Computer Scrap Suppliers and Manufacturers

Product Name: 3 Cut Tyre Scrap Description: 3 Cut Tyre Scrap consists of used tires that have been manually or mechanically cut into three pieces, typically across the tire's diameter. The scrap may contain tire tread, sidewalls, and bead wire segments. Specifications: Size: Pieces are generally cut into sections approximately 5 inches (12.7 cm) to 10 inches (25.4 cm) in width. Composition: Mainly composed of rubber, steel bead wire, and fabric remnants. Impurities: Minimal to no presence of foreign materials such as dirt, stones, or other contaminants. Moisture Content: Ideally less than 2% moisture by weight. Packaging: Typically shipped in bulk, bundled or loose, and packed into containers or shipped on pallets. Usage: 3 Cut Tyre Scrap is commonly used in various recycling and manufacturing processes to produce products such as rubber mulch, mats, and other recycled rubber goods. Packing & Shipment: Packaging: Bulk packaging in containers or on pallets. Loading: Loaded onto trucks or shipping containers as per customer requirements. Destination Port: To be specified by the buyer. Payment Terms: Negotiable, typically involving advanced payment or letter of credit. Quality Assurance: The product meets industry standards for recycled tire scrap and is inspected to ensure compliance with agreed-upon specifications. Environmental Considerations: Produced and handled in accordance with environmental regulations and guidelines, promoting sustainable recycling practices. Note: Specifications may vary slightly depending on supplier and customer requirements. Buyers are encouraged to request samples and inspect shipments before finalizing large orders.

Specification for Scrap Fridge Compressor Product Name: Scrap Fridge Compressor Purpose: The scrap fridge compressor is intended for recycling and recovery of materials from refrigeration units. It is designed to extract valuable metals such as copper, aluminum, and steel, as well as other recyclable components, from old or discarded refrigeration compressors. Dimensions and Weight: Dimensions: Typically measures approximately [insert dimensions] (may vary slightly depending on manufacturer and model). Weight: Varies, but generally ranges from [insert weight range] kilograms (kg). Materials Used: Shell: Steel or cast iron. Internal Components: Copper winding, aluminum wire, steel casing, and potentially other metals depending on the design and age of the compressor. Oil and Refrigerant: May contain residual oil and refrigerant, which need to be properly handled and disposed of according to environmental regulations. Condition: The scrap fridge compressor is generally considered non-functional and is obtained from discarded refrigeration units. It may show signs of wear, corrosion, or damage, typical of used or old compressors. Environmental Considerations: Contains materials that require environmentally responsible disposal or recycling methods. May contain oils, refrigerants, or other substances that are hazardous to the environment if not properly handled. Packaging: Typically sold loose or in bulk for scrap metal processing. Packaging, if any, should be minimal and not contribute to environmental waste. Safety Precautions: When handling scrap fridge compressors, wear appropriate personal protective equipment (PPE) such as gloves and safety goggles to avoid injury and contamination. Ensure compliance with local regulations regarding the handling, transport, and disposal of scrap metal and hazardous materials. Documentation: May come with basic documentation such as the model number (if identifiable), manufacturer (if identifiable), and any other relevant markings or labels that can assist in identifying its origin and composition. Usage: Intended for recycling purposes only. Can be processed to extract valuable metals and materials for reuse in manufacturing. Storage: Store in a dry and secure area away from moisture and direct sunlight to prevent further degradation. Disposal: Dispose of in accordance with local environmental regulations and guidelines. Recycle components where possible to minimize environmental impact. Additional Notes: Variations in specifications and components may exist depending on the specific model and manufacturer of the fridge compressor. Always verify the composition and condition of the scrap fridge compressor before processing or handling. This specification provides a comprehensive overview of the scrap fridge compressor, outlining its intended use, materials, environmental considerations, and safety precautions necessary for handling and disposal.

