. Material of Construction Carbon Steel, LTCS, NACE & HIC resistant Material, Low Alloy Steel for high temperature service (SA 387 Gr 11 and Gr 22), Cladded Steel (CS with SS, Cupronickel, Aluminum Nickel Bronze, Aluminum brass, Titanium, Inconel and many more), SS (300 & 400 series), Duplex & Super Duplex stainless steel, Cupronickel, Monel , Inconel, Nickel & Nickel Alloys, Hastelloy, Titanium, Aluminum & Aluminum alloys.
Product: Forged Fittings Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.8, based on� 22� reviews price: Start from� 10� USD TYPE : Socket Weld (S/W) & Screwed (SCRD) â?? NPT, BSP, BSPT RANGE : Forged Fittings 15 NB to 100 NB in 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75. FORM : Elbow, Tee, Union, Coupling, Cap, Nipple, Bush, Plug, Hydraulic Fittings Features : Dimensional accuracy, Corrosion resistance, Excellent finish, High efficiency, Durable, Stainless Steel Forged Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Duplex Steel Forged Fittings : Standard� : ASTM / ASME A/SA 182 Grade� : F 44, F 45, F51, F 53, F 55, F 60, F 61 Aluminium Forged Fittings : Standard� : ASTM B247, B361. Grade� : 2024, 6061, 6063, 6101, 7075. Titanium Forged Fittings : Standard� : ASTM B381. Grade� : Grade 1, Grade 2, Grade 4, Grade 5, Grade 6, Grade 7, Grade 9, Grade 19, Grade 23 Carbon Steel Forged Fittings : Standard� : ASTM A 105/A694/ A350 LF3/A350 LF2. Grade� : F42/46/52/56/60/65/70 Low Temperature Carbon Steel Forged Fittings : Standard� : ASTM A 350 LF2 / A350 LF3 Alloy Steel Forged Fittings : Standard� : ASTM A182 Grade� : F1/F5/F9/F11/F22/F91 Copper Alloy Forged Fittings : Standard� : ASTM / ASME SB 61 / 62 / 151 / 152. Grade� : UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30) C 71640 Nickel Alloy Forged Fittings : Standard� : ASTM / ASME SB 564 / 160 / 472 â?¢ Nickel 200 â?? UNS N02200 � � â?¢ Nickel 201 â?? UNS N02201 � � â?¢ Monel 400 â?? UNS N04400 â?¢ Monel K500 â?? UNS N05500 � � â?¢ Inconel K600 â?? UNS N06600 � � â?¢ Inconel 601 â?? UNS N06601 â?¢ Inconel 625 â?? UNS N06625 � � â?¢ Inconel 800 â?? UNS N08800 � � â?¢ Inconel 800H â?? UNS N08810 â?¢ Inconel 825 â?? UNS N08825 � � â?¢ Hastelloy C276 â?? UNS N10276 � � â?¢ Alloy 20 â?? UNS N08020 Other : â?¢ Hydraulic Fittings � � � � â?¢ Instrumentation Fittings Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1 Types Of Forged Fittings â?¢ SS 310 / 310S Forged Fittings â?¢ Duplex Steel UNS S31803 Forged Fittings â?¢ Stainless Steel 304 / 304L Forged Fittings â?¢ Duplex Steel Forged Fittings â?¢ Stainless Steel 316 / 316L Forged Fittings â?¢ Duplex Steel UNS S32205 Forged Fittings â?¢ Stailess Steel 321 / 321H Forged Fittings â?¢ Super Duplex UNS S32750 Forged Fittings â?¢ Monel 400 Forged Fittings â?¢ Hastelloy C276 Forged Fittings â?¢ SS Forged Fittings â?¢ Steel Forged Fittings â?¢ Inconel 625 Forged Fittings â?¢ Alloy 20 Forged Fittings â?¢ Cu-Ni 70/30 (C71500) Forged Fitti
Product:Tube Fittings Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.3, based on 133 reviews price:Start from 5 USD Monel Tube Fittings, Inconel Tube Fittings, Hastelloy Tube Fittings, Copper Alloy Tube Fittings supplier. Stainless Steel tube fittings are manufactured and designed to meet the meticulous specifications necessary of industrial applications. RFP India tube fittings are generally used through the oil and gas, petro-chemical/chemical processing, pulp & paper, research laboratories, chemical processing, aerospace and defense, cryogenic and semiconductor, power generation, shipbuilding and heavy industrial industries. Available in several sizes and configurations, our SS tube fittings are made up of four parts including a body, back ferrule, front ferrule, and a nut. With fitting size range from 1/8 to 2 and with several choices in end patterns and connections, they are being rated to the highest working pressure of the suggested tubing.
Product: Buttweld Fittings Brand: Renaissance Pipe Fitting Inc. Sizes: Refer to the specification Condition: New Rating:4.4, based on 172 reviews price: Start from 15 USD Buttweld Fittings and socketweld Fittings in Stainless steel and seamless, Pipe Caps, ANSI B16.9 Fittings, carbon steel, ANSI B16.28 Fittings, Equal and reducing crosses, MSS-SP-43 Fittings, Equal and reducing tees, caps, Lap joint Stub End supplier. RFP India is exporters of butt weld fittings and prepares them in a range of designs as per the provisions of our customers. There are many types of fittings such as Seamless, Welded, Fabricated, and more with Stainless Steel Butt Weld Fittings, Duplex Steel Butt Weld Fittings, Aluminium Butt Weld Fittings, Titanium Butt Weld Fittings, Carbon Butt Weld Fittings, and so on. Made up of by using high standard quality material along with quite sophisticated and high machines, our variety of butt weld fittings is quite recognized for its zero-defects, superior performance, and high quality. These butt weld pipe fittings are made up of by using high standard quality stainless steel, making these fittings anti-corrosive, making them nonaligned, and as well as making them survive intense temperature conditions. Sourced from reliable vendors, these fittings are highly acknowledged for their high tensile strength, durability, and accurate alloy composition. We offer butt weld fittings in several types like elbow, tee, return bends, reducer, stub-ends, cap, cross, insert, collar, and more.
Our range of Butt Weld Equal Tee is available in various grades: Stainless steel astm, a403, wp304 / 304l / 304h / 316 / 316l / 317 / 317l / 321 / 310 / 347 / 904l Carbon steel astm, a234, wpb / a420, wpl3 / a420, wpl6 / mss-sp-75, wphy 42 / 46 / 52 / 56 / 60 / 65 / 70 Alloy steel astm a234 wp1 / wp5 / wp9 / wp11 / wp22 / wp91 Other metals offered for making butt weld pipe fittings : monel, nickle, inconel, hastalloy, copper, brass, titanium Size 1/8 nb to 48 nb (seamless & welded) wall thickness -sch. 5s to sch:xxs.
Copper Products Like Copper Plates Copper Drawn Flatch.
Product Name : Faucet Product Description : We supply faucets/ taps for washbasin, shower room, bathtubs, kitchen sink etc- brass, Stainless Steel, ABS with Chrome, Antique finish etc. Our faucets are tested for long use either with European make ceramic disc or Chinese make ceramic discs. Please contact us for details. Key Words : Faucets, Taps, shower Mixer, Bathtub mixer