Coal, Mining..
Indonesian South African Coal we have coal of different specification from Indonesia, South Africa and Australia.
Coal-tar pitch is a thick black liquid that remains after the distillation of coal tar. It is used as a base for coatings and paint, in roofing and paving, and as a binder in asphalt products.
U36 Shaped Steel Support Keywords: U Shaped Steel Support, Steel Roof Support Beam, Roof Support Beams Price Introduction of U36 Shaped Steel Support U36Â steel support is mainly used for mine tunnel, mine tunnel secondary support, as well as support through the mountain tunnel support purposes. U-shaped steel bracket Features: withstand pressure, support long time, easy to install and easy to deformation characteristics. 36U steel frame consists of a roof beams, two legs, four card cable, two bottom feet composition. Mainly used in mine tunnel, mine tunnel secondary support, as well as support through the mountain tunnel support and so on. Product characteristic of U36 Shaped Steel Support 1 Bear heavy pressure , support long time, has the characteristics of easy installation and not easily out of shape 2 Carrying capacity of the yielding and stable and reliable, to adapt to the load and deformation of the soft surrounding rock 3 The section utilization ratio is high, support the back is convenient, small amount of maintenance. 4 High rate of recovery and reuse, reduce timber use and environmental benefit is obvious. P
china coal0001 Q235 SS400 U Type Arch Steel for Mine Timbering Keywords: U Channel Steel Supports, U Arch Steel, Roof Support Beams Introduction of Q235 SS400 U Type Arch Steel for Mine Timbering Q235 SS400 U Type Arch Steel for Mine Timbering is ideal for all support timbering applications where greater strength and superior corrosion resistance is required. Stainless Channel has a durable dull, mill finish that is widely used for all types of fabrication projects that are exposed to the elements - chemical, acidic, fresh water, and salt water environments. The standard length for most size channel is 12â??-14â?? random lengths, but lengths are available in some sizes up to 20â?? and longer. Finishes on channel can vary and include cold drawn, centerless ground, smooth turned, rough turned, turned ground and polished, and HRAP. We will custom saw cut to length. DEFARS or domestic material available in many sizes. Polishing services are available. Main Parameter of Q235 SS400 U Type Arch Steel for Mine Timbering GradeSS400 Q235 A36 Web width50mm-320mm Web thickness4.5mm-9.5mm Flange width37mm-88mm StandardGB JIS ASTM Length 6/9/12m Size 50mm*37mm*4.5mm-320mm*88mm*8mm Applications building
Technical Data Sheet Included In Images
Thermal Coal $200.00 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 Coking Coal $156.00 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 Steam Coal $$126 per MT X12 months, trial shipment 10,000 MT to 50,000 MT, and monthly shipment maximum 50,000 I have contact with Indonesia coal seller as well and its price for Steam Coal is $215 per MT We also have Manganese Ore as well Once I got your contact information, I will send you the Specification, selling procedures, and or SCO to you for your review
Quality : Coal calorie 5800-5500 & 6100-5800. Quantity : min. 20.000 ton/month Barge/tongkang
Anthracite is the highest rank coal and is characterized buy low volatile matter (always less than 10%) and high carbon content. It has a semi- metallic luster and is capable of burning without smoke. Semi- anthracite is coal midway between low volatile bituminous coal and anthracite. (1-6 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 3 % Moisture no more than 9.5 % Lowest heat of combustion (GCF) at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % (0.2-1 �?�?) Ash content for dry condition no more than 30 % Volatile substances no more than 6 % Moisture no more than 10 % Lowest heat of combustion at least 5,000 kcal/kg Total sulfur for dry condition no more than 1 % (6-13 �?�?) Ash content for dry condition no more than 4 % Volatile substances no more than 4 % Moisture no more than 8 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 18 % (13-25 �?�?) Ash content for dry condition no more than 5 % Volatile substances no more than 3.5 % Moisture no more than 6.5 % Lowest heat of combustion at least 7,200 kcal/kg Total sulfur for dry condition no more than 1 % Trivia Content no more than 17 %
We inform our real intention to sell and deliver Type A Thermal Coal Ore, following international procedures under the following Terms and Conditions: Product: THERMAL COAL TYPE A Origin: Colombian Minimum Quantity: 30,000 Tons in 45 days (+/-) Full Contract: 12 months extendable, at the end of each period and increase in quantity if the parties so Price: Negotiable Port Delivery: FOB â?? Available Port â?? Lycan 45 days after firm contract Port of Destination: Any port Quality of product: Type A 7200-7400 Ptu/Kg Ptu/lb14400-14800 Ash: less 10% Sulfur: less 1.00% Volatile: Between 38.6-40.5%. Inspection: Inspection of quantity and quality by a certified laboratory for export: (SGS) or similar at the port of loading, on the ship loaded at the buyer's expense.