Specification for Scrap Electrical Motor General Description: The scrap electrical motor shall be an industrial or commercial-grade electric motor that is no longer operational or intended for reuse in its current state. Physical Characteristics: Dimensions: Provide approximate dimensions (length, width, height) of the motor. Weight: Specify the weight range of the motor. Appearance: Describe the external condition (e.g., rust, wear, intact casing). Electrical Specifications: Voltage Rating: Indicate the nominal voltage rating of the motor. Power Rating: Specify the power output in horsepower (HP) or kilowatts (kW). Phase: State whether the motor is single-phase or three-phase. Frequency: Specify the operating frequency (e.g., 50 Hz or 60 Hz). Mechanical Specifications: Type: Describe the type of motor (e.g., induction motor, synchronous motor). Enclosure: Specify the type of motor enclosure (e.g., open, totally enclosed). Shaft: Detail the condition and specifications of the motor shaft (e.g., diameter, keyway). Operational Condition: Functionality: Clarify whether the motor is inoperable or partially functional. Defects: Note any known defects or issues affecting operation. Environmental Considerations: Hazardous Materials: Identify any hazardous materials present (e.g., oil, heavy metals) and their safe handling requirements. Disposal Requirements: Specify disposal guidelines in accordance with local regulations. Packaging and Transportation: Packaging: Describe how the motor will be packaged for transport (e.g., palletized, boxed). Transportation: Provide guidelines for safe handling during transportation (e.g., lifting points, weight limits). Documentation: Certificates and Documentation: Include any certificates or documentation related to the motor's original specifications or hazardous material content. Additional Information: Purpose: State the intended use of the scrap motor (e.g., recycling, parts salvage). Availability: Specify quantity and availability of the scrap motors. Compliance: Regulatory Compliance: Ensure compliance with relevant safety and environmental regulations. Notes: This specification is intended to provide a comprehensive overview of the scrap electrical motor's characteristics and condition. It should be used to accurately assess the motor's suitability for recycling or other intended purposes. Any additional specific requirements should be clearly outlined based on the intended use and local regulatory requirements.

Specification for Scrap Aluminum 6063 Product Name: Scrap Aluminum 6063 Material: Aluminum alloy scraps primarily consisting of AA6063 grade Condition: Clean, uncoated, uncontaminated with other materials Form: Extrusions, profiles, or sheets Should be free of any attachments such as screws, iron, plastic, or other metals Chemical Composition: Aluminum: 98.5% min Magnesium: 0.45% - 0.9% Silicon: 0.2% - 0.6% Iron: 0.35% max Copper: 0.1% max Manganese: 0.1% max Zinc: 0.1% max Titanium: 0.1% max Packaging: Packed in bundles or loose as per agreement Clearly labeled with product details including alloy type and quantity Suitable packaging for transportation and storage Size: Pieces should be of a size convenient for handling and melting Typically in the form of long bars, rods, or sheets Origin: Derived from industrial or consumer aluminum products, processed for recycling purposes Applications: Used as raw material for remelting and casting purposes Suitable for manufacturing aluminum alloys, extrusions, and various industrial products Certifications: Certificate of analysis confirming alloy composition and purity Compliance with international standards (e.g., ISRI specifications) Note: This specification provides a general outline for Scrap Aluminum 6063. Specific requirements may vary based on supplier agreements, regional standards, and customer needs.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Description: UBC scrap refers to Used Beverage Can scrap, which consists of aluminum cans that have been discarded after use. These cans are typically collected for recycling purposes due to the valuable aluminum content they contain. UBC scrap is a crucial raw material in the aluminum recycling industry, contributing significantly to the production of new aluminum products. Specifications for UBC Scrap: Material Composition: UBC scrap consists primarily of used aluminum beverage cans. The cans should be free from any other materials such as plastic, glass, or organic matter. Size and Form: UBC scrap should be compacted or shredded aluminum cans. Individual cans should be flattened or crushed to facilitate handling and transportation. Purity and Contaminants: UBC scrap should have minimal contamination from non-aluminum materials. Contaminants such as food residue, labels, and coatings should be removed to the extent possible. Chemical Composition: Aluminum content should typically be high, with purity levels suitable for recycling into new aluminum products. Alloy specifications may vary depending on regional standards and recycling processes. Packaging and Transport: UBC scrap is usually packaged in bales, bundles, or loose depending on the recycling facility's requirements. Packaging should be suitable for transportation and storage, ensuring minimal damage and loss during handling. Environmental Considerations: UBC scrap should meet environmental regulations regarding recycling and disposal of used aluminum cans. Recycling processes should comply with local environmental standards to minimize environmental impact. Quality Standards: Quality standards for UBC scrap may include specifications on size consistency, cleanliness, and purity levels. Compliance with industry standards ensures the scrap is suitable for efficient recycling processes. Application: UBC scrap is used as a feedstock for aluminum smelting and recycling operations. It plays a crucial role in the circular economy by conserving natural resources and reducing energy consumption compared to primary aluminum production. Testing and Inspection: UBC scrap may undergo testing and inspection to verify compliance with specified standards. Quality control measures may include visual inspection, chemical analysis, and physical testing to ensure suitability for recycling. Market Considerations: Prices for UBC scrap may vary based on global aluminum market trends, demand-supply dynamics, and recycling efficiencies. Market participants include scrap dealers, recyclers, aluminum manufacturers, and industries utilizing recycled aluminum. By adhering to these specifications, UBC scrap can be effectively managed, processed, and recycled to contribute to sustainable resource management and environmental conservation efforts.

Can supply: LDPE FILM MIX COLOR (JAZZ) BALES SCRAP / WASTE. post consumer. Can load in 1x40HC container aprox. 26 MT (10%) net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

We can supply: PVC RIGID WINDOW-DOOR PROFILE MIX COLORS (WHITE AND BROWN) CUTTINGS BALES. Post industrial. Can load in 1x40HC container aprox. 25 MT (�± 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials.

Can supply: PP BAGS - SUPER SACK BALES SCRAP - WASTE. Post commercial. Can load in 1x40HC container aprox. 26 MT (10%) net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: PP CUPS, BUCKETS BALES 550 EURO/MT FAS THESSALONIKI PORT GREECE. Post consumer. Can load in 1x40' HC container aprox. 26- 28 MT (�± 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: HDPE BOTTLES, Barrels, Dispencers Bales. Can load in 1x40 HC approx. 25 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: UPVC Rigid Window-door Profile Cuttings Mix Colour (White And Brown) Bales. Post industrial. Can load in 1x40' HC container approx. 25 MT (10%) Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: SELVEDGES (RAMA - STRING) MIX COLORS AND MIX QUALITY (COTTON, COTTO/LYCRA etc.) BALES. For the production of bath rugs or carpets, women bags etc. Post industrial. Can load in 1x40HC container aprox. 25 MT net. Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade. Post industrial. Materials are bulk. Can load bulk in 1x40' Open Top container approx. 20-24 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: PE BLUE CAPS BALES SCRAP / WASTE. Can load in 1x40 HC approx. 20 MT. Ready for shipment. Photos are available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

Aluminum Scrap Specification 1. General Requirements Material: Aluminum scrap, free from iron, steel, and other contaminants. Form: The scrap may be in various forms, including but not limited to, sheets, turnings, castings, extrusions, or beverage cans. Color: Predominantly silver, may include anodized or coated pieces. 2. Quality Standards Purity: Minimum 95% aluminum content. Contaminants: Non-aluminum metals (e.g., copper, zinc): Max 2%. Organic material (e.g., paint, plastic): Max 1%. Moisture: Max 0.5%. Dirt and other non-metallic impurities: Max 1%. 3. Physical Characteristics Size: Sheets: No dimension exceeding 1 meter. Turnings: Free-flowing, dry, with no clusters exceeding 20 cm in diameter. Castings and extrusions: No piece exceeding 50 cm in any dimension. Weight: Scrap should be delivered in bulk or bundled form, each bundle not exceeding 1 metric ton. 4. Packaging Bulk: Loose scrap should be delivered in durable containers suitable for handling and transport. Bundles: Bundled scrap should be securely tied and stable for transport and handling. 5. Delivery Inspection: Material will be inspected upon receipt for compliance with the specified requirements. Documentation: Each shipment should be accompanied by a certificate of analysis indicating the aluminum content and a detailed list of any contaminants present. 6. Safety and Environmental Considerations Handling: Scrap must be free from hazardous materials and handled in a manner compliant with local safety regulations. Environmental: Supplier must adhere to all relevant environmental regulations regarding the recycling and transport of aluminum scrap.

Can supply: PLASTIC FILM LAMINATED - MIX QUALITY (PP, PET, PA, PE etc) AND MIX COLOR BALES SCRAP/WASTE. POST INDUSTRIAL. Can load in 1x40HC container approx. 26 28 MT (+ 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

Can supply: PC BOTTLES (LIGHT BLUE COLOR) BALES. Post industrial and post commercial. Bottles did not contain liquid inside due to the big pressing force of our baler machine. We have one of the strongest baler in Europe. Can load in 1x40HC container approx. 22 MT ( 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.