FIXEDCARBON 95%MIN SULPHUR 0.3% ASH 3.5%,MAX VOLATILE MATTER 1.5%MAX MOISTURE 0.5%MAX SIZE 1.5
PDC drill bit is super hard material combined with diamond and hard alloy under high temperature and high pressure. It not only has the advantages of hard and durable from diamond, but also has the advantages of high impact resistance and big blade from hard alloy. It greatly improves the drilling efficiency and is the ideal drill bit for the drill operation of medium & hard as well as super hard rock. The carrier of PDC bits is forged and pressed by first-class steel. Its mechanical capacity is strengthened by fully automatic vacuum heat treatment equipment. The ordinary type adopts Chinese PCD as its blade, while the super-strong type adopts American blade made by GE. Choosing proper type makes high ratio of performance and price.
2 or 3 wings whole piece pdc drill bit for sandstone drilling with 1-4 water holes. PDC drill bit is super hard material combined with diamond and hard alloy under high temperature and high pressure. It not only has the advantages of hard and durable from diamond, but also has the advantages of high impact resistance and big blade from hard alloy. It greatly improves the drilling efficiency and is the ideal drill bit for the drill operation of medium & hard as well as super hard rock. The carrier of PDC bits is forged and pressed by first-class steel. Its mechanical capacity is strengthened by fully automatic vacuum heat treatment equipment. The ordinary type adopts Chinese PCD as its blade, while the super-strong type adopts American blade made by GE. Choosing proper type makes high ratio of performance and price. Our PCD drill bits are widely used in all industries, such as coal mining, oil exploration, geological exploration, water and hydroelectric, railway and road, tunneling construction and so on. Two-wing PDC anchor bit (standard type) is applied to the hardness not bigger than f8. The working life is 10-30 times of the ordinary alloy bits, and the efficiency could be improved by 60%. Besides, the PDC bits dont require figuring, which lows the labor intensity and helps to saves cost. GE, American company, produces the main material of the blade for two-wing PDC anchor bits (strengthened type). The diamond content is 1.5 times of the ordinary bits, which has excellent abrasive resistance and applied to medium and hard rock (fâ?¤12). Super strengthened PDC bits adopt newly designed ball type diamond as its blade. 2 or 3 wings whole piece pdc drill bit for sandstone drilling with 1-4 water holes.
Gcv: 5500 - 5300 Gcv: 5800 - 5600 Gcv: 6000 - 5800 Gcv: 6300 - 6100 Gcv: 6500 - 6300 Gcv; 6700 - 6500 Bulk - metric ton
SUB BITUMINOUS COAL (SOLID FUEL)
.Fix carbon 95% Calcined anthracite coal for sale Anthracite Filter Media is thoroughly selected from anthracite which yields the highest percentage of carbon. It is then hydraulically classified to reduce mineral matter and ash to a minimum, and finally screened and washed to ensure suitability for filtration purposes. Anthracite filter coal or Anthrafilt is commonly used as sub-fill and as a component of multi-media filters. Anthracite filter media is a durable media with long life and a wide temperature range. It contains no silica to interfere in the production of ultra pure water. Anthracite promotes higher service flow rates and longer filter runs with less head loss than single media filter beds. Backwash rates are reduced as well. Low uniformity coefficient anthracite filter media extends the life of your filter before the media must be changed out. Higher service flows and longer filter runs than equivalent sand filters. â?¢ Unique density allows Anthracite to be combined with other filtration media in multi-media filters. â?¢ Lower uniformity coefficient has less oversized and undersized particles resulting in a highly uniformed bed. â?¢ Due to its medium density, Anthracite can be used in multi-media bed filters providing a unique pre-filtration layer. Anthracite coal filter media Application Anthracite Filter Media is widely used in the process of water quality treatment before and after the production of chemical, metallurgical, thermoelectric, pharmaceutical, papermaking, printing and dyeing, food and so on.
With export operations in Kazakhstan representing leading high-grade coal producers, and distribution operations in UK and Europe, we deliver metallurgical coal, steaming coal and iron ore to meet the urgent needs of industry and energy supply.
Our Coal Mines range from Gar 4000-7000
Functions and features: infrared to see in 30m/60m/80m distance etc. infrared light automatically start to work when there is less light, it could work at night or there is poor light sum Use unique special explosion proof glass, high light flux rate,avoid infrared light spot Nanometer invisible features, rain wiper functions,non-stick water,non-stick oil, Exclusion of dust High hardness and high quality carbon steel material, surface coated processing technology Optional to add some functions according to customer requirements: e.g.:internet module, Optical transceiver module,wireless transceiver module, heating device
Commodity : Thermal Coal Origin : South Kalimantan Indonesia Order Term :FOB Mother Vessel Quantity : 150.000MT./month contract 12 months revise price every 3 months Size : 0-50mm ( 80-90%) Loading Port : Taboneo Inspection : Sucofindo, Geoservice, CCIC or SGS (Independent Surveyor) Loading Schedule : last week of Desember 2019 Payment Term : LC at sight (100%) FOB Mother Vessel ( Note : Mother Vessel are prepaired by Buyer include Crane & Grab coal utility ) Our Available Coal Specifications : -Report of Analysis SGS BS19-00094 date issued 14 May 2019 -Gar 6305 Kcal/kg contact Mr Paul Ricardo email : paul-ricardo@nhs-coal.page Ready stock 50.000 mton
